Scribd
Upload
237 views

S355J2G3 PDF

This document provides information on S355J2G3 steel, including: - The chemical composition limits for the steel. - The equivalent grades in other standards like EN, ASTM, JIS. - The available product forms like hot rolled bars and wire rod, forged bars, peeled bars, and forged turned bars. - The applicable tolerances, heat treatments, and surface defect standards for each product form. - That other products like squares, flats, and billets are also available. - That the mill test certificate will include chemical composition, mechanical properties, and testing results per EN 10204/3.1.

Uploaded by

soryn_25
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
237 views

S355J2G3 PDF

This document provides information on S355J2G3 steel, including: - The chemical composition limits for the steel. - The equivalent grades in other standards like EN, ASTM, JIS. - The available product forms like hot rolled bars and wire rod, forged bars, peeled bars, and forged turned bars. - The applicable tolerances, heat treatments, and surface defect standards for each product form. - That other products like squares, flats, and billets are also available. - That the mill test certificate will include chemical composition, mechanical properties, and testing results per EN 10204/3.1.

Uploaded by

soryn_25
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

S355J2G3

W.Nr. 1.0570

General size range 5,5 1000 mm

Chemical composition C=max.0,20* Si=max.0,55 Mn=max.1,60 P=max.0,035 S=max.0,035


Cr=max.0,30 Al=min.0,020 Cu=max.0,30 Ceq=max.0,45** Ni=max.0,30

*C=max.0,22% for sizes over 40 mm


**Ceq=max.0,47% for sizes 40-150 mm, Ceq=max.0,49% sizes over 150 mm

Grade equivalents 50D 15Mn E36-3 SM 490 11523


Similar grades BS GB AFNOR JIS CSN
1024 Fe 510 2132 17GS
SAE UNI SS GOST

Hot rolled 5,532 mm Tolerances DIN 59110 or specific tol.


wire rod Coils min. 1,5 tons or specific weights
Heat treatment +AR
Surface defects for cold drawing

Hot rolled 16310 mm Tolerances EN 10060 or +/- 1,3% of dN or specific tol.


bars Lengths 6 m +200/-0 mm or 36m or specific lengths
Heat treatment +AR EN 10025 or +N EN 10025
Surface defects EN 10221/B or max. 1,5% or specific value
US test SEP 1921 3C/c or EN 10308 or specific FBH eq.

Forged black 2501000 mm Tolerances DIN 7527/6 or specific tol.


Lengths 36m or specific lengths
Heat treatment +N EN 10250-2
Surface defects max. the tol. or specific depth
US test SEP 1921 3C/c or specific FBH eq.

Peeled 16100 mm Tolerances EN 10278 h9 or EN 10278 h11 or specific tol.


Lengths 6 m +200/-0 mm or specific lengths
Heat treatment +AR h9/ h11 or +N h9/ h11
Surface defects max. 0,2 mm or specific depth
US test SEP 1921 3C/c or specific FBH eq.

Forged turned 250850 mm Tolerances +3/-0 mm or +4/-0 mm or +5/-0 mm or


Lengths 36m or specific lengths
Heat treatment +N EN 10250-2
Surface defects technically free or specific depth
US test SEP 1921 3C/c or specific FBH eq.

Other available products squares- flats-hexagons rolled, rounds-squares-flats-hexagons cold drawn, squares-flats forged,
squares- flats forged and milled, square billets rolled, square billets CC cast

Mills test certificate EN 10204/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing

- supply range file - issued: 20.02.2009 rev. 1

Interfer Edelstahl Handelsgesellschaft mbH, Wachhausstr. 5c, 76227 Karlsruhe, Germany


Tel.+49 721 94397- 44 Fax.+49 721 94397 - 77 [email protected] www.interfer.de

You might also like