Scribd
Upload
107 views2 pages

Wire Sling Lifting Capacity Calculation For Jamtara Bypass Rob Km255/12 (GKCPL)

The document contains calculations of the safe lifting capacity of wire slings for two different bridge projects. For the Jamtara bypass ROB KM255 project: The max load to be lifted is 40MT. With 4 wires each at a 40 degree inclination, the load per wire is 13.05MT. The wires are 40mm diameter with a minimum breaking force of 829KN. With a safety factor of 6, the safe lifting capacity is calculated to be 14.084MT. For the Dumka ROB CH 3.562KM project: The max load is 58MT. With 4 wires each at a 30 degree inclination, the load per wire is 16.74MT. The wires are 48mm

Uploaded by

Anonymous sfkedkym
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
107 views2 pages

Wire Sling Lifting Capacity Calculation For Jamtara Bypass Rob Km255/12 (GKCPL)

The document contains calculations of the safe lifting capacity of wire slings for two different bridge projects. For the Jamtara bypass ROB KM255 project: The max load to be lifted is 40MT. With 4 wires each at a 40 degree inclination, the load per wire is 13.05MT. The wires are 40mm diameter with a minimum breaking force of 829KN. With a safety factor of 6, the safe lifting capacity is calculated to be 14.084MT. For the Dumka ROB CH 3.562KM project: The max load is 58MT. With 4 wires each at a 30 degree inclination, the load per wire is 16.74MT. The wires are 48mm

Uploaded by

Anonymous sfkedkym
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

WIRE SLING LIFTING CAPACITY CALCULATION FOR JAMTARA BYPASS ROB KM255

Max Load to be Lifted


No of Wire rope
Degree of Inclination
Load on each wire rope due to inclination angle 40/4/cos40

Diameter of wire rope provided


Fibre core-6x36 construction-1570 Grade
Minimum Breaking force of 40 diameter wire rope as per IS2266
Fector of safety
Safe Lifting Capacity of wire rope 741/6/9.81

WIRE SLING LIFTING CAPACITY CALCULATION FOR DUMKA ROB CH. 3.562KM
Max Load to be Lifted
No of Wire rope
Degree of Inclination
Load on each wire rope due to inclination angle 58/4/cos30

Diameter of wire rope provided


Fibre core-6x36 construction-1570 Grade
Minimum Breaking force of 48 diameter wire rope as per IS2266
Fector of safety
Safe Lifting Capacity of wire rope 1401/6/9.81
YPASS ROB KM255/12 (GKCPL)
= 40 MT
= 4 nos
= 40 deg
= 13.05 MT

= 40 mm

= 829 KN
= 6
= 14.084 MT
Hence safe

ROB CH. 3.562KM(RAMKY)


= 58 MT
= 4 nos
= 30 deg
= 16.74 MT

= 48 mm

= 1193 KN
= 6
= 20.268 MT
Hence safe

You might also like