List of Equipment for B Tech Laboratory (Department of Electronics and Communication

Engineering)

Digital Signal Processing Laboratory:

1. Multifunctional signal measurement laboratory solution:

The solution should comprise the following items with specifications shown:
a) Oscilloscope :
i. Mixed Signal Oscilloscope capable of simultaneous viewing of at least 2
analog traces and 16 digital traces.
ii. Bandwidth :100MHz
iii. At least 2GSa sampling rate
iv. Inbuilt Math & FFT Capability.
v. Very fast waveform update rate of at least 100,000 waveforms per second.
vi. Connectivity : USB, LAN, GPIB

b) Function Generator :
i. Signals of choice upto at least 20 MHz.
ii. Modulation capability for generating AM, FM, PM etc.
iii. Custom, application-specific signals.
iv. 64K points of memory for custom waveform generation.
v. Free waveform editor for building waveforms using PSD waveform files
from MATLAB, add noise to signals and generate.
vi. Storage of waveforms in CSV format.

c) Power Supply :
i. Programmable outputs: 0 6V/0 5A and 0V - 25V/ 0A 1A.
ii. Resolution: 0.05mV and 0.1 A.
iii. Low noise and excellent regulation
iv. GPIB & RS232 connectivity
v. Low ripple.

d) Digital Multimeter :
i. For True RMS and at least 51/2 digits resolution.
ii. Measurements: DCV, DCI, True RMS ACV, ACI, Frequency, Capacitance,
Temperature, Diode & continuity.
iii. Connectivity: USB 2.0 interface & SCPI compatibility.

e) GPIB / USB Adaptor :

i. For connecting PC or Laptop to various Test instruments.

f) Electronics Instrument Trainer Kit :

i. Should have pre-written Labs & Procedures so that students get acquainted
with the features of various components / instruments.
ii. Should help students in understanding the fundamentals and governing
principles of basic instruments.

g) Multifunction Instrument Integration Software :

i. Capable of integrating various multifunction instruments through multiple
connectivity options like LAN, USB, RS-232 or VXI and easy programming
ii. Inbuilt MATHLAB scripts for processing & analysis, specially for
MATHLAB users.
iii. Predefined data structures and extensive driver compatibility for easy &
convenient program development.
 h) Vector Signal Analysis Software :
i. Should provide students to get exposure to the latest technology, wireless
protocols and standards (including WLAN , CDMA , WCDMA ,
GSM/GPRS/EDGE , Wimax etc.)
ii. Provide facility for analyzing complex modulation schemes like Digital
Modulations, I-Q modulations etc.
iii. Should have capability of capturing time domain signal through oscilloscope
and use it for getting frequency domain information and other parameters.

2. DSP setup on TI6000 Platform:

Specifications:
a) DSP Starter Kits with
USB compatibility
On board Memory
External Memory Interface
Device frequency 225 MHz
Expansion port connector for plug-in modules
In built high quality codec
Stereo cables of 3.5 mm jack
Embedded JTAG support via USB
On-board standard IEEE JTAG interface
Analog interface circuit for data conversion
I/O ports
b) Code Composer Studio (IDE) supporting all TI platforms.
c) Pluggable daughterboard with UART facility.
d) Interfacing kits for LED, LCD, Keyboard, Ultra fast ADC, DAC, Video Camera,
e) Finger Print Authentication, GSM Modem and Graphic LCD.
f) Laboratory Workbooks which should include tutorials for basic DSP Experiments,
g) Interfacing Experiments, and Image Processing Experiments

a) BNC cables
3. Upgradation of ORCAD design software from 5 user to 15 user

Microprocessor laboratory

1. Microprocessor 8085 kits :

Specifications:
(a) Built in assembler
(b) 4K Monitor FIRMWARE, 8K user 6264 (expandable upto 56K)
(c) Battery back up
(d) LCD display (40x2 lines)
(e) 46 parallel I/O, 8155/8255 PPI chip with 26 FRC bus.
(f) Serial I/O
(g) Computer keyboard compatible
Software:
Terminal emulation, Audio Cassette interface

2. Microprocessor 8086 kits:

Specifications:
(a) Built in assembler
(b) LCD display
(c) Computer keyboard compatible
(d) 8284 clock, 8288 bus controller, 64K RAM, 2x8255 PPI
3. 8051 Microcontroller kits
Features:
(a) ability to program 8051 microcontroller and its different variants 89C51, 89S51
etc.
(b) ability to program PIC series microcontroller 12 series, 16 series, 18 series, 24
series.
(c) ability to program different IC packages SOIC, SOP, PLCC, DIP etc with suitable
adapter.
(d) should include all software accessories and adapter for programming.

