Chhattisgarh Swami Vivekanand Technical University, Bhilai (C.G.

)
SCHEME OF TEACHING AND EXAMINATION
B.E. VIII SEMESTER MECHANICAL ENGINEERING
PERIODS PER SCHEME OF EXAM
S. Board of WEEK Theory/Practical Total Credit
No.
Sub. Code SUBJECT L+(T+P)/2
Study Marks
L T P ESE CT TA
1. Mech. Engg Robotics 4 1 - 80 20 20 120 5
337831(37)
Finite Element
2. Mech. Engg 337832(37) 4 1 - 80 20 20 120 5
Methods
Industrial
3. Mech. Engg 337833(37) Engineering & 4 1 - 80 20 20 120 5
Management
Professional
4 Refer Table - III 4 1 - 80 20 20 120 5
Elective-III
Open Elective-
5 Refer Table - IV 4 1 - 80 20 20 120 5
IV
6 Mech. Engg 337861(37) Robotics Lab - - 2 40 - 20 60 1
Finite Element
7 Mech. Engg 337862(37) - - 2 40 - 20 60 1
Methods Lab
Industrial
Engineering &
8 Mech. Engg 337863(37) - - 2 40 - 20 60 1
Management
Lab
9 Mech. Engg 337864(37) Major Project - - 6 100 - 80 180 3
Report Writing
10 Mech. Engg 337865(37) - - 2 - - 40 40 1
& Seminar
11 Library - - 1 - - - - -
1
Total 20 5 620 100 280 1000 32
5
L Lecture, T Tutorial, P Practical,
ESE End Semester Exam, CT Class Test, TA Teachers Assessment

Table III
Professional Elective - II
S.No. Branch Subject Code Subject
1 Mechanical 337841(37) Mechatronics
2 Mechanical 337842(37) Vibration & noise control
3 Mechanical 337843(37) Optimization Techniques
4 Mechanical 337844(37) Computational Fluid Dynamics
5 Mechanical 337845(37) Soft Computing Techniques
6 Mechanical 337846(37) Environment Pollution & Control
7 Mechanical 337847(37) Mechanical Handling System & Equipments

Note: (1) 1/4th of total strength of students subject to minimum strength of 20 students is required to offer and
elective in the college in a particular academic session.
Note: (2) Choice of elective course once made for an examination cannot be changed in future examinations.
 Table - IV

Open Elective IV
S.No. Board of Studies Code Name of Subject
1 Management 300851(76) Enterprise Resource Planning
2 Information Technology 300852(33) E-Commerce & strategic IT
3 Management 300853(76) Technology Management
Decision Support & Executive
4 Information Technology 300854(33)
Information system
5 Computer Science & Engg. 300855(22) Software Technology
6 Management 300856(76) Knowledge Entrepreneurship
7 Management 300857(76) Finance Management
Project Planning, Management &
8 Management 300858(76)
Evaluation
9 Mechanical Engg. 300859(37) Safety Engineering
10 Computer Science & Engg. 300801(22) Bio Informatics
11 Mechanical Engg. 300802(37) Energy Conservation & Management
12 Nanotechnology 300803(47) Nanotechnology
13 Management 300804(76) Intellectual Property Rights
14 Mechanical Engg. 300805(37) Value Engineering
15 Civil Engg. 300806(20) Disaster Management
16 Civil Engg. 300807(20) Construction Management
17 Civil Engg. 300808(20) Ecology and Sustainable Development
18 Chem. Engg. 300809(19) Non Conventional Energy Sources
19 Electrical Engg. 300810(24) Energy Auditing and Management
20 Mechanical Engg. Managing Innovation &
300811(37)
Entrepreneurship
21 Information Technology 300812(33) Biometrics
22 Information Technolgy 300813(33) Information Theory & Control
23 Computer Science & Engg. 300814(22) Supply Chain Management
24 Computer Science & Engg. 300815(22) Internet & Web Technology
25 Electrical Engg. 300816(24) Electrical Estimation and Costing
26 Electrical& Electronics Engg. 300817(25) Non Conventional Energy Sources
Note (1)-1/4th of total strength of students subject to minimum
Note -1/4th of total strength of students is required to offer an elective in thecollege in a particular academic
session.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai

Name of program: Bachelor of Engineering

Branch: Mechanical Engineering Semester: VIII
Subject: Robotics Code: 337831(37)
Total Theory Periods: 40 Total Tutorial Periods: 10
Class Tests: Two (Minimum) Assignments: Two (Minimum)
ESE Duration: Three Hours Maximum Marks: 80 Minimum Marks: 28

Course Objectives:
To acquire the knowledge of basics of robotics and their importance.
Understand fundamental theory of robot design.
To acquire the knowledge on advanced algebraic tools for the description of motion.
To develop the ability to analyze and design the motion for articulated systems.
To acquire the knowledge of sensors, actuators and vision system used in robotics.

UNIT I : Introduction
Fixed & flexible automation, evolution of robots and robotics, laws of robotics, progressive, advancement in robots,
manipulator anatomy, arm configuration & work space, human arm characteristics, design and control issues,
manipulation and control, actuators, sensors and vision, programming of robots, applications material handling,
processing applications, assembly applications, inspection applications etc, the future prospects, notations.

UNIT II : Coordinate Frames, Mapping and Transforms

Coordinate frames, description of objects in space, transformation of vectors, inverting a homogeneous transform,
fundamental rotation matrices. mechanical structure and notations, description of links and joints, kinematic modeling of
the manipulator, Denavit Hartenberg notation, kinematic relationship between adjacent links, manipulator
transformation matrix.

UNIT III : Kinematic Modeling of Robots

Position analysis - direct and inverse kinematic models of robotic manipulators, various examples. velocity analysis
Jacobian matrix, introduction to inverse kinematic model.

UNIT IV : Robotic Sensors and Vision

Introduction regarding sensing technologies, sensors in robotics, classification, characteristics, internal sensors position,
velocity, acceleration sensors, force sensors, external sensors proximity, touch and slip sensors. robotic vision, process
of imaging, architecture of robotic vision systems, image acquisition, components of vision system, image representation,
image processing.

UNIT V : Motion Planning and Control of Robot Manipulators

Trajectory planning of robotic manipulator: joint space and Cartesian space techniques. open and close loop control, linear
control schemes, examples of control models.
Robot applications
Industrial applications, material handling, processing applications, assembly applications, inspection application,
principles for robot application and application planning, justification of robots, robot safety, non-industrial applications,
robotic application for sustainable development.

