Quality Function Deployment

Quality Function Deployment, or QFD, is a tool that can help improve your existing processes by focusing your energy
and your attention on efforts that will ensure the greatest result. QFD works by first identifying and prioritizing
customer requirements and expectations. You then can use this information to focus with greater confidence on the
important customer requirements as a starting place to define such things as product requirements, design features,
manufacturing processes or support requirements.

What can it do for you?

The payoff of a Quality Function Deployment is the creation of more robust designs and processes that work together to
assure customer satisfaction. An added benefit is that QFD is able to document key decisions in a form that can become
a template for future improvement efforts.

A full-blown application of the Quality Function Deployment discipline produces a complex-looking series of matrices.
In almost all instances, this level of detail is not necessary. Normally, an abbreviated version of QFD with only one or
two matrices is enough to do the job of resolving a problem, defining Critical-To-Quality (CTQs) characteristics or
implementing actions to reduce costs.

The effort and discipline of Quality Function Deployment produces the greatest results in situations in which customer
requirements have not or cannot be sharply defined, those requirements cannot be met through conventional processes
or practices, or the elements of the business that must work together to deliver the requirements have divergent or
conflicting goals.

Although Quality Function Deployment is a disciplined tool, it is also a flexible and adaptable one. Through QFD,
customer expectations can be logically and practically linked to almost any business process. Virtually any cause-and-
effect relationship can be adapted to the Quality Function Deployment discipline.

The application of QFD can range from one person constructing a simple matrix to classic Quality Function
Deployment in which a formal team generates a systematic flow down of customer expectations to technical
requirements, critical part requirements, critical process requirements, and process controls. The most practical
application of Quality Function Deployment is usually somewhere between these two strategies.

Quality Function Deployment is especially useful in Define, Measure and Improve phases of Lean Six Sigma
methodology.

How do you do it?

1. Define the project.

The first step is to define the project and describe the intended results. This will enable you to decide if Quality Function
Deployment is the right tool.
• If the approach is clear, but the requirements are not, or you want to clarify the link between customer
requirements and process requirements, a simplified Quality Function Deployment might be appropriate.
• If the objective is a significant challenge or there are many conflicting requirements, a more complex Quality
Function Deployment is probably a good idea.

2. Create the team.

The next step is to bring together a team.
• List the organizations that have an interest in or an influence on the result.
• Consolidate representation as necessary to get the list down to two or three for a simple Quality Function
Deployment or five to eight for a complex one.
• Identify team members who represent the defined areas and who would also have ownership for implementing
the results.
3. Get buy-in.
Make sure you have commitment from the proposed team members.
• If anyone is not interested, find a suitable replacement.
• Ensure you have the commitment of management in each of the interested areas, as well.
• Once the team is defined, agree on a team leader, team ground rules and a regular meeting schedule.

4. Define customer expectations.

Think of this as answering the question, “What does the customer want or need?”
• Generate your own ideas through brainstorming if direct customer involvement or surveys are impractical.
• Clearly state each expectation as a customer would perceive it.
• Group the expectations into
meaningful clusters that share
a common theme. Consider
creating an affinity diagram
with everyone’s input.
• Although each customer
expectation is important, it is
necessary to prioritize them to
help resolve any conflicts over
what to do first. Rate each
customer expectation from 1
to 5, with 1 being the least
important and 5 being the
most.
• Validate your collection of
customer expectations and
their relative importance by
talking with your customer or
sources close to your
customer. (Always remember,
a fundamental part of the QFD
discipline is to listen to the
voice of the customer.)
• When you are satisfied with
your list, transfer your rated
customer requirements to the
left side of your first matrix.

5. Define the requirements that will satisfy your customers’ expectations.

Think of this as answering the question, “How can we meet each customer expectation?”
• Work on each expectation, one at a time. Remember that you are looking for requirements that will cause the
customer’s expectations to be satisfied. (Alternately, you might use the discipline to show a customer why an
expectation cannot be met or to consider what may be possible beyond the customer’s expectation.)
• You could try brainstorming or create a cause-and-effect diagram to generate requirements.
• After you have a list of requirements, screen them until you have identified the critical few. Good requirements
for QFD are not only relevant; they are also controllable and measurable.

6. Develop the first relationship matrix.

This matrix will compare each customer expectation (the whats) against your list of identified product or service
requirements (the hows).
• To help decide if the customer would feel that the product or service expectation would be met if the
requirement were met, ask, “If we meet this product or service requirement, would the customer perceive this as
an improvement in satisfying this need or expectation?”
• If there would be a perceived improvement in satisfaction, decide if the relationship between meeting the
requirement and improving the customer’s satisfaction is a strong one, a moderate one or a weak one.
 • In your matrix, use a double circle to symbolize a strong relationship, a single circle for a moderate one, and a
triangle for a weak one.
• Complete the matrix for all the possible relationships. You should normally have at least one strong relationship
under each requirement. Determining the strength of a relationship is a team judgment.

Here are some tips to help calibrate that judgment to make the most useful matrix.
• Try to avoid making a matrix that contains mostly weak or moderate relationships.
• On the other hand, avoid making a matrix that shows every requirement related in some way to each customer
expectation.
• A good general rule is that only one-third to one-half of the intersections in the matrix should have symbols in
them.

7. Check your work.

A reality check is usually a good idea at this point. Ask if the customer would really be satisfied if you delivered a
product or service that met your list of requirements. Be sure that there are no obvious holes or underrated relationships.