4. Interfacing kits for Microprocessors (8085 and 8086) :

(a) ADC-0809 Interface:
Uses 8 bit ADC-0809 with in- built 8 channel multiplexer. 8 LEDs are
provided to display the digital value of the input analog signal. The complete
operation of A/D converter chip can be understood using this card.
(b) Dual DAC Interface:
Consists of two independent 8 bit Digital to Analog Converter. The current
output of the DAC are converted to voltage using operational amplifiers.
(c) Stepper Motor Controller Interface:
Can control Stepper motor in three parameters such as direction, speed and
number of steps.
(d) Logic Controller Interface:
The logic controller interface provides the user with 8 TTL buffered
outputs and inputs. The logic state of each input and outputs is indicated by LED.
This module can be effectively used to teach 8255 input & output modes.
(e) LED Display Matrix card:
This card has a matrix of 8x8 LEDs and is a module to demonstrate for
displaying any character within the matrix.
(f) 373 Latch Study Card:
This study card helps to understand the working of Chip used for latching
the address. LEDs are provided for Data Bus to enable the user to know which
data is present on input/output.
(g) Traffic Controller card
(h) Hex keypad controller card
(i) 8155 study card

5. Interfacing kit for Microcontroller (8051):

Stepper Motor Controller Interface:
Should be able to control Stepper motor in three parameters such as direction,
speed and number of steps.

6. Personal Computers:
80 GB hard disk, 512 MB RAM, flat monitor, Intel Core Duo @2.00 GHz with
all other accessories

7. Figaro MOS sensors : TGS series

Digital Communication Laboratory:

1. Spread spectrum (CDMA/DSSS) setup for wireless communication with bit

error measurement
Specifications:
 a) Direct sequence modulator /demodulator
b) Chip rate not less than 10Mchip/s
c) Gold sequence, length sequence, barker code
d) BPSK/QPSK/OQPSK
e) Pseudo-random bit stream
f) Noise addition
g) Lab manual with details
2. Satellite communication setup
Specifications:
a) 3 channels uplink
b) 12200/-1300 MHz uplink
c) Wide band RF amplifier
d) RISC processor
e) FM modulation of audio/video
f) Dish antenna
g) Satellite link
h) Downlink receiver
i) Lab manual with details
3. Frequency hoping spread spectrum setup:
Specifications:
a) Frequency: 1 MHz 25 MHz
b) Nos of Channel: 4/5
c) Nos of PN sequences: 32
Laser Fiber optic trainer:
d) Laser source: 660nm
e) Mode: ACC & APC
f) Detector: PT,PD
g) Transmitter/Receiver
h) Plastic cable/glass cable
i) Power adapter
j) NA measurement
k) Power meter
Microwave Laboratory