Text Books:
1. Robotics & Control R.K. Mittal & I.J. Nagrath TMH Publications.
2. Introduction to Robotics Analysis, Systems Applications - Saced B. Niku, Pearson
Reference Books:
1. Principle of Robot Motion- Choset PHI, Delhi
2. Kinematics and Synthesis of linkages Hartenberg and Denavit McGraw Hill.
3. Robotics Control Sensing - Vision and Intellgence K.S. Fu, McGraw Hill.
4. Robotic Engineering An Integrated Approach - R.D. Klafter PHI. Delhi.
5. Introduction to Robotics - S.K. Saha Mc Graw Hill.
6. Introduction to Robotics Mechanics and Control - John J. Craig

Course Outcomes:
Apply knowledge of robotics for understanding, formulating and solving engineering problems.
Acquire knowledge and hands-on competence in applying the concepts in the design and development robots
Demonstrate creativeness in designing and development of robotics.
Identify, analyze and design of robots useful to the society.
Work effectively with multidisciplinary robots.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of program: Bachelor of Engineering
Branch: Mechanical Engineering Semester: VIII
Subject: Finite element methods Code: 337832(37)
Total Theory Periods: 40 Total Tutorial Periods: 10
Class Tests: Two (Minimum) Assignments: Two (Minimum)
ESE Duration: Three Hours Maximum Marks: 80 Minimum Marks: 28

Course objective
Understand the fundamental concepts of FEM.
Understanding the use and knowledge of fundamental stiffness matrix.
Know the behaviour and usage of each type of elements covered in this course.
Be able to prepare a suitable FE model for structural mechanical analysis problems.
Can interpret and evaluate the quality of the results
Be aware of the limitations of the FEM.

Unit-I : Formulation of Finite Element Equation starting from governing differential equation, Domain residual and
minimization, Weighted residual method, Weak form of weighted residual method, solution of weak form using trial
function, piecewise continuous trial function solution, formulation of one dimensional bar element using weak form of
weighted residual element
Minimization of potential energy, Rayleigh-Ritz method, Piece-wise continuous trail function, finite element form of
Rayleigh-Ritz method, finite element formulation derived from a functional, formulation of bar element and heat transfer
element using Rayleigh-Ritz method

Unit-II : One dimensional finite element analysis, generic form of total potential for one dimensional case, determination
of shape functions for linear bar finite element and quadratic bar finite element, stiffness matrix, one dimensional
problems of structure mechanics and heat conduction

Unit-III : Stiffness matrix formulation for beam and frame element, Determination of shape functions and element
matrices, Application problems

Unit-IV : Two dimensional finite element analysis, simple three node triangular elements, four node rectangular element,
six node triangular element, natural coordinates, coordinate transformation, simple two dimensional problems, Gauss
Quadrature Technique

Unit-V : Finite element analysis for plane stress and plane strain problem, Strain displacement matrix for 2-D elements,
two-dimensional integrals. Application problems, Scalar field problems including heat conduction and flow problems.

TEXT BOOKS
1. Textbook of Finite Element Analysis Seshu P Prentice Hall of India.
2. Fundamentals of Finite Element Analysis - David Hutton TMH, Delhi

REFERENCE BOOKS
1. Finite Element Method: Basic concepts & Applications- Alavala PHI, Delhi
2. Finite Element in Engineering - T.R. Chandrupatla and Belegundu, Pearson,Singapore
3. Concepts and Applications of Finite element analysis - Cook, Robert John Wiley
4. The Finite Element Method, A Practical Course - Liu and Quek. McGraw Hill
5. The Finite Element Method in Engineering - S.S. Rao.
6. An Introduction to the Finite Element Method J.N. Reddy TMH, Delhi
7. Finite Element Method Zienkiewicz. O C - TMH, Delhi
8. Finite Element Analysis: Theory And Programming Krishnamoorthy C.S.- TMH, Delhi
9. Finite Element Procedure K.J.Bathe Prentice Hall of India
10. A First Course in The Finite Element Method Logan Cenegage Learning

Course Outcome
Apply knowledge of finite element method for understanding, formulating and solving engineering problems.
Acquire knowledge and hands-on competence in applying the concepts finite element method in the analysis of structural
and thermal systems.
Demonstrate creativeness in designing new systems components and processes in the field of engineering
Identify, analysis, and solve mechanical engineering problems useful to the society.
Work effectively with engineering and science teams as well as with multidisciplinary problems.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai

