Scribd
Upload
67 views

Data Sheet 10 MP 8002

This document provides data on a 470 kW, 6600 V, 50 Hz, 3-phase BFW pump motor including: - Rated output power, voltage, frequency, and phases. - Cooling method, area classification, installation type, and ambient temperature ranges. - Starting method, duty type, insulation class, and direction of rotation. - Manufacturer and type details, winding connection, temperature rises, speeds, currents, and thermal time constants. - Bearing types, lubrication, weights, terminal sizes, and vibration/noise limits. - Intended use for driving a machine and required motor parameters.

Uploaded by

Nguyễn Văn Hưng
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
67 views

Data Sheet 10 MP 8002

This document provides data on a 470 kW, 6600 V, 50 Hz, 3-phase BFW pump motor including: - Rated output power, voltage, frequency, and phases. - Cooling method, area classification, installation type, and ambient temperature ranges. - Starting method, duty type, insulation class, and direction of rotation. - Manufacturer and type details, winding connection, temperature rises, speeds, currents, and thermal time constants. - Bearing types, lubrication, weights, terminal sizes, and vibration/noise limits. - Intended use for driving a machine and required motor parameters.

Uploaded by

Nguyễn Văn Hưng
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

STT DATA SHEET

1 10-MP-8002 HP BFW PUMP MOTOR


TN NG C
2 GENERAL REQUIREMENTS
3 Rated Output/ Poles number 470 kW
4 Voltage/Frequency/Phases 6600 V
5 Neutral Status of power supply/PE conductor GROUNDED THROUGH RESISTANCE
6 Construction Arrangement IM1001
7 Cooling Method /Protection Degree IC611 (CACA)
8 Area Classification/Temperature Class safe area
9 Supply Specification/Construction Codes 2098-00-JSS-1692.01
10 Installation/Ambient Type OUTDOOR
11 Ambient Design Temperature Max: 40 C
12 Altitude/Relative Humidity a.s.l.: 6 m
13 Starting Method DIRECT ON LINE
14 Starting Sequence/Duty Type 3(from cold)/ 2(from hot)
15 Min.Insulation Class/Max Temperature Rise CLASS F
16 Direction of Rotation (looking at motor coupling) CW
17 Space Heater Rating/Voltage/Phases 80 W
18 Temperature Detectors Type/Quantity PT100
19 Position of Main Terminal Box RIGHT SIDE LOOKING FROM DRIVE EN
20 Terminal Box SC Withstand Current/Time 40 kA
21 Cable Type and Size M:
22 MOTOR MANUFACTURER'S DATA
23 Manufacturer/Type/Frame Size
ABB Industria
24 Winding Connection/Terminals STAR
25 Insulation Class F
26 Temperature Rise Rotor: 70 K
27 Full Load Speed 2979 RPM
28 Full Load Current/Locked Rotor Current 49 A
29 Starting Time (% of Voltage) 100%: 3 s
30 Allowable Locked Rotor Time Cold: 17 s
31 Thermal Time Constant Heating : 25 min / Cooling (motor at standstill) : 70 min
32 Efficiency
33 Power Factor
34 Locked Rotor Power Factor
35 Rated Torque
36 Locked/Pull Up/Breakdown Torque
37 Rotor Motor Inertia (WR2)
38 Bearing Type(Drive End/Non Drive End)
39 Lubrication Type/Interval
40 Outline Drawing/Cooling Type
41 Motor Weight (Stator/Rotor/Overall) (1)
42 Terminal Box Threaded Size (2)
43 Finish Color
44 Vibration Limit
45 Noise Level at 1 m
46 DRIVEN MACHINE DATA
47 Manufacturer/Machine Type
48 Coupling Type
49 Trust Up/Down
50 Rotor Driven Machine Inertia (WR2)
51 Starting Torque/Rated Torque
52 Required Motor End Play
53
54
55 (1) PRELIMINARY
56
57
58
OR

N 2
50 Hz N:3
DISTRIBUTED
IM1001
IP55

IEC
DUSTY, CORROSIVE, AMMONIA/UREA
Min: 15 C
99%
DIRECT ON LINE
S1
80 K (CLASS B)
CW
230V N: 1
N: 6 Stator winding
LOOKING FROM DRIVE END
0,25 s
HTR: RTD:
TA

Asynchronous motoAMA400M2ABAM
N: 3
F
Stator: 80 K
2979 RPM
guar 550%(IEC tol)/tested :543.2%
80%: 9 s
Hot: 12 s
or at standstill) : 70 min

You might also like