0% found this document useful (0 votes)
132 views

Cipwnormexcel

This program analyzes a rock sample and calculates its normative mineralogy. It reports the sample's oxide composition and normalization factors used. It then shows the normalized analysis and calculates the weight percentages of normative minerals that make up the theoretical mineral assemblage of the sample. Additional calculations include differentiation indexes and physical properties of the theoretical melt.

Uploaded by

Howel Turner
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
132 views

Cipwnormexcel

This program analyzes a rock sample and calculates its normative mineralogy. It reports the sample's oxide composition and normalization factors used. It then shows the normalized analysis and calculates the weight percentages of normative minerals that make up the theoretical mineral assemblage of the sample. Additional calculations include differentiation indexes and physical properties of the theoretical melt.

Uploaded by

Howel Turner
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Norm Calculation Program Program run: 2/10/2017

Sample Number:

Rock Normalization Normalized Normative Weight %


Analysis Factors Analysis Minerals Norm
SiO2 58.88 % Total=100%? Y/N n 58.88 Quartz 8.94
TiO2 0.79 % Fe3+/(Total Iron) 0 0.79 Plagioclase 44.48
Al2O3 15.29 % 15.29 Orthoclase 20.40
Fe2O3 0.87 % Total Fe as FeO 6.25 0.87 Nepheline 0.00
FeO 5.47 % Desired Fe2O3 0.87 5.47 Leucite 0.00
MnO 0.07 % Desired FeO 5.47 0.07 Kalsilite 0.00
MgO 3.79 % Weight corr. factor 1.000 3.79 Corundum 0.00
CaO 5.10 % 5.10 Diopside 4.24
Na2O 3.26 % 3.26 Hypersthene 15.50
K2O 3.01 % 3.01 Wollastonite 0.00
P2O5 0.50 % Zero values not shown 0.50 Olivine 0.00
CO2 0.00 % 0.00 Larnite 0.00
SO3 % 0.00 Acmite 0.00
S 0.00 % 0.00 K2SiO3 0.00
F 0.00 % Norm calculation checks: 0.00 Na2SiO3 0.00
Cl 0.00 % Norm seems OK 0.00 Rutile 0.00
Sr 0 ppm 0.00 Ilmenite 1.50
Ba 3200 ppm 0.36 Magnetite 1.26
Ni 0 ppm 0.00 Hematite 0.00
Cr 0 ppm 0.00 Apatite 1.16
Zr 0 ppm 0.00 Zircon 0.00
Total 97.01 97.39 Perovskite 0.00
Chromite 0.00
Sphene 0.00
Pyrite 0.00
Halite 0.00
Fluorite 0.00
Anhydrite 0.00
Na2SO4 0.00
Calcite 0.00
Na2CO3 0.00
Total 97.48
Fe3+/(Total Fe) in rock 12.5
Mg/(Mg+Total Fe) in rock 51.9
Mg/(Mg+Fe2+) in rock 55.3
Mg/(Mg+Fe2+) in silicates 60.3
Ca/(Ca+Na) in rock 46.4
Plagioclase An content 36.6
Differentiation Index 73.8
Calculated density, g/cc 2.82
Calculated liquid density, g/cc 2.54
Calculated viscosity, dry, Pas 0.48
Calculated viscosity, wet, Pas 0.43
Estimated liquidus temp., C 1022
Estimated H2O content, wt. % 1.59
This program was written by Kurt Hollocher, Geology Department, Union College, Schenectady, NY, 12308, [email protected]
HELP

Volume %
Norm
9.75
48.13
23.04
0.00
0.00
0.00
0.00
3.65
12.78
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.91
0.70
0.00
1.05
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
100.01
12.5
51.9
55.3
60.3
46.4
36.6
80.9
2.82
2.54
0.48
0.43
1022
1.59
[email protected]

You might also like