Scribd
Upload
406 views

ABB REF610 Relay Commands

The document discusses user authorization levels and access rights for an REF601 relay device. It lists three user categories - Operator Level, Setting Level, and Admin Level - with different predefined rights. The Operator Level user can view menus, while the Setting Level and Admin Level users have additional editing rights for protection settings, COM board parameters, performing tests, and configuration. The default password key combinations to access each level are also provided.

Uploaded by

Rajesh Sawale
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
406 views

ABB REF610 Relay Commands

The document discusses user authorization levels and access rights for an REF601 relay device. It lists three user categories - Operator Level, Setting Level, and Admin Level - with different predefined rights. The Operator Level user can view menus, while the Setting Level and Admin Level users have additional editing rights for protection settings, COM board parameters, performing tests, and configuration. The default password key combinations to access each level are also provided.

Uploaded by

Rajesh Sawale
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1MDU07204-YN E Section 5

Use of LHMI

Key
Key Picture Description
Name

Used for discarding changed parameter


Escape/
value in edit mode, or for going back to main
Cancel
menu from any level of menu navigation.

Press key combination Up & Enter key


Reset
together to reset the relay from LHMI

Press key combination Enter & Escape key


Edit together to edit the relay parameter from
LHMI
Breaker Hotkey for providing Breaker Close
Close command.

Breaker Hotkey for providing Breaker Open


Open command.

5.1.4 Authorization
Within REF601 three user categories with predefined user rights are
provided.
During access of the main menu the selection of user category is handled
with an own password (two key combinations).
The rights per user category and their default password are listed in
following table:

Sr Features Operator Level Setting Level Admin Level


No. User User User
1 Menu viewing Yes Yes Yes

2 Protection settings - Yes Yes


editing
3 COM Board parameter - Yes Yes
editing
4 Perform test - Yes Yes
5 Relay Configuration - - Yes
editing
6 Password editing - - Yes
7 Password key Other than
combination Admin/setting
(Default combination) Back + Up Back + Down

REF601 35
Application Manual

You might also like