AL MUQARRAM

INSULATION MATERIAL INDUSTRY L.L.C.

MATERIAL SAFETY DATA SHEET

DOLPHIN BITUMINOUS WATERPROOFING

Prepared on : 31-10-2015 Product Name : Dolphin Bituminous Waterproofing

Revision : 00 Product Code : Dolphin Bituminous Waterproofing
Page :1

1. Material Name and Company Data

Material Name / Product Name : Dolphin Bituminous Waterproofing

Product Description : One-component water-based protective and elastic waterproof
coating.
Company Name : Al Muqarram Insulation Material Industry L.L.C.
Address : 15th Industrial Area,
Post Box No. 24756
Sharjah, United Arab Emirates
Phone Number : +971 (6) 5353796
Fax No. : +971 (6) 5353964
E-mail ID : [email protected]

2. Composition / Data on Ingredients

Chemical Name CAS Number Proportion

Titanium dioxide 13463-67-7 10 30%
Calcium carbonate 471-34-1 10 30%
White spirit 8052-41-3 < 10%
2,2,4-trimethyl-1,3-pentanediol monoisobutyrate 25265-77-4 < 10%
Isothiazolines < 10%
Ammonium hydroxide 1336-21-6 < 10%
Additives < 10%
May contain residuals of styrene 100-42-5
Non-hazardous ingredients to 100%

Made in U.A.E
Al-Muqarram Insulation Materials Industry L.L.C.
P.O.Box: 24756, Sharjah. U.A.E
Phone: + 971 6 5353796, Fax: + 971 6 5353964
Mail: [email protected], [email protected]
Website: www.muqarram.com
 AL MUQARRAM
INSULATION MATERIAL INDUSTRY L.L.C.
MATERIAL SAFETY DATA SHEET

DOLPHIN BITUMINOUS WATERPROOFING

Prepared on : 31-10-2015 Product Name : Dolphin Bituminous Waterproofing

Revision : 00 Product Code : Dolphin Bituminous Waterproofing
Page :2

3. Hazard Identification
Hazard classification : Hazardous according to criteria of NOHSC
Risk phrase(s) : R 33 - Danger of cumulative effects.*
R 52 - Harmful to aquatic organisms.
* (limited evidence)

Safety phrase(s) : S 23 - Do not breathe gas/fumes/vapour/spray.

S 24 - Avoid contact with skin.
S 26 - In case of contact with eyes, rinse with plenty of water
and contact doctor or Poisons Information centre.
S 35 - This material and its container must be disposed of in
a safe way.
S 39 - Wear eye/face protection.
S 40 - To clean the floor and all objects contaminated by this
material, use water.
S 57 - Use appropriate container to avoid environment
contamination.
S 61 - Avoid release to the environment. Refer to special
instructions/Safety data sheets.
4. First Aid Measures
INHALATION : Remove from contaminated area. Lay patient down. Keep warm and
rested. Prostheses such as false teeth, which may block airway,
should be removed, where possible, prior to initiating first aid
procedures. Apply artificial respiration if not breathing, preferably
with a demand valve resuscitator, bag valve mask device, or pocket
mask as trained. Perform CPR if necessary. Transport to hospital or
doctor.
EYE CONTACT : While holding eyes open, gently flood with plenty of fresh water for
15 minutes. If irritation persists or recurs, seek medical attention.
Removal of contact lenses after an eye injury should only be
undertaken by skilled personnel.
SKIN CONTACT : Immediately remove all contaminated clothing, including footwear.
Wash contacted area thoroughly with soap and plenty of water. Seek
medical attention in event of irritation.
INGESTION : Immediately give a glass of water. First aid is generally not required.
If in doubt seek medical advice.

Made in U.A.E
Al-Muqarram Insulation Materials Industry L.L.C.
P.O.Box: 24756, Sharjah. U.A.E
Phone: + 971 6 5353796, Fax: + 971 6 5353964
Mail: [email protected], [email protected]
Website: www.muqarram.com
 AL MUQARRAM
INSULATION MATERIAL INDUSTRY L.L.C.
MATERIAL SAFETY DATA SHEET

DOLPHIN BITUMINOUS WATERPROOFING

Prepared on : 31-10-2015 Product Name : Dolphin Bituminous Waterproofing

Revision : 00 Product Code : Dolphin Bituminous Waterproofing
Page :3

5. Accidental Release Measures

Precautions for clean-up crew : Nitrile rubber or PVC gauntlets

Clean up spills / leaks : Prevent spillage from entering drains or
waterways. Contain spill with sand, earth or
vermiculite. Collect recoverable product into
labelled containers for recycling. Absorb
remaining product with sand, earth or vermiculite
and place in appropriate containers for disposal.
Keep spills and cleaning runoffs out of municipal
sewers and waterways. If contamination of drains
or waterways occurs, advise emergency services.

6. Firefighting Measures

Suitable extinguishing media : There is no restriction on type of extinguisher used.

Use extinguishing media suitable for surrounding
area.
Hazards from combustion products : Decomposes on heating and may produce toxic
fumes of carbon monoxide. May emit acrid smoke.
Precautions and equipment for fire fighters : Wear self-contained breathing apparatus
and full protective gear.
Hazchem Code : None allocated

7. Handling and Storage

Conditions for safe storage:

Location : Store in a cool, dry, well-ventilated area.
Temperature conditions : 5 to 35C.
Protection from weather : Do not allow to freeze.
Storage incompatibilities : Strong oxidising agents, acids and alkalis.