Name of program: Bachelor of Engineering

Branch: Mechanical Engineering Semester: VIII
Subject: Industrial Engineering & Management Code: 337833(37)
Total Theory Periods: 40 Total Tutorial Periods: 10
Class Tests: Two (Minimum) Assignments: Two (Minimum)
ESE Duration: Three Hours Maximum Marks: 80 Minimum Marks: 28
Course Objectives:
1. To impart capability of successfully planning, controlling, and implementing projects.
2. Understand and apply the principles of maths, science, technology and engineering, involving industry-relevant problems.
3. Contribute to the profitable growth of industrial economic sectors by using IE analytical tools, effective computational
approaches, and systems thinking methodologies.
4. Maintain high standards of professional and ethical responsibility.
5. Flourish and work effectively in diverse, multicultural environments emphasizing the application of teamwork and
communication skills.
6. Practice life-long learning to sustain technical currency and excellence throughout one's career.
Unit-I : Introduction
History & development, objective, place of Industrial Engineering in an organization, relation with other department, system approach
Plant Location
Need for a suitable location, Plant location problems factors affecting location, quantitative method for evaluation of plant location.
Plant Layout
Objective & Principles, factors affecting layout, types of layout.
Unit-II : Work Study
Purpose, objectives and applications of work study, Productivity and work study.
Method Study
Introduction, procedure, flow process charts, Multiple activity chart, motion economy principles, Therbligs, cycle graph and
chronocyclegraph.
Work Measurement
Definition, types, Time Study- selection & timing the job, rating, allowances, Numerical on Normal and standard time calculation.
Unit-III : Job Evaluation and Merit Rating
Definition, objectives, methods.
Wages and Incentives
Terminology, characteristics, factors, types of incentives, wage incentive plan, Rowan plan, Taylors differential piece rate system,
Emersons efficiency plan, Halseys 50-50 plan, Bedaux plan, Group task & Bonus system.
Unit-IV : Basic concepts and Functions of management
Nature, Purpose and Objectives of basic functions of management, Authority and Responsibility, social responsibility of manager,
ethics and management.
Human Resource Management
Nature and Scope of Human Resource Planning, Recruitment and Selection, Training and Development, Career Growth, Grievances,
Motivation needs and types, Maslow hierarchy of needs theory, Herzberg two factor theory, Need-want-satisfaction chain, Quality of
working life, job enrichment and job enlargement.
Unit-V :
Marketing Management
Marketing Environment, Marketing Mix, Advertising and Sales Promotion, Channels of Distribution.
Financial Management
Book keeping, financial statement Analysis, Financial Ratios, Capital Budgeting, Break-Even Analysis.
TEXT BOOKS
1. Industrial Engineering and Production Management -Martand Telsang - S.Chand.
2. Industrial Engineering & Management - S. Dalele & Mansoor Ali - Standard Publishers.
REFERENCE BOOKS
1. Industrial Engineering & Management ,A new perspective- Philip E Hicks - Mcgraw Hill
2. Company Essential of Management - H. Koonz and H. Weihrich Mcgraw Hill
3. Marketing Management- Kotler Philip- Prentice Hall of India
4. Flexibilty in Management - Sushil, Vikas publication - New Delhi
5. Human Resource Management - Luthans Fred - McGraw Hill, Inc.
6. Financial Management - M.Y. Khan and P.K. Jain - Tata Mc-Graw Hill
7. Fundamentals of Business Organizations and Management -Y.K. Bhusan - S. Chand
8. Industrial Management - K.K. Ahuja - Khanna Publishers
9. Introduction of work study - ILO, Geneva - Universal Publishing Corporation, Bombay
10. Motion and Time Study - Ralph M. Bannes - John Wiley & Sons
11. Work Study and Ergonomics - H.S. Shan - Dhanpat Rai & Sons
Course Outcomes:
Ability to apply mathematics and science in Industrial engineering.
Ability to design and conduct experiments, as well as to analyze and interpret data
Ability to identify, formulate, and solve engineering problems
Ability to use the techniques, skills, and modern engineering tools necessary for industrial engineering practice
Ability to design, develop, implement and improve integrated systems that include people, materials, information,
equipment, and people
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of program: Bachelor of Engineering
Branch: Mechanical Engineering Semester: VIII
Subject: Mechatronics Code: 337841(37)
Total Theory Periods: 40 Total Tutorial Periods: 10
Class Tests: Two (Minimum) Assignments: Two (Minimum)
ESE Duration: Three Hours Maximum Marks: 80 Minimum Marks: 28
Course Objectives:
To acquire the knowledge of basics of mechatronics and their scope.
To acquire the knowledge of sensors and transducers.
Understand fundamental of hydraulic and electrical actuators.
To acquire the knowledge of data acquisition system and control system.
To develop the ability to analyze and design mechatronics system.

UNIT I : Introduction about Mechatronics, scope of Mechatronics, application, process control automation
and N/c Machines.
UNIT II : Sensors and Transducers
Introduction, classification, specification, characteristics of transducers, type of transducers displacement,
strain, vibration pressure, flow, temperature, force & torque, tactile.
UNIT III : Hydraulic Pneumatic & Electrical actuators
Pumps & Compressors, control valves & accessories, actuators, fluid power symbols, fluid power systems,
switching devices, solenoids, motors.
UNIT IV : Data Acquisition and Control System
Introduction, Quantitizing theory, Analog to Digital Conversion, Digital to Analog (D/A) conversation, transfer
function, transient response & frequency response & frequency response, stability criteria.
UNIT V : Design of Mechatronics systems
Introduction, Automatic front and book and cutting in steel rolling mill, lift control system, CNC lathe,
temperature control of a heat treatment furnace, EOT crane control panel, Grey grain separators, electrode arm
control in electric arc furnace.
TEXT BOOKS
1. Mechatronics N. Shanmugam Anuradha Agencies
2. Mechatronics HMT Limited Tata McGraw hill,New Delhi
REFERENCE BOOKS
1. Mechatronics - Singh and Joshi PHI New Delhi
2. Mechatronics :A Multi Disciplinary Approach W. Bolton Pearson Education - Singapore
3. Mechatronics System Design - Shetty D, Kolk Ra PWS Publications, Boston
4. Mechatronics - Kamm, Lawrence J Prentice Hall Of India
5. Mechatronics & Measurement Systems Alciator David & Histand Michael TMH Dehi
6. Mechatronics - Necsulescu D Pearson, Singapore
7. Mechatronics Source Book N.C.Braga Cenegage Learning, Delhi
8. Mechatronics System Design Devdas Setty & Richrd Kolk - Cenegage Learning, Delhi
9. Analytical Robotics and Mechatronics - Stadler W Mcgraw Hill,New Delhi
10.Mechatronics: Electronics in Products & Processes- Bradley, D A; Dawson, D And Burd, N C Loader, A
J - Taylor And Francies - Boca Raton
Course outcomes:
Apply knowledge of mechatronics for understanding and solving engineering problems.
Acquire knowledge and hands-on competence in applying the concepts of mechatronics in the design
and development of mechanical systems.
Demonstrate creativeness in designing new systems components and processes in the field of
engineering in general and mechanical engineering in particular.
Identify, analyze and solve mechanical engineering problems useful to the society.
Work effectively with engineering and science teams as well as with multidisciplinary designs.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of program: Bachelor of Engineering
Branch: Mechanical Engineering Semester: VIII
Subject: Vibration & Noise Control Code: 337842(37)
Total Theory Periods: 40 Total Tutorial Periods: 10
Class Tests: Two (Minimum) Assignments: Two Minimum)
ESE Duration: Three Hours Maximum Marks: 80 Minimum Marks: 28

Course Objective:
Introduce students to the Fundamentals of vibrations.
Introduce students how to mathematical model the vibration and acoustics system.
Introduce students to vibration system with single degree of freedom
Introduce students to vibration system with multi-degree of freedom
Enable students to analisis and measurements of sound.
Introduce students to the noise and noise control.

