SET UP AND

OPERATION GUIDE

SET-UP AND OPERATION GUIDE

Version 1.6.19
December 2014

KYOCERA Document Solutions Europe

22.12.2014 1 | 36
Contents
Introduction ................................................................................................................................................... 4
Whats New? ............................................................................................................................................. 4
New in SmartScan 1.6.19 ..................................................................................................................... 4
New in SmartScan 1.6........................................................................................................................... 4
New in SmartScan 1.5........................................................................................................................... 5
Part 1: Administration ................................................................................................................................... 6
Installation ................................................................................................................................................. 6
Installation of the pkg file ....................................................................................................................... 6
Updating the application ........................................................................................................................ 6
Trial period and activation ......................................................................................................................... 7
Activation ............................................................................................................................................... 7
Supported Devices .................................................................................................................................... 7
Setting as default application .................................................................................................................... 8
Removing SmartScan from the device ..................................................................................................... 8
Setting up SmartScan: Administrator Settings........................................................................................ 10
Application Settings Main Screen .................................................................................................... 11
Application Settings Default Screen / Settings ................................................................................. 11
Defining the default start screen ......................................................................................................... 11
Changing the administrator code ........................................................................................................ 12
Scan Settings ...................................................................................................................................... 12
Defining the default scan settings ....................................................................................................... 12
Defining default document name ........................................................................................................ 13
Address Book Settings ........................................................................................................................ 13
Local address book ............................................................................................................................. 13
External address book (3 step configuration) ..................................................................................... 14
Determining LDAP Settings ................................................................................................................ 15
Destination Settings ............................................................................................................................ 17
Defining default fax settings (prefix, suffix) ......................................................................................... 17
Defining default e-mail settings ........................................................................................................... 18
Shared Folder ...................................................................................................................................... 18
Home Folder ........................................................................................................................................ 18
Configuration for Scan to DFS ............................................................................................................ 22
User defined DFS Root ....................................................................................................................... 23
Configuration for Scan to WebDAV..................................................................................................... 25
Remote Configuration via Command Center .......................................................................................... 26
22.12.2014 2 | 36
 FAQs and Known Issues ........................................................................................................................ 27
When I try to activate SmartScan, I receive an activation error message. ......................................... 27
How can I log in to SmartScan for Scan2Me and Scan to folder? ...................................................... 27
I cannot access the address book, where do I find it? ........................................................................ 27
FAQs for DFS support ......................................................................................................................... 27
FAQs for Home Directory .................................................................................................................... 28
FAQs for Browser Problems ............................................................................................................... 28
Part 2: Usage .............................................................................................................................................. 29
Using SmartScan .................................................................................................................................... 29
The User Interface .................................................................................................................................. 29
Sending a fax ...................................................................................................................................... 31
Sending an e-mail ............................................................................................................................... 31
Scan to me .......................................................................................................................................... 32
Scan to Folder ..................................................................................................................................... 33
Scan to Home Folder .......................................................................................................................... 33
Scan to DFS folder .............................................................................................................................. 34
Scan to WebDAV folder ...................................................................................................................... 34
The Address Book ............................................................................................................................... 36

22.12.2014 3 | 36
Introduction

SmartScan is the complete scan center for your MFP. With just the touch of a button on the panel, users
can scan to an e-mail address they either select from the address book or enter on the touchscreen, or
scan to a predefined folder on the network. Logged in users have the added convenience to scan to their
personal e-mail address or home folder with just one click.

Using the fax function, SmartScan operates like a regular fax machine. Users only have to enter the fax
number or select it from the address book. Additional fax cards or cables are unnecessary, and there are
no monthly costs for the devices as all faxes are sent through the fax server.

SmartScan also greatly simplifies the changing of file format, page size, resolution, duplex or simplex
and other scan settings, making scanning easy and fast for everyone.

Whats New?
New in SmartScan 1.6.19

- Scan to WebDAV
- Individual default scan settings can be defined per function (Fax, Email, ..)
- Administrator can store settings on a USB stick, to copy them to other devices
- FaxHub support implemented
- Bug fixed in Mail2Me (400x400 dpi was reported as invalid scan setting)

New in SmartScan 1.6

- Support for new scan settings, e.g. continuous scan on/off, rotation of scans (orientation)
- Possibility to change the admin code (inside admin settings)
- Admin can define whether the user shall be allowed to change the scan settings in the various
screens
- The admin settings are now structured for better orientation and faster navigation

22.12.2014 4 | 36
New in SmartScan 1.5

Version 1.5 is a major update containing several new features implemented on user request, as well as
support for latest models.