Made in U.A.E
Al-Muqarram Insulation Materials Industry L.L.C.
P.O.Box: 24756, Sharjah. U.A.E
Phone: + 971 6 5353796, Fax: + 971 6 5353964
Mail: [email protected], [email protected]
Website: www.muqarram.com
 AL MUQARRAM
INSULATION MATERIAL INDUSTRY L.L.C.
MATERIAL SAFETY DATA SHEET

DOLPHIN BITUMINOUS WATERPROOFING

Prepared on : 31-10-2015 Product Name : Dolphin Bituminous Waterproofing

Revision : 00 Product Code : Dolphin Bituminous Waterproofing
Page :4

8. Controls / Personal Protection

Exposure standards : Not available for Barracryl Elastic

Engineering controls : Natural ventilation should be adequate under
normal use conditions. Keep containers closed
when not in use.
Respirator type (AS/NZS 1716) : Type P1 if sprayed or ventilation inadequate.
Glove type (AS2161) : Nitrile rubber or PVC gauntlets
Eye protection : Chemical workers goggles.
Clothing : Overalls
Other : Use barrier creams to protect skin from contact
with the material. Wash hands before smoking,
eating, drinking or using the toilet and after
finishing work. Observe the usual precautions
when handling chemicals.
9. Physical and Chemical properties

Appearance : Smooth, thick pigmented paste with mild

ammoniacal odor.
pH : >7
Boiling point (C) : 100C
Melting point (C) : Not Available
Vapour pressure @25C (kPa) : Not Available
Solubility in water at 20C : Miscible
Specific gravity : 1.2 1.5
Flash point (C) : Not Applicable
Flammability limits : UEL - Not Applicable
LEL - Not Applicable

10. Stability and Reactivity

Chemical Stability : Stable under normal storage and application

temperatures.
Hazardous Polymerization : Product will not undergo polymerization.
Stability : Stable.Monoxide and Carbon Dioxide are formed

Made in U.A.E
Al-Muqarram Insulation Materials Industry L.L.C.
P.O.Box: 24756, Sharjah. U.A.E
Phone: + 971 6 5353796, Fax: + 971 6 5353964
Mail: [email protected], [email protected]
Website: www.muqarram.com
 AL MUQARRAM
INSULATION MATERIAL INDUSTRY L.L.C.
MATERIAL SAFETY DATA SHEET

DOLPHIN BITUMINOUS WATERPROOFING

Prepared on : 31-10-2015 Product Name : Dolphin Bituminous Waterproofing

Revision : 00 Product Code : Dolphin Bituminous Waterproofing
Page :5

11. Toxicological Information

ACUTE:
EYE CONTACT : The liquid is discomforting to the eyes and is capable of causing
a mild, temporary redness of the conjunctiva (similar to wind-
burn), temporary impairment of vision and/or other transient eye
damage/ulceration. The material may produce moderate eye
irritation leading to inflammation. Repeated or prolonged
exposure to irritants may produce conjunctivitis.
SKIN CONTACT : The material is mildly discomforting to the skin and is capable of
causing skin reactions, which may lead to dermatitis from
repeated exposures over long periods. The material may cause
skin irritation after prolonged or repeated exposure and may
produce on contact skin redness, swelling, the production of
vesicles, scaling and thickening of the skin.
INHILATION : Not normally a hazard due to non-volatile nature of product.
Inhalation of vapour is more likely at higher than normal
temperatures. The mist is discomforting to the upper respiratory
tract.
INGESTION : Considered an unlikely route of entry in commercial/industrial
environments. The material is discomforting to the gastro-
intestinal tract if swallowed.
CHRONIC : Prolonged or repeated skin contact may cause drying with cracking, irritation and
possible dermatitis following.
12. Ecological Information

Ecology: Do not discharge into sewers.

13. Disposal Consideration

State/Territory Authority : Observe all Federal, State and Local regulations

Dispose Secure Landfill : Yes
Dispose High Temp. Incinerator : No

Wash empty packaging. They can be reuse after thorough and proper cleaning.

Made in U.A.E
Al-Muqarram Insulation Materials Industry L.L.C.
P.O.Box: 24756, Sharjah. U.A.E
Phone: + 971 6 5353796, Fax: + 971 6 5353964
Mail: [email protected], [email protected]
Website: www.muqarram.com
 AL MUQARRAM
INSULATION MATERIAL INDUSTRY L.L.C.
MATERIAL SAFETY DATA SHEET

DOLPHIN BITUMINOUS WATERPROOFING

Prepared on : 31-10-2015 Product Name : Dolphin Bituminous Waterproofing

Revision : 00 Product Code : Dolphin Bituminous Waterproofing
Page :6

14. Transportation Information

UN Number : None allocated

Dangerous Goods Class : None allocated
Subsidiary Risk : None allocated
EPG Card : None allocated
Shipping Name : None allocated
Packing Group : None allocated

Not classified as a dangerous good by the criteria of the ADG code.

Not subject to CPL/ADR restrictions.

15. Other Information

- The information contained in this MSDS is presented in good faith, based on information available
and is subject to change without notice.

- Al Muqarram Insulation Materials Industry L.L.C makes no warranties, expressed or implied,

including but not limited to, any implied warranty of merchantability or fitness for the practical
purpose or course of performance of trade.

Made in U.A.E
Al-Muqarram Insulation Materials Industry L.L.C.
P.O.Box: 24756, Sharjah. U.A.E
Phone: + 971 6 5353796, Fax: + 971 6 5353964
Mail: [email protected], [email protected]
Website: www.muqarram.com