UNIT- I : Fundamentals of vibrations

Simple harmonic motion, combination of two simple harmonic motions, beats, Fourier analysis Single degree of freedom
system: Free un-damped vibrations: Equivalent systems linear and torsional, natural frequency estimation, energy methods
Damped vibrations : Damping models, structural, coulomb, and viscous damping, critically, under and over-damped
system, logarithmic decrement
Forced vibrations : Harmonic excitation, support motion, vibration isolation, critical speeds of shafts in bending

UNIT- II : Two degree of freedom system

Free vibrations of spring coupled system, general solution, torsional vibrations, two degree of freedom mass coupled
system, bending vibrations in two degree of freedom system, forced vibrations of an undamped two degree of freedom
system, dynamic vibration absorber, forced damped vibrations

UNIT- III : Multi-degree of freedom system

Free un-damped analysis.
Numerical methods: Dunkerleys, Rayleigh, Holzer methods.

Experimental methods in vibration analysis:

Vibration measurement devices and analyzers, balancing of rigid rotors

UNIT- IV :Analysis and measurement of sound

One dimensional wave in a gas, sound perception and the decibel scale, the ear, combining sound levels in decibels,
octave bands, loudness, weightings, directionality of acoustic sources and receivers, directivity index

UNIT- V : Noise control

Noise criteria, sound absorption and insulation, noise barriers, acoustic enclosures, silencers

TEXT BOOKS
1. Mechanical Vibrations Thomson W T- Prentice Hill of India
2. Theory & Practice of Mechanical Vibrations J.S. Rao, Gupta - New Age International.
REFERENCE BOOKS
1. Mechanical Vibrations and Noise Engineering A G Ambekar PHI, Delhi
2. Mechanical Vibrations G.K. Grover - S. Chand & CO.
3. Acoustics for Engineers - Turner & Pretlove - Macmillan
4. Acoustics and Noise Control - Smith, Peters & Owen - Addison-Wesley-Longman.
5. Industrial Noise Control: Fundamentals and Applications - Bell and Bell, Marcel-Dekker
6. Vibration And Noise For Engineers Kewal Pujara Dhanpat Rai,Delhi
7. Environmental Noise Pollution and its Control G R Chhatwal Anmol Publications,Delhi
8. Noise Pollution and Control Singal S P Narosa Publications, Delhi
9. Mechanical Vibrations and Noise Controls Sadhu Singh Khanna Publisher, New Delhi
10. Fundamentals of Noise and Vibration - Fahy FJ, Walker JG - E&Fnspon New York
Course Objectives:
Apply knowledge of Vibration & Noise Control for understanding, formulating and solving engineering
problems.
Acquire knowledge and hands-on competence in applying the concepts in the design and development of
mechanical systems.
Demonstrate creativeness in designing new systems components and processes in the field of engineering
Identify, analysis, and solve mechanical engineering problems useful to the society.
Work effectively with engineering and science teams as well as with multidisciplinary problems.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of program: Bachelor of Engineering
Branch: Mechanical Engineering Semester: VIII
Subject: Optimization Techniques Code: 337843(37)
Total Theory Periods: 4 0 Total Tutorial Periods: 10
Class Tests: Two (Minimum) Assignments: Two (Minimum)
ESE Duration: Three Hours Maximum Marks: 80 Minimum Marks: 28

Course Objectives:
This course aims to introduce students to use advanced quantitative methods and techniques for effective
decisionsmaking; model formulation and applications that are used in solving business decision problems.
UNIT I : Optimization Technique
Classification of optimization, problems, single variable and multivariable optimization with equality
constraints and Inequality constraints. Convex programming problem.

UNIT II : Linear Programming - II

Duality in Linear programming, dual simplex method, decomposition principle, sensitivity analysis, quadratic
programming, changes in cost coefficient, golden section method.

UNIT III : Non-Linear Programming I

Rate of convergence, Design variables, Random search methods, Chrivariate methods, Powells
method, Newtons method, Marquard Method, Test function.

UNIT IV : Geometric Programming

Unconstrained minimization problem, primal dual relationship, geometric programming with mixed Erie
quality, application and complementary function.

UNIT- V : Dynamic Programming

Multistage Decision processes. principles of optimality, continuous dynamic programming.

