Scribd
Upload
110 views

Microblaze C Reference

This document provides a cheat sheet for Microblaze C programming including initialization of the platform library and GPIO, UART functions for printing and input/output, and Tcl commands for updating the bitstream and debugging programs. It lists the key libraries and functions for initializing the platform and GPIO, printing output with UART, and reading/writing discrete GPIO pins.

Uploaded by

amreshjha22
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
110 views

Microblaze C Reference

This document provides a cheat sheet for Microblaze C programming including initialization of the platform library and GPIO, UART functions for printing and input/output, and Tcl commands for updating the bitstream and debugging programs. It lists the key libraries and functions for initializing the platform and GPIO, printing output with UART, and reading/writing discrete GPIO pins.

Uploaded by

amreshjha22
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Microblaze C Cheat Sheet General Purpose I/O Tcl Console Commands

Get TCL commands source


Initialization/Platform ipcore dir/microblaze mcs setup.tcl
Platform library "platform.h" Update bitstream microblaze mcs data2mem
Parameters library "xparameters.h" workspace/sdk-program /
Initialize platform init platform()
Inputoutput library "xiomodule.h" Debug/sdk-program.elf
Clean up platform cleanup platform()
Input and output type. XIOModule gpiOrGpo 2013 Sren Nrgaard http://github.com/soerenbnoergaard.
UART Initialize GPIO XIOModule Initialize(&gpiOrGpo, Public domain.
UART I/O library <stdio.h> XPAR IOMODULE 0 DEVICE ID)
Print string print(s ) Start GPIO XIOModule Start(&gpiOrGpo )
Print number as hex putnum(n ) Read from GPI XIOModule DiscreteRead(&gpi,
Small printf function. xil printf("format ", arg 1 ,...) gpiNum )
Large printf function printf("format ", arg 1 ,...) Write data to GPO XIOModule DiscreteWrite(&gpo,
Large scanf function scanf("format ", &name 1 ,...) gpoNum, data )

You might also like