Advanced Technology, High Performance www.kondas.net www.kondas.com.tr Low Voltage Capacitor Banks Cataloguea rie) KONDAS CAPACITOR was founded in 1974 as the first capacitor producer of Turkey. It has developed its technology and product range for 38 years, and has maintained its characteristics as the largest capacitor producer of Turkey. KONDAS has manpower formed of more than one hundred experienced engineers and skilful workers who believed in customer satisfaction. Basic policy in KONDAS CAPACITOR has been deter- mined as customer satisfaction at highest level. Followings are in the product portfolio of KONDAS that are fully environment friendly; Shunt, Serial, Surge, impulse test Capacitors for High and Medium Voltage systems (0G type) Water cooled and Air cooled Induction Furnace Capacitors. Water cooled and Air cooled DC, DC Snubber, DC Link capacitors. Power Capacitors for Low Voltage systems (ZnPP - ZnPS - ZnPAS - AsVArtor series) (AG type) Reactive Power Relays (VArKON 24) Compensation Contactors with Thyristor. (VArKON) Harmonic Filter, Shunt, Current Limiting Reactors for Medium and Low Voltage systems (VArKON) Compansation Banks for Medium Voltage systems (VArPOWER) ‘Automatic Power Factor Compensation Panels for Medium and Low Voltage (VArPOWER series) Protection control panels. (VArPOWER) Projecting and turnkey installation of Medium and Low Votage Compensation systems. KONDAS CAPACITOR where Total Quality Management System Standards are applied has TS-ISO-EN 9001- 2008 quality management, ISO 14001-2004, OHSAS 18001-2007 standards and CE Certificates as well as the test documents that belong to product standards and TSE Certificates. Those systems have been defined in the Manuals. VArKON Power Factor conection @&S @ + asa Eh = oe EmAG Type Low Voltage Power Capacitors ZnPS TECHNICAL SPECIFICATIONS: Operating Temperature Range: -25/D (-25 / +55 °C) Capacitance Tolerance: -5 +10 % Working Voltages (Un): 400 V (others as shown table 3) Working Frequency: 50 Hz (upon request GOH) Internal connection: Delta Permitted Over Voltages: As shown tables 2 Permitted Over Current: 1,3 In lnvush current >100 In Terminals: on terminal board, cable connectable terminals ‘Terminals Torque: 3 N.m Dielectric Losses (Tand -dissipation fact.): <0.2 W/KVAr Total Losses (Tan dissipation fact.): <0.5 W/KVAr Safety device: Internal overpressure disconnector Protection Class: 1P20 Test Voltage Between Terminals: 2,16 Un AC, 2.sec Test Voltage Between Terminals and Case: 3 KV AC, 10 sec Fixing stud: M12 (max.torque 10 Nm) ‘ite: 2000 m, 2.8 Discharge Resistor: External . 75 Vafter 180 sec. Reference Standards: Capacitors meet or exceed of IEC publication 60831-1/2; TS EN 60831-1 KONDAS Quality Assurance Standards: TS EN ISO 9001- 2008, Our quality system is described in KONDAS Quality Manual elle LONG LIFE: KONDAS ZnPS Capacitors are described as “self healing”. This means that they are capable of restoring. After ocourring short circuit between the electrodes, the metal layers around the short circult are vaporized and short circuit is terminated. Due to the that fact; KONDAS CAPACITORS are long lasting, DESCIRIPTION OF THE ZnPS TYPE CAPACITORS: The dielectric is low loss polypropylene film and the electrodes are consist ofa very thinmetal coating on one side of the PP film layer coated under vacuum conditions. Two layer of metallized PP are wound into cylindrical windings. The windings are named as the Capacitor Elements. After metal spray application of both sides of the windings, the wire connections are provided. Those single phase capacitor elements are dehydrated under high vacuum conditions, impregnated