TEXT BOOKS
1. Optimization Techniques C.S. Rao Dhanpat Rai & Sons, New Delhi
2. Optimization methods for Engineering Design R.L. Fox - Addison Wesley
REFERENCE BOOKS
1. Engineering Optimization Theory and Practice S.S. Rao New Age Publishers.
2. Introduction to optimum Design J.S. Arora Mc. Grawhill publishers
3. Optimization Methods for Engineering Raju PHI,Delhi
4. Foundation of Mathematical optimization Pallaschke Kluwer Academic Publishers
5. Optimization Methods in Operations Research and System AnalysisK V MittalWiley,Delhi
6. Engineering Optimization: Theory And Practice - Singiresu S Rao New Age
7. Optimization For Engineering Design- Deb, Kalyanmoy-Prentice Hall
8. Optimization Methods Mohan & Deep- New Age, Delhi
9. An Introduction to Optimization- Chang, Edwin& Zak Stanislaw -John Wiley, New York
10. Optimization Concepts And Applications In Engineering Belegundu & Chandrupatla-Pearson,Singapore
Course Objectives:
Ability to understand and analyze managerial problems in industry so that they are able to use resources
(capitals, materials, staffing, and machines) more effectively.
Knowledge of formulating mathematical models for quantitative analysis of managerial problems in
industry.
Skills in the use of Operations Research approaches and computer tools in solving real problems in
industry.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of program: Bachelor of Engineering
Branch: Mechanical Engineering Semester: VIII
Subject: Computational Fluid Dynamics Code: 337844(37)
Total Theory Periods: 40 Total Tutorial Periods: 10
Class Tests: Two (Minimum) Assignments: Two (Minimum)
ESE Duration: Three Hours Maximum Marks: 80 Minimum Marks: 28
Course Objective:
1. To introduce the student to widely used techniques in the numerical solution of fluid equations, issues that arise in the
solution of such equations, and modern trends in CFD.
2. To acquire core knowledge of the fundamentals of CFD for engineers, and an introduction to the methods and analysis
techniques used in CFD.
3. By studying a variety of flow situations students will develop a better intuition of fluid mechanics more quickly than is
possible with traditional analytical approaches.
4. Quantify and analyze the numerical error in CFD discetization schemes.
5. Develop finite difference and finite volume forms of the CFD equations and important model systems
6. Formulate explicit and implicit algorithms for solving the Navier-Stokes equations..
7. Understand and apply verification strategies for evaluating CFD code.
UNIT I
Fundamental Concepts
Introduction- Governing Equations of Fluid Dynamics. Mathematical Behavior of Partial Differential Equations - Elliptic,
Parabolic and Hyperbolic equations. Physical Classification of fluid dynamics problems, Well-posed problems.
UNIT II
Finite Element and Finite Difference Method
Overview of Finite Element and Finite difference Techniques in Computational Fluid Dynamics. Strong and Weak
Formulations of a Boundary Value Problem.
UNIT III
Finite Volume Schemes
General Discretisation Methodologies: Cell Centered Formulation- Lax-Vendoroff Time Stepping, Runge-Kutta Time
Stepping, Multi-stage Time Stepping. Cell Vertex Formulation - Multistage Time Stepping. Discretisation of convective
fluxes: Flux-vector splitting formulation, Flux-difference splitting formulation. Up-wind formulation.
UNIT IV
Discretization
Boundary layer Equations and methods of solution -Implicit time dependent methods for
inviscid and viscous compressible flows - Concept of numerical dissipation --Stability
properties of explicit and implicit methods - Conservative up-wind discretization for
Hyperbolic systems - Further advantages of upwind differencing.
UNIT V
Principles of Grid Generation
Structured grid: C-, H- and O-Grid topology. Algebraic, Elliptical and Hyperbolic Grid Generation, Unstructured grid:
Delaunay Triangulation, Advancing-Front Method, Generation of Anisotropic Grids, Mixed-Element/Hybrid Grids,
Assessment and Improvement of Grid Quality,
TEXT BOOKS
1. Introduction to computational fluid dynamics: the finite volume method - Versteeg, & Malalasekera - Addison-
Wesley.
2. Introduction to Computational Fluid Dynamics Niyog & Chakraborty Pearson ,Singapore
REFERENCES
1. Computational Techniques for Fluid Dynamics, - Vols. I and II - Fletcher C.A.J. Springer, Verlag, Berlin, 1988.
2. Computational Fluid Dynamics:An Introduction - John F. Wendt (Editor) Springer, Verlag, Berlin.
3. Numerical Computation of Internal and External Flows, Vols. I and II - Charles Hirsch - John Wiley & Sons, New
York.
4. Computational Fluid Dynamics for Engineers, Vols. I & II - . Klaus A Hoffmann and Steve T. Chiang - Engineering
Education System, W. Wichita, K.S., 67208 1078 USA.
5. Fundamentals of Aerodynamics - Anderson, Jr.D - McGraw Hill.
Contribution to Outcome:
Develop an understanding for the major theories, approaches and methodologies used in CFD.
Build up the skills in the actual implementation of CFD methods for mechanical engineering design, analysis
and application.
Work effectively with engineering and science teams as well as with multidisciplinary designs.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of program: Bachelor of Engineering
Branch: Mechanical Engineering Semester: VIII
Subject: Soft computing techniques Code: 337845(37)
Total Theory Periods: 40 Total Tutorial Periods: 10
Class Tests: Two (Minimum) Assignments: Two (Minimum)
ESE Duration: Three Hours Maximum Marks: 80 Minimum Marks: 28

Course Objectives:
To familiarize with concepts of soft computing
To introduce the ideas of neural networks, fuzzy logic and use of heuristics based on human
experience.
To introduce the concepts of Genetic algorithm and its applications to soft computing using some
applications.

UNIT I : Introduction - Introduction to soft computing; introduction to biological and artificial neural
network, introduction to fuzzy sets and fizzy logic systems.

UNIT II : Artificial neural networks and applications - Different artificial neural network models, learning in
artificial neural networks, neural network applications in control systems.

UNIT III : Fuzzy systems and applications - Fuzzy sets; fuzzy reasoning, fuzzy inference systems, fuzzy
control, fuzzy clustering, applications of fuzzy systems.

UNIT IV : Neuro-fuzzy systems - Neuro-fuzzy modeling, Neuro-fuzzy control.

Genetic Algorithms- Simple GA, crossover and mutation, genetic algorithms in search and optimization.

UNIT V : Applications- Pattern Recognitions, Image Processing, Biological Sequence Alignment and Drug
Design, Robotics and Sensors, Information Retrieval Systems, Share Market Analysis, Analysis language
processing.

