Scribd
Upload
23 views

EOE-081 Non-Conventional Energy Resources: UNIT-1

1. The document discusses various non-conventional energy resources including solar energy, wind energy, tidal energy, bio-energy, and fuel cells. 2. It provides details on the working of tidal power plants, which use the difference in water levels between a constructed basin and the sea during high and low tides to drive turbines and generate electricity. 3. The advantages of tidal power plants are discussed, including being pollution-free and providing a more certain supply than hydroelectric plants, which depend on rainfall levels. However, high capital costs and difficulties with sedimentation are disadvantages.

Uploaded by

shylaja9
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
23 views

EOE-081 Non-Conventional Energy Resources: UNIT-1

1. The document discusses various non-conventional energy resources including solar energy, wind energy, tidal energy, bio-energy, and fuel cells. 2. It provides details on the working of tidal power plants, which use the difference in water levels between a constructed basin and the sea during high and low tides to drive turbines and generate electricity. 3. The advantages of tidal power plants are discussed, including being pollution-free and providing a more certain supply than hydroelectric plants, which depend on rainfall levels. However, high capital costs and difficulties with sedimentation are disadvantages.

Uploaded by

shylaja9
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 18

EOE-081

NON-CONVENTIONAL ENERGY
RESOURCES
UNIT-1

Syllabus
Introduction
Various non-conventional energy resourcesIntroduction, availability, classification,
relative, merits and demerits.
Solar Cells:
Theory of solar cells. solar cell materials, solar
cell array, solar cell power plant, limitations.

Introduction
Conventional energy sources
Conventional energy sources are:
(a) Fossil fuel energy
(b) Hydraulic energy
(c) Nuclear energy

Non-Conventional Energy Sources


The sources of energy which are being produced
continuously in nature and are in exhaustible are
called renewable sources of energy (or) nonconventional energy.
Some of these sources are:
(a) Wind energy
(b) Tidal energy
(c) Solar energy

Wind energy
Winds are caused because of two factors.
1. The absorption of solar energy on the earths
surface and in the atmosphere.
2. The rotation of the earth about its axis and its
motion around the Sun.
A wind mill converts the kinetic energy of moving
air into Mechanical
energy that can be either used directly to run the
Machine or to run the generator to produce
electricity.

Tidal energy
Tides are generated primarily by the
gravitational attraction between the earth and
the Moon. They arise twice a day in MidOcean. The tidal range is only a Meter.
Basically in a tidal power station water at high
tide is first trapped in a artificial basin and
then allowed to escape at low tide. The
escaping water is used to drive water turbines,
which in turn drive electrical generators.

Solar energy
Brief history of solar energy (or) Importance of
solar energy:
Energy from the sun is called solar energy. The
Suns energy comes
from nuclear fusion reaction that take place deep
in the Sun. Hydrogen
nucleus fuse into helium nucleus. The energy
from these reactions flow out
from the sun and escape into space.

Bio- Energy
Bio Mass means organic matter and Photo
Chemical approach to harness solar energy
means harnessing of solar energy by photo
synthesis.
Solar energy is stored in the from of chemical
energy. Hence solar energy > Photosynthesis
> Bio Mass->energy generation.

Tidal Energy
Tide is periodic rise and fall of the water level of the sea.
Tides occur due to the attraction of seawater by the moon.
These tides can be used to produce electrical power which
is known as tidal power.
A dam is constructed in such a way that a basin gets
separated from the sea and a difference in the water level
is obtained between the basin and sea. The constructed
basin is filled during high tide and emptied during low tide
passing through sluices and turbine respectively.
The Potential energy of the water stored in the basin is
used to drive the turbine which in turn generates electricity
as it is directly coupled to an alternator.

Advantages of Tidal Power Plants


Exploitation of tidal energy will in no case make
demand for large area of valuable land because they
are on bays.
It is free from pollution as it does not use any fuel.
It is much superior to hydro-power plant as it is totally
independent of rain which always fluctuates year to
year. Therefore, there is certainty of power supply a
the tide cycle is very definite.
As in every form of water power, this will also not
produce any unhealthy waste like gases, ash, atomic
refuse which entails heavy removal costs.

Tidal Power is superior to conventional hydro power as the


hydro plants are know for their large seasonal and yearly
fluctuations in the output of energy because they are entirely
dependent upon the natures cycle of rainfall, which is not the
case with tidal as monthly certain power is assured. The tides
are totally independent on natures cycle of rainfall.
Another notable advantage of tidal power is that it has a
unique capacity to meet the peak power demand effectively
when it works in combination with thermal or hydroelectric
system.
It can provide better recreational facilities to visitors and
holiday makers, in addition to the possibility of fish forming in
the tidal basins.

Disadvantages

These Power plants can be developed only if natural sites are


available.
As the sites are available on the bay which will be always far
away from the load centers. The power generated must be
transported to long distances. This increases the transportation
cost.
The supply of power is not continuous as it depends upon the
timing of tides.
The capital cost of the plant (Rs.5000/kw) is considerably
large compared with conventional-power plants (hydro,
thermal)
Sedimentation and siltation of the basins are some of the
added problems with tidal power plants.
The navigation is obstructed.

Fuel Cells
Fuel Cells are efficient and quiet, operate on a
variety of hydrocarbon fuels, and produces
almost no objectionable emissions.
The recent infusion of power cost from fossil
fuels may convert this promising device into a
major source of electric power generation.

Advantages of Fuel Cells

The fuel cell converts its fuel directly to electric power.


Pollutant levels range from 1/10 to 1/50,000 of those produced
by a fossil fuel power plant as there it no combustion.
As it does not make noise. It can be readily accepted in
residential areas.
The fuel cell takes little time to go into operation.
It would be an ideal reserve power source with in large
conventional power plants to handle peak or emergency loads.
There is no efficiency penalty for part load operation.
Efficiency remains constant from 100% to 25 % of rated load.

There is no maximum or minimum size for a fuel cell power


plant. Individual fuel cells are joined to from stacks.
The land requirement is considerably less compared with
conventional power plants.
Possibly the greatest advantage of the fuel cell is its high
operating efficiency. Present-day fuel cell efficiency is 38%
and it is expected to reach to 60% before the end of this
century.
A wide variety of fuels can be used with the fuel cell.
Although presently limited to using substances that produce
pure H2 rich gas, the cell may one day be able to operate on
fuels derived from low grade shale oils or highly sulfur coals.

Availability of Conventional Energy


Resources

The maintenance charges are low as there are no moving parts


and outages are also less.
Fuel cells have an overload capacity of 50 to 100% for a short
duration.
The weight and volume of the fuel cell is considerably low
compared to other energy sources.
In H2-O2 cell, the reaction product is water which is portable.
No cooling water is needed so it can be located at any desired
place.

Solar Cells
Solar cells , the basic unit block of a solar photovoltaic systems ,
comprises of two or more especially prepared layers of
semiconductor materials processed with an additive that causes
the device to become photosensitive.
When photons strike the surface the surface of the solar cell
,electron hole pairs are released , generating a flow of electricity.

Thus, a solar cell is a transducer


radiation directly into electricity.

which converts the solar

Theory of Solar Cells


Solar cells are composed of mostly 95% of
silicon(Si) semiconductor material .
It consists of a thin slice of crystal p-type
silicon into a very thin layer of n-type material
is diffused

You might also like