Sl.No. ITEM/EQUIPMENT SPECIFICATIONS

1. Transreceiver trainer with RF Operating Frequency: 864.1 MHz to 868.1 MHz, Transmitted Power: Upto
Circuit Design Courseware 100 mW EIRP, Control Panel: Windows based Software, all necessary
accessories
2. Spectrum Analyzer (price Large High Resolution Display with output connector for external Monitor
combined with Transreceiver
One Button Measurement for Adjacent Channel Power, Occupied
trainer with RF Circuit Design
Bandwidth, Channel Power
Courseware)
Auto tuning feature to capture the highest level Signal
PC Interface with USB
Optional facility for built in Tracking Generator.
Provision for internal Preamplifier
Frequency range: 9 KHz to 3.0 GHz
Frequency reference aging: + / - 1*10-6 per year.
Set up resolution:1 Hz
Sweep time: 9.5 msec. to 4000 secs.
Resolution bandwidth: 10 Hz to 1 MHz
 Sl.No. ITEM/EQUIPMENT SPECIFICATIONS
Measuement range: +30 dbm. to - 128 dbm.
Amplitude Measurement Accuracy: +/- 0.3 db
Marker frequency counter resolution: 1Hz to1 KHz Selectable
Phase Noise at 10 KHz Offset: < - 85 dbc/Hz
17. RF signal generator It should be fully programmable
Transreceiver trainer with RF
Should be capable of generating AM , FM , PM outputs and the
Circuit Design Courseware)
Simultaneous modulations.
Should be capable of full Sweep with Varying the frequency and Amplitude in
Steps
Should have standard USB Connectivity for PC Interface and USB Drive
storage.
Frequency Range: CW Output - 9 KHz to 3 GHz, LF Output - 20 Hz To 80
KHz
CW Frequency Resolution: 0.1 Hz
Sweep Mode: Frequency LF - 20 Hz to 60 KHz and RF - 9 KHz to 3 GHz
Amplitude :127 to + 13 dbm
Time Base Aging rate: < +/- 1 ppm
Harmonics: better than 30 dbc / Hz at 1 GHz
Output Range: + 13 to - 127 dbm.
Output Amplitude resolution: 0.1 db
SSB Phase Noise: < - 95 dbc / Hz at 1 GHz
Frequency Modulation: Deviation upto 100 KHz
Phase Modulation: Peak Deviation 0 to 10 radians
Amplitude Modulation: Range 0 to 100 % , Resolution 0.1 %
Pulse Modulation: ON / OFF Ratio >= 40 db
Modulation Source: Internal and external.
Interface: USB
36. GENESYS RF Design and
Analysis Software
37. Vector Network Analyzer Frequency range: 300 kHz to 1.5 GHz
Number of ports: 2
Measurement channels: up to 4 independent measurement channels, with
each channel having a display window.
Dynamic range: 115 db. ( 300 kHz to 3 gHz )
Measurement parameters: S 11, S 21, S 12, S 22, with conversion to
reflection impedance, transmission impedance, reflection & transmission
admittance .
Display formats: Smith chart, polar, SWR, real, imaginary, phase, group
delay, magnitude ( log and linear ) etc. Display should have at least 5
independent markers per trace.
Data markers: Smith chart format should have marker formats like R + j X
and G + j B etc.
Sweep type: linear, segment, power and log sweep.
Trace math: vector addition, subtraction, multiplication or division of
measured complex values and memory data.
 Sl.No. ITEM/EQUIPMENT SPECIFICATIONS
Storage: Storage of Instrument States, Calibration Data & Trace Data on
internal Hard Disk Drive
47. Band Pass Waveguide Filter X-Band
(13 Section)
48. Broad Band Matched Coaxial X-Band Waveguide type
Detector Mount (fixed)
49. Broad Band Tuned Detector X-Band Waveguide type
Mount (WG)
50. Broad Band Tuned Probe X-Band Waveguide type
(Fixed)
51. Broad/Narrow Wall Slot
Antenna
52. Circular to Rectangular X-Band Waveguide type
Waveguide Transition
53. Coaxial cable RG-58/U with BNC(M) conn. On both ends (1 meter)
54. Coaxial cable RG-58/U with BNC (M) conn. On one end (1 meter)
55. Coaxial cable RG-58/U with BNC(M) conn. On one end UHF (M) conn. On other end (1
meter)
56. Coaxial cable RG-58/U with TNC (M) conn. On both ends (1 meter)
57. Coaxial cable RG-58/U with TNC(M) conn. On one end (1 meter)
58. Coaxial cable RG-8/U with N(M) conn. On both ends (1 meter)
59. Coaxial cable RG-8/U with N(M) conn. On one end (1 meter)
60. Coaxial N(F) to Waveguide X-Band Waveguide type
adapter
61. Coaxial SMA- M/F to X-Band Waveguide type
Waveguide Adapter
62. Coaxial Thermistor Mount 0.01 to 18.0 GHz (Agilent / HP Make)
63. Conical Antenna Gain: 15db
64. Conical Dielectric Antenna
65. Cooling Fan for Klystron / Gunn
66. Cross Directional Coupler 20 X-Band Waveguide type
db
67. Detector 1 N23 diode
68. Direct Reading Frequency X-Band Waveguide type
