Scribd
Upload
14 views

Assignment 1

This document provides specifications for designing the reinforced concrete girder of a floor plan. It lists the material strengths, dimensions, and loads, including a live load of 2.0 kN/m^2 and floor covering load of 2.0 kN/m^2. It also gives the dimensions of 400x800mm for the girder and requests calculating the ultimate external loads and internal forces on the girder, and designing its critical sections for flexure, shear, and possible torsion.

Uploaded by

Mahmoud Abbass
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
14 views

Assignment 1

This document provides specifications for designing the reinforced concrete girder of a floor plan. It lists the material strengths, dimensions, and loads, including a live load of 2.0 kN/m^2 and floor covering load of 2.0 kN/m^2. It also gives the dimensions of 400x800mm for the girder and requests calculating the ultimate external loads and internal forces on the girder, and designing its critical sections for flexure, shear, and possible torsion.

Uploaded by

Mahmoud Abbass
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Benha University

Faculty of Engineering- Shoubra


Civil Engineering Department
second Year Civil

Date: 21 / 3 / 2016
Subject: Reinforced Concrete

For the shown floor plan, the following data are given:
Fcu= 25 MPa
Fy=360 MPa
Fyst= 240 MPa
Slab thickness =140mm
Floor Cover (F.C) =2.0 KN/m2
Live load (L.L) =2.0 KN/m2
g wall = 2.0 KN/m2 (on all beams and girders)
Story height =3.3 m
Parapet height =1.2 m
Dimensions of girder = 400x800
Dimensions of beams B1 = 250x500
Dimensions of beams B2 = 300x700
It is required to: (FOR GIRDER ONLY)
1-Calculate the external ultimate loads and internal forces
2-Design the girder critical sections for flexure, shear, torsion (if any)

You might also like