TEXT BOOKS
1. Fuzzy Logic And Soft Computing Chen, Guoging, Ving, Mingsheng & Cai, Kai Yuan Ed - Kluwar
Academic Publications,Usa
2. Soft Computing and Intelligent Systems Design Theory Tools and Applications Karray F O & Desilva C
Pearson, New Delhi
REFERENCE BOOK
1. A Computational intelligence: principles, techniques, and applications - Konar - Springer.
2. Introduction to pattern recognition: statistical, structural, neural, and fuzzy logic approaches: Friedman, M
& Kandel, A. - World Scientific.
3. Neuro-fuzzy and soft computing: a computational approach to learning and machine intelligence - Jang, J S
R, Sun, C T, & Mizutani E - Prentice Hall.
4. An introduction to genetic algorithms- Mitchell M - MIT press.
5. Fuzzy Logic with Engineering Applications - Ross T J - John Wiley & Sons
Course Outcomes:
Identify and describe soft computing techniques and their roles in building intelligent machines
Recognize the feasibility of applying a soft computing methodology for a particular problem
Apply fuzzy logic and reasoning to handle uncertainty and solve engineering problems
Apply genetic algorithms to combinatorial optimization problems
Apply neural networks to pattern classification and regression problems
Effectively use existing software tools to solve real problems using a soft computing approach
Evaluate and compare solutions by various soft computing approaches for a given problem.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of program: Bachelor of Engineering
Branch: Mechanical Engineering Semester: VIII
Subject: Environmental Pollution & Control Code: 337846(37)
Total Theory Periods: 4 0 Total Tutorial Periods: 10
Class Tests: Two (Minimum) Assignments: Two (Minimum)
ESE Duration: Three Hours Maximum Marks: 80 Minimum Marks: 28
Course Objectives:
To provide an introduction to Environmental Pollution.
To develop an understanding of the causes, chemistry and effects of pollution.
To build awareness of the strategies used to control and manage pollution.
To make aware of Environmental Laws & Acts
UNIT-I
Environmental Pollution Introduction & Classification
Sources and classification of air pollutants, aerosols, primary and secondary air pollutants, effect of air pollution on human
health, effect of SO2, CO2, NO2 H2S and lead, economic effect of air pollution, mechanism of deterioration in polluted
atmosphere. Factors influencing atmospheric deterioration, effect of air pollution on building materials, paints, textiles,
rubber, leather, paper and electronic industry.
UNIT II
Environmental Pollution - Sources
Air pollution due to automobiles, exhaust, Crankcase and evaporative emissions and their control,
effect of various parameters of I.C. engines on air pollution, photochemical air pollution, air pollution from ferrous
metallurgical operations and thermal power plants.
UNIT III
Chemistry of Pollution
Definition of pollutant concentrations, mass concentration, volume concentration, mass-volume
concentration and relationship between these concentrations, smoke and its control. Ningalmam smoke chart, smoke
prevention and control of air pollution by process change, elementary ideas of control of gaseous contaminants for
combustion and absorption.
UNIT IV
Pollution Control
Control of air pollution by equipment, objectives of using control equipment, objectives of using control equipment,
settling chambers, inertial separators, cyclones, principle of electroscopic precipitators, descriptive study of the above
equipment only, merits and demerits of the equipment, choice of equipment.
UNIT V
Environmental Laws & Acts
Air pollution indices, definition of air pollution index, type and use of air pollution indices, criteria for a standardized
index, acid rain, causes of acid rain and its remedy, green house and its effect, air pollution legislation and regulations,
constitution of the Board, functions of the central board and state boards, classification of pollution sources under Air Act
1981 and 1986.
TEXT BOOKS
1. Environmental Chemistry and Pollution Control - S S Dara S Chand , New Delhi
2. Air Pollution - M.N. Rao and H.V.N. Rao TMH, New Delhi.
REFERENCE BOOKS
1. Air Pollution Control Theory - Martin Crawford.- TMH, New Delhi
2. Encyclopaedia of Environment Control Technology & Air Pollution Control Cheremisinott P N Gulf Publication,
London
3. Pollution Control Hand Book - Utility Publication,Securndarabad
4. Environmental Pollution Conservation And Planning - Pashupatinath & Siddh Nath - Chugh Publications, Allahabad
5. Environmental Air Pollution and Its Control - Chhatwal, Mehra & Katyal - Anmol Publications, New Delhi
6. Environmental Pollution Control Engineering Rao C S Wiley, New Delhi
7. Environmental Pollution Analysis Khopkar S M- Wiley, New Delhi
8. Air Pollution Control Technology - R.W. Bethewaven - Van Nostrans.
9. Air Pollution & Control KVSG Murali Krishnan Kaushal & Company
10. Air Pollution & Control Technologies Y. Anjaneyulu Allied Publishers
11. Water & Air Pollution & Environmental Protection Laws, Vol. - II M C Mehta Delhi Law House
Course Outcomes
Understand contemporary pollution issues.
Have insight into specific examples of environmental pollution.
Understand the causes and effects of key types of environmental pollution.
Appreciate different pollution control strategies.
Awareness of Environmental Laws & Acts
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of program: Bachelor of Engineering
Branch: Mechanical Engineering Semester: VIII
Subject: Mechanical Handling System and Equipments Code: 337847(37)
Total Theory Periods: 4 0 Total Tutorial Periods: 10
Class Tests: Two (Minimum) Assignments: Two (Minimum)
ESE Duration: Three Hours Maximum Marks: 80 Minimum Marks: 28
Course Objectives:
To introduce to the importance of proper material handling and storage techniques.
To introduce to selection of material handling equipment
To introduce to design considerations of mechanical handling equipment and load lifting attachments
UNIT I
Elements of Material Handling System
Importance, Terminology, objectives and benefits of better Material Handling, Principles and features of
Material Handling System, Interrelationships between material handling and plant layout, physical facilities
and other or organizational functions, Classification of Material Handling Equipment.
UNIT II
Selection of Material Handling Equipment
Factors affecting for selection, Material Handling Equation, Choices of Material Handling Equipment, General
analysis Procedures, Basic Analytical techniques, the unit load concept Selection of suitable types of systems
for applications, Activity cost data and economic analysis for design of components of Material Handling
Systems, functions and parameters affecting service, packing and storage of materials.
UNIT III
Design of Mechanical Handling Equipment
Design of Hoists, Drives for hoisting, components, and hoisting mechanisms, rail traveling components and
mechanisms, hoisting gear operation during transient motion, selecting the motor rating and determining
breaking torque for hoisting mechanisms. Design of Cranes, Hand-propelled and electrically driven E.O.T
overheat traveling cranes, Traveling mechanisms of cantilever and monorail cranes, design considerations for
structures of rotary and cranes with fixed radius, fixed post and overhead traveling cranes, Stability of
stationary rotary and traveling rotary cranes.
UNIT IV
Design of load lifting attachments
Load chains and types of ropes used in Material Handling System, Forged, Standard and Ramshorn Hooks,