Meter
69. Waveguide Detector mount X-Band Waveguide type with flanges at both ends
Tunable with Detector
70. Ebonite (10mm)
71. Ebonite (20mm)
72. Ebonite (30mm)
73. E-H Tee (Magic Tee) X-Band Waveguide type
74. E-H Tuner X-Band Waveguide type
75. E-Plane Bend 90 degree X-Band Waveguide type
76. E-Plane Tee X-Band Waveguide type
77. Fixed Attenuator 3,6 and 10 db X-Band Waveguide type
78. Flanges Choke type in Brass (X-Band)
 Sl.No. ITEM/EQUIPMENT SPECIFICATIONS
79. Frequency Meter (Micrometer X-Band Waveguide type
type)
80. Gunn diodes 10 mw
81. Gunn Oscillator X-Band Waveguide type mount section with micrometer plunger
82. Gunn Power Supply, Digital
83. Helix Antenna
84. High Pass Filter (5 Section) X-Band Waveguide type
85. H-Plane Bend 90 degree X-Band Waveguide type
86. H-Plane Tee X-Band Waveguide type
87. Inductive or Capacitive window
88. Isolator / Circulator with X-Band Waveguide type
Termination
89. Klystron Mount
90. Klystron Tube 2K25 New
91. Lattice Structure of steel balls
(for diffraction study)
92. Liquid Dielectric Cell with 60 X-Band Waveguide type
MM Micrometer-plunger, temp.
control water jacket & E-Plane
Bend
93. Low Pass Filter (5 Section) X-Band Waveguide type
94. Matched E-H Tee X-Band Waveguide type
95. Matched Termination, Low X-Band Waveguide type
Power
96. Mechanical Turn Table for
Radiation Pettern
97. MIC Patch Antenna Single Element
98. MIC Patch Antenna Double Element
99. MIC Patch Antenna Four Element
100. MIC Patch Antenna Sixteen Element
101. Microprocessor Based Turn
Table with Comuter- Interface
102. Microwave Cavity (X-Band) X-Band Waveguide type
103. Microwave Faraday Rotation
Apparatus
104. Microwave Power Meter With
digital readout
105. Microwave Power
Sensor/Power Meter
106. Movable Short X-Band Waveguide type
107. Multihole Directional Coupler 3, X-Band Waveguide type
6, 10, 20 or 40 db
108. MW Signal Generator
109. Nylon (10 mm)
110. Nylon (20 mm)
111. Nylon (30 mm)
 Sl.No. ITEM/EQUIPMENT SPECIFICATIONS
112. Parabolic Antenna (25cm dia.)
with dipole-feed
113. Perspex (10mm)
114. Perspex (20mm)
115. Perspex (30mm)
116. Pick- Up Horn with Square
aperture
117. Pin Modulator X-Band Waveguide type
118. Power Line Stabilizer
119. Precision E-H Tuner with 40MM X-Band Waveguide type
Micrometer Plungers
120. Precision Movable Short with X-Band Waveguide type
40MM micrometer Plunger
121. Precision Rotary-vane X-Band Waveguide type
Attenuator 0-50db
122. Precision S.S. Tuner with X-Band Waveguide type
Micrometer & Vernier
123. Pyramidal Waveguide Horn Gain 16db
Antenna
124. Pyramidal Waveguide Horn Gain 22db
Antenna
125. Raw Waveguide in Brass rate per meter
126. Sectoral Horn E-Plane X-Band
127. Sectoral Horn H-Plane X-Band
128. Slide Screw Tuner X-Band Waveguide type
129. Slide Termination , Precision X-Band Waveguide type
130. Slotted Section with Probe X-Band Waveguide type
Carriage
131. Smith Chart (pad of 100 Pcs)
132. Solid dielectric cell i.e. 7.5 cm X-Band Waveguide type
long W.G. with fixed reflector
133. Solid State Klystron Power
Supply (With square & saw
Modulation), digital readout
134. Solid State VSWR Meter
135. Solid State VSWR Meter,
Deluxe Model
136. Teflon/PTEE (10mm)
137. Teflon/PTEE (20mm)
138. Teflon/PTEE (30mm)
139. Three Port Circulator (T or Y) X-Band Waveguide type
140. Tripod Stand for Horn Height: Adjustable 110 150 cms
Antenna
141. Tunable Probe X-Band Waveguide type
142. Variable Attenuator 0-20db X-Band Waveguide type
143. Waveguide Detector mount X-Band Waveguide type
Sl.No. ITEM/EQUIPMENT SPECIFICATIONS
Tunable with Detector
144. Waveguide Flanges Cover type in Brass
145. Waveguide Phase Shifter X-Band Waveguide type
Movable Flap type
146. Waveguide Rotary Joint (I-type) X-Band Waveguide type
147. Waveguide Shorting Slide X-Band Waveguide type
Switch
148. Waveguide Stand X-Band Waveguide type
149. Waveguide Switch, SPDT, X-Band Waveguide type
Rotary
150. Waveguide Twist , 90 degree X-Band Waveguide type
151. Waveguide with Flanges 5 cm long
152. Waveguide with Flanges 10.0 cm long
153. Waveguide with Flanges 15.0 cm long
154. Waveguide with Flanges 20.0 cm long
155. Waveguide with Flanges 30.0 cm long
156. Wax-Paraffin (10mm)
157. Wax-Paraffin (20mm)
158. Wax-Paraffin (30mm)
(Waveguide items are of rectangular type unless otherwise specified.)

