Scribd
Upload
49 views

Fall 2014 Computer Communication Networks HW#7 (Due Date: 2014/11/26)

This document contains instructions for homework assignment 7 for a computer communication networks course due on November 26, 2014. It includes 3 questions: 1) Draw a flow diagram showing the operation of a stop-and-wait ARQ protocol over 4 frames with a round trip delay of 4ms and no lost frames. 2) In a pure ALOHA network with 100 stations, if the frame transmission time is 1 μs, calculate the maximum number of frames per second each station can send. 3) Calculate the minimum frame sizes needed for collision detection in a CDMA network with data rates of 10 Mbps, 100 Mbps, 1 Gbps, and 10 Gbps, given the minimum is 512 bits at 10 Mbps.

Uploaded by

Tài Lâm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views

Fall 2014 Computer Communication Networks HW#7 (Due Date: 2014/11/26)

This document contains instructions for homework assignment 7 for a computer communication networks course due on November 26, 2014. It includes 3 questions: 1) Draw a flow diagram showing the operation of a stop-and-wait ARQ protocol over 4 frames with a round trip delay of 4ms and no lost frames. 2) In a pure ALOHA network with 100 stations, if the frame transmission time is 1 μs, calculate the maximum number of frames per second each station can send. 3) Calculate the minimum frame sizes needed for collision detection in a CDMA network with data rates of 10 Mbps, 100 Mbps, 1 Gbps, and 10 Gbps, given the minimum is 512 bits at 10 Mbps.

Uploaded by

Tài Lâm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Fall 2014 Computer Communication Networks

HW#7 (Due date: 2014/11/26)


Question 1:
The timer of a system using the Stop-and-Wait ARQ Protocol has a
time-out of 6 ms. Draw the flow diagram similar to the figure below for
four frames if the round trip delay is 4ms. Assume no data frame or
control frame is lost or damaged.

Question 2:
We have pure ALOHA network with 100 stations. If Tfr=1 s, what is the
number of frames/s each station can send to achieve the maximum
efficiency.
Question 3:
In a CDMA/CD network with a data rate of 10 Mbps, the minimum frame
size is found to be 512 bits for the correct operation of the collision
detection process. What should be the minimum frame size if we
increase the data rate to 100 Mbps? To 1Gbps? To 10Gbps?
Please answer the questions in your own words.

You might also like