Scribd
Upload
2K views

BBNL Mobile App User Guide

This document provides instructions for using the BBNL Mobile App. It explains how to download and install the app, log in with valid credentials, select work locations and types, capture GPS coordinates and photos for points of activity, and save, continue, or end routes. It also describes using the app in online or offline mode and exiting the app. Standard login credentials are provided for supervisors and contractors in four districts.

Uploaded by

Bimal Jain
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2K views

BBNL Mobile App User Guide

This document provides instructions for using the BBNL Mobile App. It explains how to download and install the app, log in with valid credentials, select work locations and types, capture GPS coordinates and photos for points of activity, and save, continue, or end routes. It also describes using the app in online or offline mode and exiting the app. Standard login credentials are provided for supervisors and contractors in four districts.

Uploaded by

Bimal Jain
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

BBNL Mobile App User Guide

Download the application setup file (BBNL-04092016-v1.65.apk) and install.

After successful installation, Click on


BBNL icon to open application icon.

It will go to the application home page.


Click continue to go to the login page

Enter the valid credentials i.e., Username


and Password. Only one time login is
required to fetch the GP and activity lists.
Internet connection is required for login.
There is no need to login again as long as
the user remains the same. If another user
is to use the phone, then logout and login
as a different user. Before going out to
the field it is to be ensured that the
correct user is logged in.
If you have forgotten password, click on
'Forgot Password', to get the following
screen:
Enter the username and click 'Resend
Password by SMS'. Password will be
sent to the registered mobile number of
the user

Once logged in, On the screen GP and


Work Type, the username is displayed on
top right corner.
To change your password, click on the
icon
the left of GP and Work Type.
Screen shown on the left opens.

Select 'Change Password'. The screen to


change password opens.

Enter the current password and the new


password and press 'submit'. To change
mobile number, select 'Change Mobile
Number'. The relevant screen opens.
Enter the old mobile number and the new
mobile number and press 'submit'.

Select the District, Block, GP(Gram


Panchayat), Work type from the drop
down menu where the Point (GP Lit) is
to be captured. Then select the Work type
as GP Lit.
Click on Start Point button. There are
two modes in which the application can
be used. If there is no internet connection
available, use the Offline option. This is
selected by default. If there is internet
connection available, use the Online
option. Online mode may give better
accuracy.

ONLINE MODE

It goes to the next screen where the Lat


Long is captured. In Online mode, a map
zoomed in to the current location is
shown. The GPS location data of the
GPS locator service in the phone is used
to record the coordinates.
It may take some time to get the Lat
Long to stabilize. The accuracy of the
Lat Long captured is also shown on the
screen and this can be a guide for
deciding when to capture the Lat Long.
The next screen shows the captured Lat
Long and accuracy. You can enter a
remark for the point. Press the 'Take
Picture' button to take a picture of the
point of activity. Try to take a picture that
describes the point well. Press 'Save and
End. If there are more points to be
taken on the route, in case trenching,
ducting, laying then press 'Save and
Continue'
Even if there is no internet connection
the Online mode may work sometimes if
the map in that area has been accessed
previously.

OFFLINE MODE
In Offline mode, the data is stored in the
mobile phone and is uploaded
automatically when internet connection
is available. The data can also be
uploaded by going to the dashboard. The
data can be reviewed by selecting
Review in the options menu. Route or
Point activity data can be deleted by
going to the Dashboard.

You can exit the application by pressing


Exit. This will not logout the user and
you can continue your work by restarting
the application. But a route should be
saved and ended before exiting the
application.

If Lat Long shows Nil, check the location service of the phone. It should be turned on. If there is
a GPS location viewer application in the phone, check the Lat Long shown
by that application. GPS location viewer application may have an option to enable/ disable
location service and also an option to set the frequency for location lookup. Enable location
lookup and set login interval in the application appropriately.
Remember to stand at a point for some time, before capturing the Lat Long.

The following Users are created in the BBNL System:


Sl No

SSA/District

1
2

Kamrup
Kamrup Metro

3
4

Cachar
Dibrugarh

Supervisor
Username/password
supkamrup/Supkmr@1
supkamrupm/Supkmr@
1
supsilchar/Supsil@1
supdibrugarh/Supdbr@
1

Contractor
Username/password
conkamrup/Conkmr@1
conkamrupm/Conkmr@1
consilchar/Consil@1
condibrugarh/Condbr@1

You might also like