Specifications for Rotary Evaporator & Syringe Pump

i. Rotary Evaporator :
Vertical version rotavapour
a. Evaporation flask size from 50 ml up to 5000 ml
b. Vacuum and tight seals made up of PTFE
c. The heating bath, for water or oil (20-1800 C)
d. Graphic display of actual temperature and the temperature setpoint.
e. Glass assembly for dry ice ( or water)
f. Digital controller of the evaporation flask rotation speed
g. Digital vacuum controller.
h. Microprocessor controlled digital set up of the maximum temp.
i. Automatic Lifting device.
j. Automatic power cut of in case of over heating and power failure.
k. Solvent library with specified solvents.
Diaphragm pump
a. Oil free.
b. Ultimate pressure < 2 mbar.
c. Operating voltage 100-240 V/50-60 Hz

ii. Syringe Pump

a. Single/ dual syringe pump
b. Microprocessor controlled.
c. Should be able to hold any size syringe from 10 l to 60 ml
d. Automatic volume control and shut off.
e. Continuous dispense volume display
SPECIFICATIONS FOR ARC WELDING MACHINE:

Specifications:
Primary voltage (volt) 380/415
Phase 1-3
Rating (KVA)
Continuous 7-30
Maximum 13-45
Open circuit voltage (volt) 50-100
Open arc voltage (volt) 20-45
Welding current range (ampere) 30-600
Welding electrode range (mm)
Minimum 1.5-2.5
Maximum 4-6
Cooling air

SPECIFICATIONS OF THE REQUIRED SIMULATION AND

MODELING SOFTWARE FOR NANOSCIENCE LABORATORY OF
THE DEPARTMENT OF PHYSICS:
Software to construct graphical models of molecules, crystalline materials,
and polymers; to manipulate, view , and analyze these models. It should
accept data in graphical, tabular and textual format, a wide range of
industry standard file formats. Software to construct homopolymers,
dendrimers, periodic systems based on lattice parameters, surfaces from
non-periodic structures, crystals, layered structures from either crystalline
or amorphous materials or combinations of both.
Software should be able to do, calculation tasks as total energies, forces,
and stresses, geometry optimizations, molecular dynamics, transition state
search , elastic constants, phonon frequencies. Software should allow
choice of local, gradient corrected and screened exchange functionals for
approximating exchange and correlation effects, job control options like
choice of parallelization strategy to optimize computational performance,
choose number of CPUs, specify server machine, monitor output and
status reports including text or graphs of energy and gradiet during
geometry optimization.
Software shouls give, optical properties, frequency dependent dielectric
function polarizability, reflectivity, refractive index,UV spectra, IR
spectra, static elastic constants, phonon dispersion, band structures, total
and projected phonon density of states, thermodynamic properties, real or
reciprocal space pseudopotential representation, charge , spin, and
deformation densities, 3-D contours and 2-D slices, Simulated scanning
tunneling microscopy (STM) images, overlay multiple plots and color
surfaces by property maps.
Software should be a quantum mechanics based program designed
specifically for calculations on large systems(> 300 atoms). It should
handle proteinligand complexes, grain boundaries, nanoclusters, surface
chemistry applications, large molecular systems nanotubes.
It should preferably be a linear scaling DFT code, where the time required
for a calculation increases linerly with the number of atoms.
 Software versions for single user and multiple user(4/6/8/12 user)
Software must run both on Linux and Windows platform. Licenses should
never expire. Annual maintenance has to be guaranteed.
SPECIFICATIONS OF LCD MULTIMEDIA PROJECTOR:
A. Brigtness: about 1500 ANSI lumen
Native Resolution : XGA(1024x 768)
Contrast Ratio: 400:1
Keystone Correction: Vertical + 250
Lens : Manual Zoom, Manual Focus, Manual Lens Shift.
Weight: Not more than 2.5 Kg.
PC compatibility: VGA, SVGA,XGA, SXGA.
Video Compatibility : NTSC, NTSC 4.43, PAL, PAL 60, PAL-M, PAL-N, SECAM
Terminals: 1 RGB input & 1 Monitor out , 1 Video input RCA, 1 S-video input DIN
4 pin, 1 PC control input.