with highly purified gas. The Capaci- tor Elements are encapsulated in polyurethane resin which is non toxic, environment compatible and having a high class insula- tion and mounted in aluminum tube. They are internally connected in delta postion to give the required three phase output. CONSTRUCTIONS: ZnPS Capacitors are consist of self-healing metallized polypropylene film, plastic core, polyurethane resin, insulation materials, ‘mechanical fuses (disconnector), aluminium can and terminal block. All capacitors are equipped with discharge resistor on touch proof terminals and protection degree is IP20 APPLICATIONS: ZnPS type capacitors have been designed for easy and quick assembly in banks. These are modular capacitors are used in auto- ‘matic or manual power factor correction panels for low voltage applications. PRODUCTION RANGE: Other than products for different values of voltage, frequency, capacity and temperature those stated in the table 1 are also in- ‘cluded in our production line. NON POLLUTING: All the materials used on KONDAS CAPACITORS are non-toxic and completely environmentally compatible. DIMENSIONS: ZnPS Capacitors have standard dimensions. You can find dimensions and other details in the tables 5-10TEMP. CATECORIES AG Type Low Voltage Power Capacitors "AMBIENT AIR ‘PERMITED OVER VOLTAGE ‘MEANING HIGHEST MEAN OVER [ANY PERIOD OF (C*) 2a hour year ‘pormansnit over wollago 25 = 240°C ‘8 hour/day “25 = 445°C ‘30 min /day 25 = +50°C Simin /200 umes 35 — 355°C ‘st and 2nd Diait MONOPHASE / 230 V, 50 Hz ‘CAPACITANCE | BaD ‘36.7 3x10. 36.7 350 ‘CAPACITANCE | aan 3x8.2 39.3 x15. 330.9 36.3 oe "WORKING VOLTAGEAG Type Low Voltage Power Capacitors STANDARD RATINGS] DIMENSION] WEIGHT | __ PACKAGES | TYPE [Power] CAPACITANCE cunnewr| DIAM. |HEIGHT| KG | QTY |WEIGHT| PACK DIM. um _| mom) va | os | sare 6 | 95 a ae S1OKIBO vt 355 | 95 2 2351310480] vt 3a 65 | 110 2 23513103180 | 313.7 5 | 172 2 23513103240 | 3075 5 | 172 2 23513103240 | —3.a2 | 210 | os | 6 17012503280 vit | 10 | 3454.9 70_| 210 6 "17042503280 wi [425 | 368.6 70_|_247 6 180:2653280 yi | a5 | s23 75_| 247 | “6 1801265x310]| vit [20 | 3x40 2a7 6 18012653310 | vit | 25 | aas7.1_| 328 | 400 | 247 4 2161215x310| wa [30 | axt645 | 30.4 | 100 | 247 4 21512153310] SIE mg ‘STANDARD RATINGS PACKAGES TVPE | Powen| CAPACITANCE ‘ry [WEIGHT] PACK DIM, Taas—— “iz | 65 _[285s101280 | 34.6 12 | 65 | 2351080 x 36.9 a2 | 65 | 235.3i0xi80) yea [25 | sai6 22 [95 [235310240 Ya [5 323 22 | 95 | 235x3100240) yma [75 | 366 6 | 65 |170x2503280 ywa | 40 [346.1 6 | 65 _|170%250.280 | vwa [425 | 3575 6 | 7 |180.265x280 yea | i5 | x691 6] 41 | 1802653310 Ywa [20 | 31022 6 | 413, |is0265310| yma | 25 | 315.2 4 | 9 |21s215.310 30-| 3438.3 4 215:0153310| ‘STANDARD RATINGS DIMENSION | WEIGHT RAGES TYPE [PoweR] CAPACITANCE [cunnenr| DIAM [HEIGHT] KG | QTY PACK DIM, om_| rom(*) vor}os | sass] os [es | 95 [os [am 73531 0x30 | yor | 4. 33.9 ai [es | 95 | 04 | 22 2351310x480 | [yor fas | ss8 ar | 65 | a0 [oa [a2 2351310x180 oil 25 | 307 28 [es | 172 | 07 | a 23513103240 | vor} 5 | sass] 55 | 65 | 172 | o7 | 23513103240 | yor} 75 | sas0 | 83 | 65 | 210 | 09 | 6 | '170%250x280 | Yor | 10 | saae | 11 | 70 | 210 [os | 6 1701250x280 yor }125| saa2 | 138 | 70 | 247 | 4 | 6 180,265%310 | yor} 15 | ss7s | 165 | 75 | 287 | a6 [6 180%265x310 yor | 20-|~axrza | 22 | es | par [a8 6 | 413 | 48012653310] Yor | 25 | 363 | 275 [100 | 247 | 2 | 4 | 9 |2iseisxsi0, yor | 30 | axais | 33 | 400 | par [22 [4 | 92 |215:215x310| 40 22 [4 you 3x154i [44 | 100. 