Scribd
Upload
30 views

Industrial Cleaning Tools - Rotary Tools: Features & Benefits

This document describes industrial rotary cleaning tools that use an air turbine motor to drive cleaning heads through tubes at high speeds, removing deposits. The tools can clean straight tubes from 0.495 to 13.225 inches and curved tubes from 0.791 to 13.225 inches. The cutting heads are designed so that each tooth contacts the tube at a slightly different point with each revolution to remove all deposits without damaging the tube. Accessories like filters and lubricators are available to suit various cleaning requirements.

Uploaded by

Amin Syah
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
30 views

Industrial Cleaning Tools - Rotary Tools: Features & Benefits

This document describes industrial rotary cleaning tools that use an air turbine motor to drive cleaning heads through tubes at high speeds, removing deposits. The tools can clean straight tubes from 0.495 to 13.225 inches and curved tubes from 0.791 to 13.225 inches. The cutting heads are designed so that each tooth contacts the tube at a slightly different point with each revolution to remove all deposits without damaging the tube. Accessories like filters and lubricators are available to suit various cleaning requirements.

Uploaded by

Amin Syah
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Industrial Cleaning Tools - Rotary Tools

The air turbine style motor design provides an immediate and powerful startup to drive the cleaning head down the tube
at high speed, removing light to heavy deposits of scale, mud and other process residues
The range of tools cover straight tubes from .495 to 13.225 and curved from .791 to 13.225
The tools come with a choice of a wide selection of cutter heads which are manufactured to ensure that any one tooth
does not return to the same point in the tube in successive revolutions of the head. As a result, each tooth contacts at a
slightly advanced point, effectively removing all deposits but preventing a tooth design in the tube
Features & Benefits
Powerful motor design allows for immediate motor startup.
The motor requires no special tools for repair.
Armored hose design for rigidity and heat resistance
Requirements
Compressed Air Pressure required is:
11-26 CFM @ 80 PSI (5.5 bar) for 0.495 to 1.730 ID tubes
65-135 CFM @ 80 PSI (5.5 bar) for 1.75 to 3.999 ID tubes
80-200 CFM @ 80 PSI (5.5 bar) for 2.25 to 13.225 ID tubes
Accessories
Filter Lubricator and Foot Valves to suit your requirements

Unit 2
Bredgar Road Industrial Estate
Bredgar Road, Gillingham
Kent ME8 6PL UK
Telephone
01634 267070

Facsimile
01634 267079

Email
[email protected]

Internet
www.airnesco.com

You might also like