8. Prioritize your requirements.

When you are satisfied that your matrix is complete and accurate, prioritize the requirements
• Multiply the strength of each relationship (1 for weak, 3 for moderate and 9 for strong) times the priority
number (1 to 5) for each corresponding customer expectation.
• Add the results and enter the sum for each requirement at the bottom of the matrix.
The numeric quantities have no real meaning, but they do help you to prioritize the relative importance that meeting
each of the identified requirements would have in satisfying the package of identified customer expectations.

9. Establish targets.
Through team discussion, develop target
values for the requirements. Take into
account whether the goal is to maximize
or minimize a value or condition or to
hit a specific target value.

Pay attention in this step to the effect

that optimizing one requirement has on
the ability of the process to meet the
other requirements.
• Completing the roof matrix that
gives the first matrix the name
house of quality is the way that
this is done in a formal QFD
study. The roof records
correlations between the
requirements.
• Symbols in the correlation
matrix respond to the question,
“Would meeting this
requirement help or hurt
meeting each of the other
requirements?”
• The roof matrix is constructed
and read diagonally. In our
house-of-quality example,
reducing weight has a strong
positive correlation with
reducing fuel burn and a strong
negative correlation with
increasing thrust.
 • For simpler QFD projects, formal correlation analysis may not be necessary. If the team wants to look at
correlations, it may be enough to compare the requirements against one another informally and note whether
optimizing one would compromise another.

10. Construct the next QFD matrix.

• The requirements output of the first matrix is usually used as the input to the second matrix. The relative
importance of each requirement from the previous matrix would be rescaled to fit in a 1 to 5 range to keep
calculations easy.
• Using the highest priority and most challenging requirements as a starting place, the team would generate a list
of design features to satisfy them.

The other requirements are not forgotten. They are often able to be handled by practices other than QFD, however. The
team must decide which are the most important for entry into the second matrix to keep the focus sharp.
• By completing and evaluating this second matrix in the same way as the team did the first one, they arrive at a
prioritized list of design features and Critical To Quality characteristics (CTQs). The matrix scoring helps keep
the focus tied to what is most important in ultimately satisfying the customer.
• In selecting those most important CTQs, it is helpful to ask, “Is this measurable, controllable and relevant?”
• A characteristic should be all three to be considered as a CTQ.

11. Construct the QFD series of matrices.

• Using the CTQs as the starting point for the next matrix, the team should apply their understanding of the
process to create a list of the process characteristics that must be controlled to reduce variation in the CTQs.
• Fill in the matrix using the same kind of weighting process as you used before. Ask, “If we reduce the variation
in this key control
characteristic (KCC),
will the customer
perceive this as an
improvement?” As
with CTQs, the
selected KCCs must
be measurable,
controllable and
relevant.
• Completion of this
matrix generates a list
of the important
process characteristics
(KCCs) that must
receive special
attention to ensure
that design features
(CTQs) are met.
• The classic form of Quality Function Deployment then converts the KCCs into a prioritized quality plan
(process controls) using a variation of the relationship matrix.

Now what?
Classic Quality Function Deployment can be time-consuming and may involve several teams or teams with shifting
membership as the Quality Function Deployment looks at different processes. In actual application, the QFD tool is
usually modified, simplified and individually targeted to improve a wide range of process challenges. Quality Function
Deployment is not limited to new products or services. It can be applied to the improvement of existing products,
services or processes as well as for resolving problems that affect both external and internal customers.

Here are some points to ponder about Quality Function Deployment:

• The process may look simple, but it requires a lot of effort.
• Many of the results look obvious, after they are written down.
• If you don’t experience some tough spots, you probably aren’t doing it right.
 • The charts are not the objective; they are only the tool for achieving the objective. Pleasing the end-user is the
real objective.
• It is important to use the Quality Function Deployment process to find ways to succeed in the eyes of the
customer, not to justify failing to live up to the customer’s expectations or needs.
Consider using Quality Function Deployment when risks are very high, such as situations involving safety or
large investment, and it is extremely important to do things right the first time.

You should also consider Quality Function Deployment if:

• Customers are not satisfied with your product or service.
• Your product demands an extensive development time.
• Your customers’ wants and needs tend to get lost in the complexity of your process.
• Communication has been difficult between the functions responsible for delivering the product or service to the
end user.
• The structure or logic for allocating resources is not clear.
• The challenges in satisfying customer requirements appear to be greater than the normal processes can handle.

It is a good idea to get help from your area’s Black Belt or Master Black Belt before starting a QFD process. If you
would like to read about QFD, a good book is “The Customer Driven Company: Managerial Perspectives on QFD” by
William E. Eureka and Nancy E. Ryan (ASI Press, Dearborn, MI, 1988.)

Steven Bonacorsi is a Senior Master Black Belt instructor and coach. Steven Bonacorsi has trained
hundreds of Master Black Belts, Black Belts, Green Belts, and Project Sponsors and Executive
Leaders in Lean Six Sigma DMAIC and Design for Lean Six Sigma process improvement
methodologies.

The AIT Group, Inc.

Steven Bonacorsi, Solution Provider
Lean Six Sigma Master Black Belt
3135 South Price Road, Suite 115
Chandler, AZ 85248-3549
Phone: +(1) 888.826.2484
E-mail: [email protected]
http://www.theaitgroup.com