9.3 1215x215x350) (*)- For total height with terminal block; add 37 mm (*)- For total height with terminal block and M12 stud; add 84 mmAG Type Low Voltage Power Capacito: TECHNICAL SPECIFICATIONS: Rated Output: As shown tables 5-11 Operating Temperature Range: -25/D (25 / +55°C) Capacitance Tolerance: -5 +10 % Working Voltages (Un): 400 V (others as shown table 3) Working Frequency: 50 Hz Internal Connections: Delta or single-phase Installation: Indoor Permitted Over Voltages: As shown tables 2 Permitted Over Current: 1,3 In Infush Current: >400 In Dielectric Losses (Tand -dissipation fact): <0.2 W/KVAr ‘Total Losses (Tand -dissipation fact): <0.5 W/KVAr Terminals: M& Nuts of Terminals max. torque is § Num Protection Class: |P20 Test Voltage Between Terminals: 2,15 Un AC, 2 sec ‘Test Voltage Between Terminals and Case: 3 KV AC, 10 sec Altitude: 2000 m. a.s.. Discharge Resistor: Internal. 75 V after 180 sec. Reference Standards: Capacitors meet or exceed of IEC publication 60831-1/2; TS EN 608311 KONDAS Quality Assurance Standards: TS EN ISO 9001- 2008, Our quality system is described in KONDAS Quality Manual LONG LIFE: KONDAS ZnPP Capacitors are described as “selfhealing”. This means that they are capable of restoring, After occurring short citcuft between the electrodes, the metal layers around the short circuft are vaporized and short cifcuit is terminated. Due to the that fact: KONDAS CAPACITORS are long lasting, CONSTRUCTIONS: ZnPP Capacitors are consist of Self - Healing metallized polypropylene film, plastic core, polyurethane resin, plastic can, sheet steel box, plastic terminal cover for protection degree IP20 and plastic montage elements. All capacitors are equipped on inside With discharge resistor. DESCIRIPTION OF THE ZnPP TYPE CAPACITORS: The dielectric is low loss polypropylene film and the electrodes are consist of a very thin metal coating on one side of the PP film layer coated under vacuum conditions. Two layer of metallized PP are wound into cylindrical windings. The windings are named as the Capacitor Elements. After metal spray application of both sides of the windings, the wire connections are provided. Those single phase capacitor elements are denydrated under high vacuum conditions, impregnated with highly purified gas, The Capacitor Elements are encapsulated in polyurethane resin which is non toxic, environment compatible and having a high class insulation and mounted sheet steel case. They are internally connected in delta (**) position to give the required three phase output. APPLICATIONS: ZnPP type capacitors have been designed for easy and quick assembly in banks. These are modular capacitors are used in auto- ‘matic or manual power factor correction panels for low voltage applications. PRODUCTION RANGE: ther than products for different values of voltage, frequency, capacity and temperature those stated in the table 1 are also included in our production line GERI KATEDORT NON POLLUTING: 1 iA GERI |Allthe materials used on KONDAS CAPACITORS are non-toxic and completely ey environmentally compatible. DIMENSIONS: ZnPP Capacitors have standard dimensions. You can find dimensions and other details inthe tables 5-11 wa (**)-690V unit internaly connected In star 2 3500 TEMP. CATEGORIES: “ANBIENT ATR PERMITTED OVER VOLTAGE ‘SYMBOL | MEANING | MAX. | HIGHEST MEAN OVER ‘CONDITION ‘WORKING VOLTAGE [ANY PERIOD OF v FREQUENCY CAT. Zanou | tvoar | | permanent over vohage TOs Un 3rd | WORKING De | = VaOC| 4D | 30 20. ' hou/day 4.1.Un FREQ. 25a _|-25-+as-c | as | 35 25 30min day Lis un He ~25/e_[-25~*50°c | 50] 40 ED 5 min /200 tines 4,2 Un 25/0 | 25-4550] 55 | Ab 35 iii 430AG Type Low Voltage Power Capacitors "STANDARD RATINGS ‘CAPACITANCE Diba 4x30 1x602 1x903) 1x 150.5 “STANDARD RATINGS POWER] CAPACITANCE | KVAR 05, (8X20) 2X (3X 133.3) 2X (3X 166.7) mas 3x62 3x92 3x154 ‘3X308 3x46 Bx6i6 3X7? 