B. Brigtness: about 2000 ANSI lumen

Native Resolution : XGA(1024x 768)
Contrast Ratio: 500:1
Keystone Correction: Vertical + 250, Horizontal +150
Lens : Manual Zoom, Manual Focus, Manual Lens Shift.
Weight: Not more than 5 Kg.
PC compatibility: VGA, SVGA,XGA, SXGA.
Video Compatibility : NTSC, NTSC 4.43, PAL, PAL 60, PAL-M, PAL-N, SECAM
Terminals: 1 RGB input & 1 Monitor out , 1 Video input RCA, 1 S-video input DIN
4 pin, 1 PC control input.

C. Brigtness: about 3000 ANSI lumen

Native Resolution : XGA(1024x 768)
Contrast Ratio: 600:1
Keystone Correction: Vertical + 350, Horizontal + 200
Lens : Manual Zoom, Manual Focus, Manual Lens Shift.
Weight: Not more than 6 Kg.
PC compatibility: VGA, SVGA,XGA, SXGA.
Video Compatibility : NTSC, NTSC 4.43, PAL, PAL 60, PAL-M, PAL-N, SECAM
HDTV (1080i, 720p, 480p, 480i)
Terminals: 1 RGB input & 1 Monitor out , 1 Video input RCA, 1 S-video input DIN
4 pin, 1 PC control input.

D. Brigtness: about 3500 ANSI lumen

Native Resolution : XGA(1024x 768)
Contrast Ratio: 600:1
Keystone Correction: Vertical + 350, Horizontal +200
Lens : Manual Zoom, Manual Focus, Manual Lens Shift.
Weight: Not more than 6 Kg.
PC compatibility: VGA, SVGA, XGA, SXGA.
Video Compatibility : NTSC, NTSC 4.43, PAL, PAL 60, PAL-M, PAL-N, SECAM
HDTV (1080i, 720p, 480p, 480i)
Terminals: 1 RGB input & 1 Monitor out , 1 Video input RCA, 1 S-video input DIN
4 pin, 1 PC control input.

Optional: The supplier should also quote for the following:

 1. Appropriate accessories, if the distance between the LCD display and computer
system is more than 10 ft. (3 meter) upto 75 ft. (25 metre)
2. Remote control facility.
3. Automatic control in lieu of manual control.
4. Unique chalk board facility for draw and write notes on a projected image.
5. wireless accessories & net connectivity.
6. IP enabling access over network.
7. Quality cabling to get the high performance picture. If the quality of the picture is not
to the expectation of the user the supplier has to replace the cable free of cost.
8. Details about after sales services.
9. Extended warranty for three years.
10. The supplier should indicate whether the system will be delivered with one bulb or
spare bulb , if any.
11. Type of lamp with details and life of lamp should be indicated.
12. Cost of extra lamps.
13. The supplier may quote in rupee and /or foreign currency terms.

GENERAL TERMS & CONDITIONS

1. No separate tender paper will be issued from the office; one should only download
the specifications from the web site.

2. The rates should be quoted against each item as shown in the list in the same
chronological order along with specifications and supporting documents (technical
details and brochures etc.).

3. Quotation for each department should be submitted in separate cover and the cover
should be legibly indicated the name of the department.

4. Quotations should be accompanied by-

i. A call deposit (earnest money) amounting to Rs. 5,000/- pledge in favour of
the Registrar, Tezpur University, payable at Tezpur.

5. The rates should be exclusive of taxes and applicable tax % should be clearly
indicated.

6. At least one year warranty for all equipment should be provided.

7. The University is exempted from Custom & Excise duty.

8. Terms and Conditions of supply and installation (if required) should be clearly
indicated in the quotations.

9. The supplier should be in a position to deliver and install the ordered items within the
stipulated time mentioned in the supply order.

10. Items must be delivered at Napaam campus of the University.

11. The rates should be valid at least for a period of one year.

12. The University reserves the right to accept or reject any or all the quotations without
assigning any reason.
13. Applications should be forwarded to the Registrar for release of call deposit against
unaccepted quotations.

(M. Ahom)
Registrar