Scribd
Upload
361 views

8615 Nozzle Orientation Report 01

This dimensional report from Fact Engineering Works provides measurements for an aqueous film forming foam tank fabricated for BPCL-KR. It lists 9 dimensions measured from the fabrication drawing against the actual fabricated dimensions. All dimensions were found to be acceptable. A nozzle orientation report from Fact Engineering Works also provides orientation and measurement details for 2 nozzles and 1 manhole on an ammonia bullet fabricated for FACT - CD. The positions of markings on the bullet shell were found to be in line with the developed drawings. All dimensions and markings were found to be acceptable.

Uploaded by

Bsc Aditya Singh Dinkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
361 views

8615 Nozzle Orientation Report 01

This dimensional report from Fact Engineering Works provides measurements for an aqueous film forming foam tank fabricated for BPCL-KR. It lists 9 dimensions measured from the fabrication drawing against the actual fabricated dimensions. All dimensions were found to be acceptable. A nozzle orientation report from Fact Engineering Works also provides orientation and measurement details for 2 nozzles and 1 manhole on an ammonia bullet fabricated for FACT - CD. The positions of markings on the bullet shell were found to be in line with the developed drawings. All dimensions and markings were found to be acceptable.

Uploaded by

Bsc Aditya Singh Dinkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

FACT ENGINEERING WORKS (FEW)

FINAL DIMENSIONAL REPORT


Date : 12.02.2015

Client BPCL-KR Certificate No. 8509/FD/T1/01

PO No. 4504707993 dated 27.08.2014 Attachment To NA

FEW JO No. 8509/14

Description Fabrication and Supply of Aqueous Film Forming Foam Tank No. 1

Drawing No. 1515311 R1

Quantity 1 Nos.

Dimension (in mm)


S.No. Description
As per Drawing Actual
1 Outside Diameter 2610.00 2610.00
2 Overall Height of Tank including Cone 4000.00 4000.00
3 Man Hole Nozzle (N1) Stand Out 250.00 250.00
4 Outlet/Drain Nozzle (N2) Stand Out 150.00 145.00
5 Vent Nozzle (N3) Stand Out 150.00 148.00
6 Inlet Nozzle (N4) Stand Out 160.00 159.00
7 Stand Pipe Nozzle (N5B) Stand Out 150.00 147.00
8 Stand Pipe Nozzle (N5A) Stand Out 150.00 147.00
9 Over Flow Nozzle (N6) Stand Out 150.00 148.00

NOTE:

Remarks All Dimensions found acceptable.


FormNo. 6.51.06

FEW CEIL
(Engineer-in-Charge) (Authorised Representative)
Page 1 of 1
FACT ENGINEERING WORKS (FEW)
NOZZLE ORIENTATION REPORT
Date : 13.05.2015

Client FACT - CD Certificate No. 8615/NOR/01

PO No. 4800003678 dt.18.01.2013 Identification No. AB-1

FEW JO No. 8615/12

Description Ammonia Bullets for Barge

Drawing No. 1715253 R3; 8615/1,2 R3

S.No. Description Inspection Findings


1. Nozzle - N Orientation = 00, Major Dia. = 275mm, Minor Dia. = 273mm
Distance from Cirseam = 800mm (Position)
Longseam found at 900.
2. Manhole - M Orientation = 00, Major Dia. = 595mm, Minor Dia. = 587mm
Position = At the centre of the shell (longitudinally)
Longseam found at 900.

NOTE:Developed drawings marking on the shell found in line with the drawing.

Remarks All dimensions and marking found acceptable.


FormNo. 6.51.06

FEW IRS
(Engineer-in-Charge) (Authorised Representative)
Page 1 of 1

You might also like