Scribd
Upload
59 views

Offset Chart Chimney Installation

The document provides charts to assist in selecting the proper combination of elbow angle (15°, 30°, 45°) and chimney lengths needed to offset a chimney installation. The charts specify the offset distance ("A") and total height ("B") required for various chimney diameters and offset configurations using different elbow angles and chimney section lengths. Notes provide additional installation guidelines such as limiting offsets to one elbow pair and supporting chimney lengths between offsets.

Uploaded by

Mac Shaik
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
59 views

Offset Chart Chimney Installation

The document provides charts to assist in selecting the proper combination of elbow angle (15°, 30°, 45°) and chimney lengths needed to offset a chimney installation. The charts specify the offset distance ("A") and total height ("B") required for various chimney diameters and offset configurations using different elbow angles and chimney section lengths. Notes provide additional installation guidelines such as limiting offsets to one elbow pair and supporting chimney lengths between offsets.

Uploaded by

Mac Shaik
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

OFFSET CHART CHIMNEY INSTALLATION

It may be necessary to offset the chimney in order to clear a joist or an obstacle. The three (3) charts below will assist you in selecting
the proper combination of elbow angle and chimney length(s) that will provide the necessary degree of offset within an available height.

1. Select the column with the proper


15 OFFSET CHART
chimney diameter of your system. Chimney 5" Diameter 6" Diameter 7" Diameter 8" Diameter
Lengths A B A B A B A B
2. Determine the distance of the off-
none 15/16" 8-1/4" 15/16" 9-1/8" 15/16 8-13/16" 15/16" 8-5/8"
set required by dropping a plumb line
for an accurate measurement. The 6" 2-1/4" 12-7/8" 2-1/4" 13" 2-1/4" 13-7/16" 2-1/4" 13-3/16"
offset is measured at the chimney
centre line as per the "A" Offset 12" 3-3/4" 18-5/8" 3-3/4" 19-3/8" 3-3/4" 19-1/4" 3-3/4" 19"
measurement in the diagram below.
18" 5-1/4" 24-1/2" 5-1/4" 25-5/16" 5-1/4" 25" 5-1/4" 24-7/8"
3. On the chart, find the predeter- 24" 6-7/8 6-7/8 30-1/2" 6-7/8 30-3/8"
30-1/4 6-7/8 31-1/8"
mined distance (under the "A" col-
umn) required for the 15o elbow. For 12" + 18" 8-1/8" 34-7/8" 8-1/8" 35-3/4" 8-1/8" 35-7/16" 8-1/8" 35-3/16"
greater offset, use the 30o or 45o 36" 10" 41-7/8" 10" 42-5/8" 10" 42-3/8" 10" 42-1/8"
offset charts.
12" + 36" 12-3/4" 52-1/4" 12-3/4" 53-1/16" 12-3/4" 52-7/8" 12-3/4" 52-1/2"
4. After finding the offset, look at the
B (height) measurement in the chart 18" + 36" 14-3/8" 58-7/8" 14-3/8" 58-7/8" 14-3/8" 58-5/8" 14-3/8" 58-3/8"
to find the specified height. The 12"+18" 36" 17-1/4" 68-3/8" 17-1/4" 69-1/4" 13-1/2" 69" 13-1/2" 68-3/4"
appropiate "chimney lengths" re-
quired in between elbows is found in 48" 13-1/8 53-3/8 13-1/8" 54-1/4" 13-1/8 54" 13-1/8 53-3/4"
the left hand side column on the
chart.
30 OFFSET CHART
Offset
Chimney 5" Diameter 6" Diameter 7" Diameter 8" Diameter
A Lengths A B A B A B A B
none 3-1/2" 13-3/8" 3-1/2" 15-1/2" 4-1/8" 16" 4-1/8" 16"
6" 5-15/16" 17-1/2" 5-15/16" 19-1/2" 6-1/2" 20-1/8" 6-1/2" 20-5/8"
12" 8" 22-5/8" 8" 24-3/4" 9-1/2" 25-1/4" 9-1/2" 25-3/4"
18" 11-7/8" 27-7/8" 11-7/8" 30" 12-1/2" 30-1/2" 12-1/2" 31"
"B" 24" 14-7/8 33 14-7/8" 35-1/8" 15-1/2" 35-3/4" 15-1/2" 35-3/4"
Height
12" + 18" 20-1/4" 37-1/2" 20-1/4" 44-1/2" 20-7/8" 45" 20-7/8" 45-1/2"
36" 20-7/8" 43-1/2" 20-7/8" 45-1/2" 21-1/2" 46-1/8" 21-1/2" 46-5/8"
12" + 36" 26-3/8" 54-3/4" 26-3/8" 54-7/8 26-7/8" 55-3/8 26-7/8" 55-7/8
18" + 36" 29-1/4" 57-7/8" 29-1/4" 60-1/8" 29-3/4" 60-1/2" 29-3/4" 61-1/8"
12+18"+36" 32-1/4" 63-1/8" 32-1/4 65-3/8" 32-7/8" 65-7/8" 32-7/8" 66-1/4"

NOTE: 48" 37-3/4 72-1/2 37-3/4 74-5/8" 38-1/4" 75-1/8" 38-1/4" 75-5/8"
UltraTemp chimney can be
offsetted using 15o, 30o or 45o elbows. 45 OFFSET CHART
Combining offsets for a greater angle is
not permitted.
Chimney 5" Diameter 6" Diameter 7" Diameter 8" Diameter
One pair of (two) 15o, 30o or Lengths A B A B A B A B
45o elbows may be used per interior none 4-3/4 11-7/8 4-3/4" 11-7/8" 5-1/2" 14" 5-1/2" 15-1/8"
installation.
Never install an elbow in a joist 6" 8 15-3/8 8" 15-3/8" 8-7/8" 17-5/8" 8-7/8" 18-1/2"
area. Chimney sections must pass
vertically through framed joist areas. 12" 12-1/4 19-1/2 12-1/4" 19-5/8" 13-1/8" 21-5/8" 13-1/8" 22-3/4"
Each elbow support will sup- 18" 16-1/2 23-7/8 16-1/2" 23-7/8" 17-3/8" 25-7/8" 17-3/8" 27"
port 30 feet of chimney.
An intermediate support must 24" 20-7/8 28 20-7/8" 28 21-1/2" 30-1/8 21-1/2" 31-1/4
be used at 4 feet intervals in conjunction 12" + 18" 28-3/8 35-5/8 28-3/8" 35-5/8" 29-1/4" 37-3/4" 29-1/4" 38-7/8"
with an elbow support.
The maximum length of 36" 29-1/4 36-1/2 29-1/4" 36-1/2" 30" 38-1/2" 30" 39-5/8"
chimney allowed between elbows is 12" + 36" 36-7/8 44-1/8 36-7/8" 44-1/8" 37-3/4" 46-1/8" 37-3/4" 47-1/4"
16 feet.
18" + 36" 41-1/8 48-3/8 41-1/8" 48-1/2" 42-7/8" 50-1/2" 42-7/8" 51-1/2"

12"+18+36" 45-3/8 52-5/8 45-3/8" 52-5/8 46-1/8" 54-5/8" 46-1/8" 55-3/4"


All measurements in inches.
48" 37-1/2 45 37-1/2" 45" 38-1/2" 47" 38-1/2" 48-1/8"
Construction tolerances + one inch.

You might also like