- Scan to DFS folder

(This functionality is not supported by all devices, please see the Supported devices section for
more details.)
- Users SMB Home Directory can be read from Active Directory / LDAP
- Remote configuration of the SmartScan Admin settings from the Command Center

22.12.2014 5 | 36
Part 1: Administration

This section describes how to install and set up the application. It is relevant for administrators and
service technicians.

Installation

SmartScan 1.5.pk: Supports all devices, without Scan to DFS folder functionality

SmartScan 1.6.19.pkg: Includes Scan to DFS folder functionality, but does not run on the following
devices (legacy devices):
TASKalfa 250ci
TASKalfa 300ci
TASKalfa 400ci
TASKalfa 500ci
TASKalfa 552ci
TASKalfa 300i
TASKalfa 420i
TASKalfa 520i

Installation of the pkg file

Copy the relevant pkg file to the root folder of an empty USB flash drive.
Note that the USB flash drive needs to be compatible with the requirements of the device.

Open the System Menu, scroll to the next page and press the Application button. If prompted to
authenticate, login with an administrator account. The application screen will list all applications
currently installed on the MFP.

Press the Add button to open the Application-Add screen. Then insert the USB flash drive into the
USB slot at the side of the panel. Within a few seconds, the MFP will display SmartScan in the list
of applications found on the USB flash drive.

Select SmartScan and press the Install button. When prompted to confirm, press Yes. The MFP
will confirm that the application installed correctly.

Then, press the Remove Memory button. After the MFP confirms that it is safe to remove the
USB memory device, remove it from the MFP.

Press the Close button to exit back to the Application page.

Select SmartScan and press the Activate button. When prompted to confirm activation, press the
Yes button.

Updating the application

In case you want to update to a newer version, please proceed as follows:

Open the System Menu, scroll to the next page and press the Application button. If prompted to
authenticate, login with an administrator account. The application screen will list all applications

22.12.2014 6 | 36
 currently installed on the MFP.

Press the Add button to open the Application-Add screen. Then insert the USB flash drive into the
USB slot at the side of the panel. Within a few seconds, the MFP will display SmartScan in the list
of applications found on the USB flash drive.

Select SmartScan and press the Update button. When prompted to confirm, press Yes. The MFP
will confirm that the application updated correctly.

Then, press the Remove Memory button. After the MFP confirms that it is safe to remove the
USB memory device, remove it from the MFP.

Press the Close button to exit back to the Application page.

Trial period and activation

A license for SmartScan needs to be purchased per device. For testing purposes, a trial period is
available.
Available Days: 30
Trial Count: 3
After expiration of trial period, activation is required.

Activation
Login as administrator
Open the System Menu

nd
Select Application (2 page of System Menu)
Select SmartScan
Select Activate
Enter License Number and select 'Run'
(You can also select Trial)
Turn off/on device

Supported Devices

SmartScan supports all HyPAS enabled and HyPAS capable devices.

HyPAS-Enabled MFPs HyPAS-Capable MFPs*

Colour MFPs Colour MFPs*

TASKalfa 7551ci TASKalfa 266ci

TASKalfa 7550ci TASKalfa 265ci
TASKalfa 6551ci ECOSYS M6526cidn
TASKalfa 6550ci ECOSYS M6026cidn
TASKalfa 5551ci FS-C8525MFP
TASKalfa 5550ci FS-C8520MFP
TASKalfa 4551ci FS-C2626MFP
TASKalfa 4550ci FS-C2526MFP
TASKalfa 3551ci
TASKalfa 3550ci
TASKalfa 3051ci B&W MFPs*
TASKalfa 3050ci
22.12.2014 7 | 36
 TASKalfa 2551ci
TASKalfa 2550ci FS-6525MFP
TASKalfa 552ci

FS-6530MFP
TASKalfa 500ci

FS-3640MFP
TASKalfa 400ci

FS-3540MFP
TASKalfa 300ci

ECOSYS M3560idn
TASKalfa 250ci

ECOSYS M3550idn
ECOSYS M3540idn
B&W MFPs ECOSYS M3040idn

TASKalfa 8001i
TASKalfa 8000i
TASKalfa 6501i
TASKalfa 6500i
TASKalfa 5501i
TASKalfa 5500i
TASKalfa 4501i
TASKalfa 4500i
TASKalfa 3510i
TASKalfa 3501i
TASKalfa 3500i
TASKalfa 3010i


TASKalfa 520i


TASKalfa 420i


TASKalfa 300i

* HyPAS capable devices do not have an integrated hard disc and require an external memory card (CF
or SD Card according to the device specifications) to execute HyPAS applications.

