Design Calculation For Gate
Uploaded by
Joe NadakkalanDesign Calculation For Gate
Uploaded by
Joe NadakkalanPROJECT:TOWNSQUAREMULTIUTILITYPUMPING
STATION
DesignBy:JOE Date:26JAN2017
Title:DesignCalculationReportof
CHAIN LINK FENCE GATE Chkdby:BKJ Rev.No.:00
Following calculations are presented to check structural stability of proposed double gate system.
Following calculations are presented to check structural stability of proposed chain link mesh
fence system .
1. Ref Drawing :
LME Drg # TSP5-KDL-C1046-S-SHD-IP-0401Dt. 26-01-2017 Rev 0
TSP5-KDL-C1046-S-SHD-IP-0401Dt. 26-01-2017 Rev 0
"CHAIN LINK FENCE GATE ,DETAILS"
2. Ref code : BS 5950-1:2000 Structural steel
: ASCE7-05 American code : Wind speed = 160 kmph = 44.4 m/s , exposure B
3. Design datas ; Wind speed 160 kmph = 44.44 m/s
Coeff of passive earth pressure kp = 3.33
unit wt of soil 19 kN/m3
SBC of soil = 100 kN/m2
Properties of MS Pipes
OD Thickness C/S Area Self wt Sec. Mod Z Height
mm mm mm kg/m mm m
219 7.1 4724 37.1 242418 2.1 Gate Post
73 5.6 1185 9.3 18565 16.5 Frame
48.3 3.68 516 4.0 5349 Brace.
Self wt of chain link mesh 50x50x2.5 /3.55 mm coated = 3.1 kg/m
Analysis and Design of Gate system:
System is as below;
Structure Checked for stability and reactions
Vertical forces on the base of the gate post.
chain link (4395 m x 2.1 m area )= 3.1 kg/m2 x4.395 x 2.1 = 0.29 kN gate leaf wt kN =2.50
gate frame =(3x 4.315 + 4 x1)x9.3 kg/m= 2.01 kN
10 mm dia rod gate brace =1.6 x 6no.s x 0.6kg/m = 0.06 kN
Accessories 0.15 kN
Total 2.50 kN
Wind load calculation :
basic wind speed V = 44.44 m/s
design wind speed Vs = S1.S2.S3.V
= 1 x 0.6 x 1 x 44.44 S2= 0.6 upto 5 m ht. Category 3C .. table 3
= 26.66 m/s of CP3 code
2
dynamic pressure q = 0.613 x Vs
= 0.613 x 26.662
= 436 N/mm = 0.44 kN/m
shape factor Cp= 1.2
blockage due to weld mesh = 14.2 % ( 50x50 mesh, I.e.40 wires of 1 m length of 3.55 mm coated dia)
= 40x1x0.00355= 0.142 m2 /m area)
Consider 25%
consider 25% for calculation purpose including braces and frame area. w=1.59 kN
force on gate post =Cf.q.( Influence length x 25% + pipe dia) 2.2m
= 1.2 x 0.44 ( (4.4/2+1.25) x 0.25 + 0.3) 4.395 m
= 0.61 kN/m
0.52 kN/m
moment at base of concrete post due to wind load on gate = 0.61 x 2.22 / 2 2.1
point A = 1.35 kNm
moment due to gate leaf wt =wx2.2=2.5x2.2= 6.25 kNm
= 6.25 kNm
A GL
Total moment = 1.35+6.25 = = 7.60 kNm
( simple addition on safer side)
shear at base = 3.80 kN passive e.p.
Design moment for concrete Post = 1.2 x7.6 = 9.11 kNm
Design shear for concrete post = 1.2 x 3.8 = 4.56 kN
7 . Conclusion:
* Proposed 2.1 m high chain link gate system as proposed in the Link Middle East drawing is Safe
* Proposed 4 Number of hinges with 4no.s 18 dia CSK Anchor Bolt for Gate is safe
Page 1 of 1
