This document contains forms for registering hazardous waste generation and treatment facilities with the Department of Environment and Natural Resources in the Philippines. Section A1 requests general information about the generator facility including contact details, business description, and financial information. Section A2 requires information on the types and volumes of hazardous wastes generated annually. Section A3 requests details on storage, transport, treatment and disposal of each hazardous waste stream including locations, volumes, identifiers for transporters/treaters/disposers, and methods. Section A4 is for facilities treating hazardous waste onsite and requests information on treatment methods, capacities, and permits.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
1K views6 pages
Application HWID
This document contains forms for registering hazardous waste generation and treatment facilities with the Department of Environment and Natural Resources in the Philippines. Section A1 requests general information about the generator facility including contact details, business description, and financial information. Section A2 requires information on the types and volumes of hazardous wastes generated annually. Section A3 requests details on storage, transport, treatment and disposal of each hazardous waste stream including locations, volumes, identifiers for transporters/treaters/disposers, and methods. Section A4 is for facilities treating hazardous waste onsite and requests information on treatment methods, capacities, and permits.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 6
DENR Hazardous Waste Registration
Form A : Registration form for HW Generator
Section A1. General Information of Generator 1. DENR *1 2. Date of issued (D/M/Y): / / *1 ID: 3. Name of Firm: 4. Plant Address: 5.Date of Establishment: 6. Tel: 7.Fax: 8. Office Address: 9. Tel: 10.Fax: 10. Pollution Control Officer: 11. Tel: 12. 13. e-mail: 14. General Description of Business/Operation Philippine Standard Industrial Classifications 15. Primary: 16. Secondary: 16. Major Products: 1. 4. 2. 5. 3. 6. 17. Authorized Capitalization (Pesos/year) 18. Paid-up Capitalization (Pesos/year) 19. Approximate Annual Turn-over (Pesos/year) 20. 21. 22.
Please append the following:
(1) Process flow diagram all waste streams (2) Mass balance of manufacturing process (3) Description of existing waste management plan (4) Analysis of waste(s) (5) Other relevant information e.g. planned changes in production processes or output, comparison with related operations. (6) Copy of Environmental Compliance Certificate (ECC) (7) Copy of Valid Permits to Operate Pollution Control Facilities (8) If on-site treatment is present, submit the A4 form for every TSD facility. I certify that the enclosed information is a true and accurate record as available.
Pollution Control Officer:
DENR Hazardous Waste Registration
Signature: Date (D/M/Y): / /
*1: to be filled up by EMB * This form must be submitted in triplicate copies and duly notarized. DENR Hazardous Waste Registration 3/4
Section A2. Waste Generation Per Year by Type of Waste (Approximately)
HW Nature: Lq = Liquid, So = Solid, Sl = Sludge, Ga = Gases
DENR Hazardous Waste Registration 4/4
Section A3. Waste Storage, Transport, Treatment and Disposal
1. HW No. 2. TSD 3. Volume 4. Storage Transporter Treater Disposal Location*1 (ton/year) Method*2 5. ID No. 6. Name 7. ID No. 8. Name 9. Method 10. ID No. 11. Name 12. Method DENR Hazardous Waste Registration 5/4
*1 TSD Location: On-site or Off-site
*2 Storage Method: D DENR Hazardous Waste Registration
A4. Information of HW Treatment Premises
1. DENR ID: 2. Date of issued (D/M/Y): / / 3. Name of Firm: 4. Address of TSD: 5. Treatment method and Capacity: A: Physico-Chemical treatment B: Thermal treatment C: Solidification D: Storage E: Disposal F: Recycle Method Date of permit to Treatment Capacity Type of HW can be treated operate (ton/day) / / / / / / / / / / Please append the following: (1) Copy of Environmental Compliance Certificate (ECC) (2) Copy of Valid Permit to Operate pollution control facilities (3) Initial Environmental Examination (IEE) or Environmental Impact Statement (EIS) submitted to the EMB Regional offices (4) Process flow Diagram and detailed description of each treatment/recycling process identifying all/by-products, end-products and residues (5) Pollution control officer accreditation certificate (6) Storage management plan for raw materials, residues, by-products and end-products (7) Photograph/s of the facilities showing processing areas, storage areas