3x925, 3X123.3 | 3X 154.1 3X 185 BR (3x 1233), 2X (3X 154.4) alolwlooclaloolesisses iecsare ysAG Type Low Voltage Power Capacitors isissisaias| | 2x3 x108.7) 2x3xas7.1) isis Lajelolaalalaaahseisel 3 FPe [rower] caracrance|aamanr] & | @ | © an war a5 = z 1 2 a5 2 2s 3 2 * a fas s 2 6 [5 6 is 5 [its 6 36 a5 [5 6 es [as a a5 [175] 295 3 355 [178 [198 3 syTele ary] te ka mlz ata a2] a2 Byes a5 fs 6 [oa 5 [15 ejay 85 6 | 129 5 | 8 [2 “96 [435 8 [an 5 [15 ‘6 | 189] 5-5 of i93| a5 [95 3 | 203] 375 [399] 7 [38 speloleyey we lanl w Ke. Too aso os to [iso 480] eT 72 70-| 190] 45007 [21-6 70 [is0 [aso] oa [2] 3 70-| #90] 245 | a [ 42 98 a [aus] 78 [210] 220] a6 [6 | oa a5_[ais | 75 [210 20286 [ai a [ats | 78 [210 220] 2 [6 [222] 35 | 115] 75-|2s0] 205] 2 [8 [sza| a5 | 125] 75 [210 265 ean 5 230 | 265 6 75 210 | 285 axiexs6ra) 175 3:0, 908(Gas Impregnated-Flame Damped ) AG Type Low Voltage Power Capacitors ZnPAS TECHNICAL SPECIFICATIONS: Operating Temperature Range: -25/0 (-25 / +55 °C) Capacitance Tolerance: 5 +10 % Working Voltages (Un): 415 V (others as shown table 3) Working Frequency: 50 Kz Internal connection: : Delta or single phase Installation: Indoor or Outdoor Permitted Over Voltages: As shown tables 2 Permitted Over Current: 1,3 In Inrush Current: >400 In Dielectric Losses (Tand -dissipation fact): fea few fe» [oa Jew o> owPower Factor Control Relay VArKON Power Factor Correction ‘SPECIFICATIONS: ‘Advanced Power Analizer |, PF, VA, W, Var, EVA, EW, BVAr, °C. Harmonic spectrum of current / voltage for each-phase (1-17H) THDV%, THD for each-phase ‘Neutral current, demanded current and voltage unbalance Current and voltage forms for eact-phase PFC Controller Functions ‘Automatic connection corrector Output for Thyristor Output for Contactor ‘Controll-port for Thyristor Controlled Reactor (TCR) Outputs can meet; Three-phase, Two-phase, Single-phase capacitor ‘and/or shunt reactor connection Displaying the step configuration ‘Automatic identifying for configuration PFC capability for ¢ lagging and/or + leading User friendly menu architecture and easy use operator panel ‘Adjustible reaction time for PFC calculation between 20ms to min Internal power supply as 24VDC Provision for external power supply connecting as 24VDC or 230VAC Provision to be connected to »/5A, x/1A CT or 100A directly Wide protection specialities ‘Advanced self test functions further more many reformist and unique specialities, APPLICATIONS: ‘The Type VARKON 24 PFC Controller which is DSP base designed and used for nearly all of the PF compensation methods, and offers exact solutions for using on unbalanced and/or rapid changed loads with their advanced power analyzer specialities. PFC controller has three ports, each port has 8 outputs, totally makes 24 digital outputs: For thyristor switching applications - 24 steps thyristor outputs For contactor switching applications ~ 24 steps thyristor outputs For hybrit applications; 8 steps for thyristors and 16 steps for contactors. Ithas one serial port for TCR application. a oa Messing process 100, 00.690 VAC | Reaetion curation [20 ms to mim (austabe) HvAA w/SAcréreeti05A mai) |oieta output [24 vanstor + R232 ozs [snes 16 wansstr = S232 frequency fore [supry |230,vA6 eet out Jee iowa riers 24 VOC or 230 VAC eel Jrotecton [Over Funder vgs [230 VAC external ts) [Over curent Det ajutment Por fon:0 9006 et 0036), STH Port Boon Temperate esot0.0sn) & Joicat output [pace programmable | Meth of contr |PFtrgeis (ce U~ con 3) piss. progammabie [aut excas ence oar ste mosbus ATU Power contol and target of