Scribd
Upload
44 views

TLE Project Plan: Submitted by

This document outlines a project plan to make an extension cord. The objectives are to make a good working extension cord and show how to do it. The materials needed are pliers, long nose pliers, side cutters, and a Phillips screwdriver. The procedure involves cutting the wire, stripping insulation, connecting wires to outlets and plugs, screwing everything together, and having a teacher check the finished product for safety. A bill of materials is included listing the convenience outlet, flat cord, male plug, and eyelet wire connectors along with their costs.

Uploaded by

Kate Austine Angeles
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
44 views

TLE Project Plan: Submitted by

This document outlines a project plan to make an extension cord. The objectives are to make a good working extension cord and show how to do it. The materials needed are pliers, long nose pliers, side cutters, and a Phillips screwdriver. The procedure involves cutting the wire, stripping insulation, connecting wires to outlets and plugs, screwing everything together, and having a teacher check the finished product for safety. A bill of materials is included listing the convenience outlet, flat cord, male plug, and eyelet wire connectors along with their costs.

Uploaded by

Kate Austine Angeles
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 12

TLE

PROJECT
PLAN

SUBMITTED BY:
JEROME AMAGAN
Objectives
To do a good
condition extension
cord

To make use of it.

To show how to do a
good and working
extension cord.
To show the materials
in making an
extension cord
MATERIALS
I. Pliers
II. Long nose pliers
III. Side cutting
IV. Phillips screw
driver
NARATIVE
I was so happy just by
knowing that we would build
an extension cord because I
like the feeling that i can
make a thing into a
something, even though at
first stripping the cord may
seem hard I still have that
passion to succeed in making
this extension cord and I was
so ecstatic when I Finished the
task and when i was informed
that i was the second one who
finished the extension cord.

PROCEDURE
I. Cut the wire in half with
the side cutting.

II. Remove the rubber


surrounding the copper
wire.

III. Unscrew the cover of


the outlet.
IV. Once opened unscrew
the insulators and then
connect the copper
wire to the insulator
and then tighten the
screws.

V. Get your wood and


then screw the outlet
to the wood make sure
its tighten.

VI. Get your cover and


then tighten the screws
VII. Get the male plug and
then lift the cover and
then unscrew the
insulators and connect
the copper wires to
the insulator make
sure that the copper
wire wont hit the plug
cause it will short

VIII. Cover it up and then


make your teacher
check everything to
make sure its not
going to short
Final
product
Extensio
n
Cord
QTY. UNIT DESCRIPTION UNIT TOTAL
COST COST
CONVENIENCE P P 40.00
1
PC.
OUTLET 40.00
METERS FLAT CORD P P 36.00
3 #18 12.00

MALE PLUG P P 15.00


1
PC.
15.00
EYELET WIRE P P 3.00
2
PCS.
CONNECTORS 1.50
TOTAL COST OF MATERIALS P 94.00
+LABO (30%)OF OF P 28.00
R COST MATERIALS
SELLING P122.0
COST 0
Bill of Materials

You might also like