Devices do not support Scan to DFS functionality. They require installation of the SmartScan.pkg file
SmartScan-DFS.pkg will not work on these devices.

Setting as default application

SmartScan can be set up as default application on the device. This means it is displayed as default on
the panel when the device is switched on.

Login as administrator
Open the Common Settings
Select Default Screen
Click Change
Select SmartScan from the list of applications and click OK
Log out

Removing SmartScan from the device

Removing or deactivating the application should be done by your authorized KYOCERA service
technician.

Open the System Menu, scroll to the next page and press the Application button. If prompted to
authenticate, login with an administrator account. The application screen will list all applications
currently installed on the MFP.
22.12.2014 8 | 36
 Select the application SmartScan.

Press the Deactivate button in order to deactivate the Application.

Press the Delete button to remove the Application.

22.12.2014 9 | 36
Setting up SmartScan: Administrator Settings

When SmartScan is started for the first time, the settings pages will automatically open and you can
perform all required settings.

To define or change the administrator settings later, you can always access the administrator settings
from within the application.

Start SmartScan
Press the key combination (administrator code) 23646
The admin settings will open.

By entering the administrator code, the settings can be accessed. Here the administrator can define the
parameters for the application functions.

Setting the Fax, E-mail, Folder or Send To Me function as default.

Defining default values (prefix, suffix and separators) for e-mail and fax
Deciding whether prefix, suffix and separators should be visible to the end user (shown)
Deciding whether default values can be changed by the end user (writable)
Defining LDAP or Active Directory for address book
Getting access to the Home Directory of the user via AD / LDAP
Specifying the LDAP or Active Directory parameters

o Host address of the LDAP or Active Directory server

o Port of LDAP or Active Directory server
o Base DN of Active Directory tree
o User DN and password that will handle LDAP lookups

22.12.2014 10 | 36
Application Settings Main Screen

The administrator settings have been structure to allow an easier and faster navigation through the
menus.

Application Settings Default Screen / Settings

Defining the default start screen

Click the function that should be shown by default upon start of the application.

22.12.2014 11 | 36
Changing the administrator code

Here you can change the default access code for the administrator settings.

Scan Settings

Defining the default scan settings

The scan settings can be opened from the main interface. In this administrator screen you can define the
default scan settings.
22.12.2014 12 | 36
Defining default document name

Enter the default file name that should be automatically entered when scanning.

Address Book Settings

Local address book

Check the box if you want to use the local address book, and determine whether you want to use only e-
mail address book entries.

22.12.2014 13 | 36
External address book (3 step configuration)

In the external address book configuration the administrator can specify the LDAP settings that are used
for the address book. In the first step, the LDAP settings (address, port and search base) have to be
entered. In the second step, the user DN (distinguished name) has to be entered.

22.12.2014 14 | 36
The LDAP field displayName will be used from the application automatically to show the names of the
different persons in the address book.

Now the administrator has to define the second required LDAP field. If the administrator selects for
instance the LDAP field mail as destination, the user will get as destination the value the from the LDAP
field mail when he selects an entry from the address book.

LDAP field displayName LDAP field mail

(user name) (destination)
User1 [email protected]
User2 [email protected]

Likewise, if the administrator selects the LDAP field faxID as destination, the fax number of the person
selected from the address book will automatically be entered as destination.

LDAP field displayName LDAP field faxID

(user name) (destination)
User1 4711
User2 4712

Determining LDAP Settings

An LDAP browser can be helpful to determine the LDAP settings e.g. the Base DN of your LDAP / Active
Directory tree.

22.12.2014 15 | 36
22.12.2014 16 | 36
Destination Settings

Defining default fax settings (prefix, suffix)

Enter your fax server settings like prefix and suffix for sending faxes.

22.12.2014 17 | 36
Defining default e-mail settings

Enter the fax server settings like prefix and suffix for sending e-mails.

Shared Folder

Enter the settings like host IP address, path login name and password for the shared folder. This folder
will be used as default folder for scan to folder.