reseve poner Pr (once) Jcorection ot fatomatic Ropearant poner iphase/iealloonnectons L Rete power (prase/tota) —|Montarng [Posen of he saps Reactive power iphase/tot) [steps configuration ph [thing quantiy Voltage (phase-neutral) she shes Senn a aiarenat Herr orp 01 [Demsndentcanent Ire enpere [0% 70° == Wor lfamsnc pac (|r Ft 58 Pe THOVer€ THOI (phase) |connecton [By moans ofthe tension damp os Notoge or eurent sina tne lemnats stows 05 029mm? 28 (phase) Weight lake i arco enone fies tom lcase material [tet Protection nes _|frone S47 ReaciPALStatic Contactors For Compensation eon VarKon static contactors are designed as switching device of the steps of automatic LV reactive compensation systems which are used where the reactive power changes very frequently and/or in the places where there are some voltage and current wavings. Varkon static contactor works on compensation system when the voltage comes “zero crossing” by means of it's control module based on MicroPro- cessor, therefore it prevents. some wavings on their system. For that reason some sensitive appliances like PC, CNC or PLC’s are not influanced too much and they work properly. Varkon offers effective solutions for reactive compensation to loads where a rapid change of reactive power requirements can be seen, especially in the industrial areas which have ‘spot weldings, cranes and/or arc furnaces. As VarKon’s switching ability Is shorter than 20ms, it has a big advantage and makes it succesfull against the conventional compensation system switches used on the same loads which are insufficiant. ADVANTAGES: ‘Static contactors have advantages against the electromechanical Contactors as below: Works more effective on the loads which have rapid changing on reactive power. Voltage “zero crossing” point offers minimizing the problems caused from the transients. Reaction time is very short (<20 ms) Works silently. Without any on-off switching quantity limit. Long tite Long life for the switched components (capacitor, reactor) Meets for all PLC and/or PC TYPE OF THE STATIC SWITCHES AND THEIR APPLICATIONS: ‘3P2 (3 phase with 2 thyristors) Itcan be used on delta connected capacitor switching, works with single control signal. ‘3P3 (3 phase with 3 thyristors) Itcan be used on three-pnase and with 6 terminals capacitor switching, works with single control signal. ‘SPR (3 phase with 3 thyristors) Itcan be used on three-phase shunt reactors switching, works with single control signal SP3CR (3 phase with 3 thyristors) Itcan be used on thyristor controlled shunt reactor, works with angular control signal. a | einiet of of of of af Pe | as tt gentle 3P2 4P3-3P3 3P3.R 3P3.CRStatic Contactor Types and Dimensions EN mn [FRONT VIEW [ps0 [FRONT View e [ sPaz0 j| 3P2a0 [FRONT view 8 = SIDE VIEW SIDE VIEW i (se ew aha 8 H | tes = [Lapazo ipa) (aPaa0 J aPza0 J ———e TOP VIEW a) (iesan_|[ 3300 | (3P2.1 (FRONT VIEW| [SBE VIEW) [Top view)Compensation Panels YarrOweR| Power Quality System| ual Sytem © LV POWER FACTOR COMPENSATION (PFC) PANELS WITH / WITHOUT FILTERS, @ LV PFC PANELS WITH STATIC SWITCHING (RAPID STEPS) @ LV PFC MODULES (RACK) LV PFC PANELS, CLASSICAL DESIGN @ LV PFC PANELS WITH DRAWERS: LV PFC 800 KVAr & harmonic fiter wit static switching LVPFC 260 KVAr & harmonic filter with static switching LV PFC 1.150V,900 KVAr & 14% harmonic fiter for induction heating furnace LVPFC830V,160 KVAr & 14% harmonic filter for PLEASE ASK A NEW PROJECT FROM OUR TECHNICAL TEAM, induction heating fumsce ‘TAILORED ACCORDING TO YOUR NEEDS AND REQUIREMENTSCumhuriyet Mh. istanbul Cd. No:11 Gebze/KOCAELI- TURKIYE Phone: 0262 744 10 75 / Fax: 0262 7441879 Cnn tne 22 6129896