Crane Grabs and Clamps, Grab Buckets, Electromagnetic Design consideration for conveyor belts, Application
of attachments.
UNIT V
Study of systems and Equipment used for Material Storage
objectives of storage, Bulk material handling, Gravity flow of solid through slides and chutes, Storage in bins
and hoppers, Belt conveyors, Bucket-elevators, Screw Conveyors, cabin vibratory Mobile racks etc.
Text Books:
1. Material Handling Equipments - N. Rudenko - Peace Publishers, Moscow.
2. Material handling System Design - James M. Apple, John-Wiley Publication, New York.
Reference Books:
1. Materials Handling Principals and Practice - Allegri T H - CBS Publication, New Delhi
2. Material Handling - John R. Immer - McGraw Hill Co. Ltd., New York.
3. Material Handling in Machine shops - Machinery Publication Co. Ltd., London.
4. Material Handling Equipment - M. P. Nexandrn - MIR Publication, Moscow.
5. Bulk Solid Handling - C. R. Cock and J. Mason - Leonard Hill Publication Co. Ltd. U.S.A.
6. Material Handling Hand Book - Kulwiac R. A - John Willy Publication, New York.
Course outcomes
The students will be able to identify material handling equipment requirements for a specific process
and for various locations and working conditions
The students will be able to understand the benefit of an efficient material handling system
The students will be able to recognize the importance of material storage equipments.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of program: Bachelor of Engineering
Branch: Mechanical Engineering Semester: VIII
Subject: Safety Engineering Code: 300859(37)
Total Theory Periods: 4 0 Total Tutorial Periods: 10
Class Tests: Two (Minimum) Assignments: Two (Minimum)
ESE Duration: Three Hours Maximum Marks: 80 Minimum Marks: 28
Course Objectives:
To Know safety philosophy and principles of accident prevention
To know the safety rules, regulations, standards and codes
To achieve an understanding of principles of safety management.
To learn about various functions and activities of safety department.
To study various mechanical machines and their safety importance.
UNIT I
Safety philosophy and principles of accident prevention
Introduction, accident, injury, unsafe act, unsafe condition, reportable accidents, need for safety, break down of accidents,
hazardous industries. Theories & principle of accidents casualty, cost of accident, computation of cost, utility of cost data.
Accident reporting & Investigation, Identification of the key facts, corrective actions, classification of facts.
Regulation- American (OSHA) and Indian Regulation.
UNIT II
Safety Management
Division of responsibility, location of Safety function, size of safety department, qualification, for safety specialist, safety
committee structure and functions.
UNIT III
Safe working condition and their development
Standard Operating Procedure (SOP) for various mechanical equipments, incidental safety devices and methods, statutory
of provisions related to safeguarding of Machinery and working condition.
UNIT IV
Safety in Operation and Maintenance
Operational activities and hazards, starting and shut down procedures, safe operation of pumps, compressor, heaters,
reactors, work permit system, entry into continued spaces.
UNIT V
Safety in Storage and Emergency Planning
Safety in storage, handling of chemicals and gases, storage layout, ventilation, safety in chemical laboratories, emergency
preparedness on site plan, off site plan, toxic hazard control.
TEXT BOOKS
1. Safety Management : Strategy And Practice - Pybus R - Butterworth Heinmann, Oxford
2. Safety and Accident Prevention in Chemical Operation H.H. Faweett and Wood
REFERENCE BOOKS
1. Industrial Safety Management- Trafdar N K, Tarafdar K J Dhapat Rai, New Delhi
2. Safety Management In Industry- Krishna, N V- Jaico Publication House; New Delhi
3. Industrial Safety And Pollution Control Hand Book - Nagraj, J N & Rameshchandar, R V - Associate Publisher,
Securndabad
4. Fire and Safety Manual Refineries and Petrochemical Panel - National Safety Counsil, Bombay
5. Safety in Use of Compressed Gas Cylinders - National Safety Counsil, Bombay
6. Encyclopaedia of Occupational Health and Safety - Stallman I M, Mccann M, Warshaw L, Brabant C - International
Labour Office,Geneva
7. Industrial Safety Environmental Pollution Health Hazard And Nuclear Accidents - A Chand - Mittal Publication,
New Delhi
8. Personal Protective Equipment National Safety Counsil, Bombay
9. Accident Prevention Manual for Business and Industrial Administration and Programs - Krieger, G R Montgomerji -
National Safety Council, Ittenois.
10. Major Hazard Control A Practical Manual ILO - National Safety Counsil, Bombay
Course Outcomes:
Ability to understand the functions and activities of safety engineering department.
Apply knowledge of safety engineering specialization for hazard identification, risk assessment and control of
occupational hazards.
Communicate effectively on health and safety matters among the employees and with society at large.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of program: Bachelor of Engineering
Branch: Mechanical Engineering Semester: VIII
Subject: Value Engineering Code: 300805(37)
Total Theory Periods: 4 0 Total Tutorial Periods: 10
Class Tests: Two (Minimum) Assignments: Two (Minimum)
ESE Duration: Three Hours Maximum Marks: 80 Minimum Marks: 28
Course Objectives:
The objective of this course is to introduce students with the methodology of Value Engineering and its
decision-making process.
To familiarize students with procedures that provides standards for Value Engineering applications.
To teach value engineering in a practical, project-based manner.
During the course student will be engaged in decision-making using Value Engineering tools to ensure
quality and value while reducing the cost of projects.
Student will know about a number of case study applications of the Value Engineering to gain practical
experience.
UNIT I : Basic Concepts
Meaning of the term value, basic kind, reasons for poor value, value addition, origin and history.
Benefits, relevance in Indian scenario.
UNIT II : Techniques
Different techniques, organizing value engineering study, value engineering and quality.
UNIT III : Job Plan
Different phases, General phase, Information phase, Functional Phase, Creation Phase, Evaluation Phase,
Investigation Phase, Implementation Phase, Audit.
UNIT IV : Selection of evaluation of VE Projects
Project selection, method selection, value standard, application of methodology.
UNIT V : Value Engineering Program
VE operations in maintenance and repair activities, VE Cost, life cycle, cost model, training for VE, general
value engineering, case studies.
TEXT BOOKS
1. Value Engineering a How to Manul S.S. Iyer New Age International Publishers, New Delhi
2. Industrial Engineering & Management O.P. Khanna Dhanpat Rai & Sons
REFERENCES
1. Techniques of Value Analysis and Engineering L.D. Miles McGraw Hill, New York
2. Value Engineering: A Systematic Approach A.E. Mudge McGraw Hill, New York
3. Getting More at Less Cost: The Value Engineering Way - Jagannathan G - TMH,New Delhi
4. Value Engineering a Practical Approach for Owners Designers & Constructions Zimmerman LW &
Gilen HD CBS, New Delhi.
5. Compendium on Value Engineering H.G. Tufty Indo-American Society.
Course Outcome:
Understand the basics of Value Engineering (VE) to ensure that a standardized method is used for VE
applications to projects
Learn to perform function analysis for projects
Understand the appropriate time to apply VE for projects
 Chhattisgarh Swami Vivekanand Technical University, Bhilai

