Scribd
Upload
122 views

UT81A - B - C Computer Interface Software PDF

The document provides instructions for installing and using UT81A/B/C Interface software to connect a multimeter to a computer. It outlines the system requirements, hardware installation process, software installation steps, and basic functions of the interface program. The key points are: - The software allows users to connect a USB multimeter to a Windows computer to log and display measurement readings. - Installation requires inserting the provided CD, navigating to the setup file, and following on-screen prompts. - Once installed, the program can be launched to connect to the multimeter and record, display, and save measurement data in graphical or text formats. - Basic functions accessible from the interface include setting sampling

Uploaded by

juan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
122 views

UT81A - B - C Computer Interface Software PDF

The document provides instructions for installing and using UT81A/B/C Interface software to connect a multimeter to a computer. It outlines the system requirements, hardware installation process, software installation steps, and basic functions of the interface program. The key points are: - The software allows users to connect a USB multimeter to a Windows computer to log and display measurement readings. - Installation requires inserting the provided CD, navigating to the setup file, and following on-screen prompts. - Once installed, the program can be launched to connect to the multimeter and record, display, and save measurement data in graphical or text formats. - Basic functions accessible from the interface include setting sampling

Uploaded by

juan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

UT81A/B/C Interface Software Manual

System Requirements(UT81A/B/C)
To use UT81A/B/C Interface Program, you need the following hardware and software:
An IBM PC or equivalent computer with 80586 or higher processor and 600 x 800 pixel or better monitor.
Microsoft Windows 98,Window2000.window NT,Windows ME. Windows XP, Windows VISTA,Windows 7.
At least 128MB of RAM.
Can access to a local or a network CD-ROM.
A usb port.
A mouse or other pointing device supported by Windows.

Hardware install:
If what to use is multimeter the USB provide with the form connect a people's line, the USB pick up a people line of
red unauthorized biography lose the line to receive to carry to insert multimeter fix in the slot with a back of the form
protection, then go on-line of another on carry with computer of string a right conjunction is then.

Installing UT81A/B/C Interface Program


To install UT81A/B/C Interface Program, please follow below procedure:
Before install the interface program, make sure that the computer is running the Window 98 or above operating system.
1.Insert the provided CD-ROM into CD-ROM drive.
2.Double-click the My Computer icon from the Windows desktop.

Double click to install


(figure 1)
3.click UT81A/B/C Setup to display the contents of the folder.Double-click the file Setup.Exe.

UT81A/B/C Interface Software Manual

(figure 2)
4.Follow the on-screen installation instructions.

(figure 3)

UT81A/B/C Interface Software Manual


5. Until the software installs to complete.

(figure 4)

6. The software installs to complete, the customer can find out" the DMM Interface Program- UT81A/B/C" in program folder.
click to Test
(figure 5)

Getting Started with UT81A/B/C Interface Program


.From the Windows Start menu, choose Programs > DMM > UT81A/B/C
Press USB connect
Press Connect from menu bar to start the connection, the icon will be displayed.
Below is the full screen of the software shown on the computer .

UT81A/B/C Interface Software Manual

Connect states

LCD Display

Sampling Control Area


Records Area

Graphic area

(figure 6)

Data record

Repeat

Sampling interval

Clear

Open

Save

Print

(figure 7)
During the connection, you can select the following functions by clicking the corresponding icon or the menu bar:
Repeat: Click the box to keep the repeated record, or unclick the box to ignore the repeated record. The
repeated records will be shown in graphic no matter what the selection is.
Sampling Interval: Click to enable sampling interval function, or unclick to disable the function
Enter the sampling intervals time, the unit is second.
Clear: To clear all the current records permanently.
Open : To read records form old file (*.xls,*.txt,*.xml) .
Save: To save all the current records to file (*.xls,*.txt,*.xml).
print: To print the current records.

UT81A/B/C Interface Software Manual

Graphic operation

Fill

Record

Save First Previous Next Last

Zoom

(figure 7)

During the connection, you can select the following functions by clicking the corresponding icon or the menu bar:
Fill: Click the box to select fill-up graph or unclick to select line graph.
Record: Setting the number of record to be shown on graphic.
Clear: To clear all the current records graphics permanently.
Save: To save current graphic into BMP format.
First: Go to the first graphic.
Previous: Go to the previous graphic.
Next: Go to the next graphic.
Last: Go to the last graphic.
Zoom : To enlarge part of the graphic.

Maximum Number of Records Setting


After testing, below list out a normal maximum number of records that a computer can be saved for users reference. The computer will
slow down if it exceeds the maximum. 80486 computer: 1000 to 5000 records 80586 computer: 5000 to 50000 records Pentium 2 or up:
50000 records up To set the maximum number of records from the Recordof the menu bar.

You might also like