Name of program: Bachelor of Engineering

Branch: Mechanical Engineering Semester: VIII
Subject: Managing Innovation & Entrepreneurship Code: 300811(37)
Total Theory Periods: 40 Total Tutorial Periods: 10
Class Tests: Two (Minimum) Assignments: Two (Minimum)
ESE Duration: Three Hours Maximum Marks: 80 Minimum Marks: 28

Course Objective

1. The course will provide a thorough coverage of conceptual framework on Entrepreneurship

development.
2. Enhances students innovation skill.
3. Helps to provide a quick understanding of essential concepts and issues.
4. Enhance the students to have an understanding about international entrepreneurship.
5. Understand the problems and prospects related to setting up of any type of business.

UNIT I
Introduction to Entrepreneurship
Evolution of entrepreneurship from economic theory Managerial and entrepreneurial growth and development.

UNIT II
Creativity and Innovation
Creativity and Innovation: Concepts shifting composition of the Economy purposeful innovation and the seven
sources of innovative opportunity the innovation process. Innovative strategies: Strategies that aim at
introducing an innovation. Innovation and entrepreneurship: Can they together? Planning innovation and
entrepreneurship.

UNIT III
Entrepreneurial Motivation
Need for continuous learning & relearning Acquiring technological Innovation Entrepreneurial motivation
(nAch story) Achievement Motivation in Real life. Case Study.

UNIT IV
International Entrepreneurship
Concepts and nature of international entrepreneurship. The changing international environment. Ethics and
international entrepreneurship. Strategic issues in international entrepreneurship.

UNIT V
Problem identification and problem solving
Problem identification. Problem solving. Innovation and diversification.

TEXT BOOK
1. Managing innovation and entrepreneurship in technology based firm-Martin M J-John Willey
2. Managing technology innovation- Ettlite I E - John Willey & Sons.
REFERENCE BOOKS
1. discipline of innovation - Drucker P F -The Harvard business school press , May-June1985.
2. The innovators solution: Creating and sustaining successful growth - Christensen, C. M. and Raynor, M.E.
(2003) - Boston, M. A.: Harvard Business School Press.
3. Innovation(Collection of articles) - Drucker, P. F. (1985) - Harvard Business School Press(2001).
4. Harvard Business Review on entrepreneurship(Collection of articles) - Harvard Business School Press
5) Diffusion of innovations, 5th edition - Rogers, E. M. (2003) - New York: Simon and Schuster.
Course Outcomes
Work effectively with engineering and science teams
 Chhattisgarh Swami Vivekanand Technical University, Bhilai

Name of program: Bachelor of Engineering

Branch: Mechanical Engineering Semester: VIII
Subject: Robotics Lab Code: 337861(37)
Total Lab Periods: 24 Batch Size: 30
Maximum Marks: 40 Minimum Marks: 20

List of Experiments:
1. Demonstration of Cartesian/ cylindrical/ spherical robot.
2. Demonstration of Articulated/ SCARA robot.
3. Virtual modeling for kinematics and dynamic verification any one robotic structure using suitable software.
4. Design, modeling and analysis of two different types of grippers.
5. Study of sensor integration.
6. Two program for linear and non-linear path.
7. Study of robotic system design.
8. Programming for forward kinematics problems.
9. Dynamic analysis of manipulators using software.
10. Study and demonstration of actuators and vision system.
11. Study of various robotic applications.
12. Setting robot for any one industrial application after industrial visit.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of program: Bachelor of Engineering
Branch: Mechanical Engineering Semester: VIII
Subject: Finite Element Methods Lab Code: 337862(37)
Total Lab Periods: 2 4 Batch Size: 30
Maximum Marks: 40 Minimum Marks: 20

Minimum eight assignments are to be completed on following area using appropriate Software.

1. Structural Analysis
2. Thermal Analysis
3. Fluid Flow Analysis
4. Coupled Field Analysis
5. Modal Analysis

Minimum four problems shall be solved with Manual calculations in any of area specified above.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of program: Bachelor of Engineering
Branch: Mechanical Engineering Semester: VIII
Subject: Industrial Engineering & Management Lab Code: 337863(37)
Total Lab Periods: 24 Batch Size: 30
Maximum Marks: 40 Minimum Marks: 20

EXPERIMENTS TO BE PERFORMED (MINIMUM TEN EXPERIMENTS)

1. To prepare the charts & diagrams for a selected problem according to the existing method and an improved
method -men type flow process chart.
2. To prepare the charts & diagrams for a selected problem according to the existing method and an improved
method -material type flow process chart
3. To prepare the charts & diagrams for a selected problem according to the existing method and an improved
method -machine type flow process chart
4. To prepare the charts & diagrams for a selected problem according to the existing method and an improved
method multiple activity chart.
5. Study of principles of fundamentals of hand motion.
6. Study & applications of principles of motion economy.
7. Performance of micro motion study of a job.
8. Problems in assignment of men & machines.
9. Training for a performance rating using walking exercises / audio visual aids.
10. Calculation of allowance for a job.
11. Standard time calculation problems.
12. Problems of wage incentive.
13. Case study of an industrial/service organization using a method study techniques.
14. Stop watch time study of a job.
 Chhattisgarh Swami Vivekanand Technical University, Bhilai
Name of program: Bachelor of Engineering
Branch: Common to all branches Semester: VIII
Subject: Report Writing & Seminar Code: 337865(37)
Total Lab Periods: 24 Batch Size: 30
Maximum Marks: 40 Minimum Marks: 24

Unit -I
Introduction to Technical Writing
How differs from other types of written communication Purpose of technical writing, Correspondence:
prewriting, writing and rewriting Objectives of Technical Writing. Audience Recognition: High-tech audience,
Low tech audience, Lay audience, Multiple Audience.

Unit - II
Correspondence
Memos, Letters, E-mails, Its differentiation, types of letters, Document Design, its importance, Electronic
Communication: Internet, Intranet, extranet, Writing effective e-mail.

Unit - III
Summary
Report Strategies, Effective style of technical report writing: Structures: content, introduction, conclusions,
references, etc., Presentation, Writing first draft, revising first draft, diagrams,
graphs, tables, etc. report lay-out.

Unit -IV
Report Writing
Criteria for report writing, Types of Report: Trip report, Progress report, lab report, Feasibility report, project
report, incident report, etc. Case studies.

Unit -V
Proposals & Presentation
Title page, Cover letter, Table of Content, list of illustrations, summary, discussion, conclusion, references,
glossary, appendix, Case Studies. Oral Presentation/ Seminar:

Text Books:
1. Technical Writing Process & Product - Sharon J.Gerson & Steven M. Gerson - Pearson.
2. Business Correspondence & Report Writing Sharma R C & Krishnamohan TMH
Reference Books:
1. Communication Skills for Engineers - Sunita Mishra - Pearson Education
2. Communication for engineering students - Longman
3. Effective Technical Communication Eisenbergm- McGraw Hill.
4. Technical Writing & Professional Communication for Non Native Speakers of English Huckin T N &
Olsen L A Mcgraw Hill
5. Academic Writing: A Guide For Management Students And Researchers - Monippally M M and Pawar B
S Response Books,New Delhi.