Home Folder

22.12.2014 18 | 36
The administrator can select whether the home directory should be taken from the AD / LDAP, or defined
by SMB Server Host Name and User Name. Check the desired option.

Home Directory from AD / LDAP

Requirements:
The additional Home Directory attribute of each user must contain the path of the users Home
Directory.
The Home Directory must be a SMB directory.

22.12.2014 19 | 36
Below you find a sample configuration.

22.12.2014 20 | 36
Home Directory by User Name

If the administrator selects the option to take the users home directory by user name, he can define the
host address and he can allow the user to modify their home directory.

Requirements:

A folder of for each user must exist on the server (Home Folder).
E.g. c:\Users\User1

The home folder of the user on the server must be a shared folder (SMB shared). The shared
folder should have per default the name of the user.

22.12.2014 21 | 36
Therefore the syntax of the shared folder of each user is per default:
\\[Server Name]\[User Name]

Example:
Server name: 10.189.9.49
User name: User1
Shared folder: \\10.189.9.49\User1

If a user wants to scan to his home folder for the first time with SmartScan, they have to enter their
normal password. After that, the user can scan to his home folder without entering the password.
Further the user can modify his home folder if allowed by the administrator, but only if the currently saved
SMB access parameters are not a valid combination.

Important note for Administrators: If the share name is different from the user name, please make sure to
check the option "Allow to modify users home path".

The users credentials will be encrypted. If the users password changes, he has to re-enter it.

Configuration for Scan to DFS

The administrator is able to define three DFS root access folders that will be shown on the user interface.
These DFS roots can be used as public shared folders.

Note: Please use the fully qualified host name and the fully qualified domain name.

22.12.2014 22 | 36
User defined DFS Root

If the user selects the button labelled User Defined in the interface, he is able to define his personal
DFS root access. The access data will be stored by the application, and if the user accesses the folder
again, he does not have to re-enter the access data.

In case of Network - , Local - or HyPAS Expansion Authentication the application remembers the
complete user login parameter. If no authentication is implemented, the application remembers the last
defined DFS root access except the password.

Note: Please use the fully qualified host name and the fully qualified domain name.

22.12.2014 23 | 36
If the user selects one root directory and steps into the desired subdirectory, he is able to scan to this
directory.

22.12.2014 24 | 36
Configuration for Scan to WebDAV

The administrator can configure the WebDAV root folders after pressing the Destination Settings button in
the Application Settings.

The administrator can define the root folder as a WebDAV folder by clicking the respective checkbox on
the right. Here he can also specify whether SSL should be used for secure data transfer.
In the entry fields, the full host name and the full domain name must be entered. Also it is important to
check whether MFP device time and the server time are synchronized otherwise the authentication
could fail. By clicking the Test button, access to the WebDAV directory can be simulated.

22.12.2014 25 | 36
Limitations: WebDAV access is currently only confirmed with a Windows IIS server with Basic
Authentication.

Remote Configuration via Command Center

SmartScan supports remote configuration via Command Center.

In Command Center, click on HyPAS Device Online.

In the list of applications, click the Settings button next to SmartScan.

The same settings wizard will appear that is also shown on the device, and you can configure SmartScan
from the PC remotely instead of going to each device.

22.12.2014 26 | 36
FAQs and Known Issues

When I try to activate SmartScan, I receive an activation error message.

If you encounter any activation error message, please switch off and restart the device. This should clear
the message and enable you to activate SmartScan.

How can I log in to SmartScan for Scan2Me and Scan to folder?

There are different options to log in. Any option has to be set up by the administrator according to the
specifications for authentication. Please check the relevant sections of the user manual of the device.
You can use the local authentication to login at the device.
You can use network authentication
You can use a 3rd party application to login. This can be for instance the KYOCERA Login
Manager, or it can be an Accounting solution that offers login functionality. Depending on this
application, it will pass user data to SmartScan.

I cannot access the address book, where do I find it?

You have to configure the address book in the administrator settings. They are switched off by default.
Once the address books are configured, you can access them in the scan to e-mail or scan to fax menus.

FAQs for DFS support

Due to the devices specifications, certain requirements exist for DFS support.

22.12.2014 27 | 36
 Make sure that the MFP is a member of the domain where the DFS Server is running.

If it is not possible to place the MFP as a member of the domain where the DFS Server is
running, please use the FQDN Name to access the DFS server.

Example: server1.mydomain.local

FAQs for Home Directory

Known issue: When authentication at the MFP is turned off, you are not able to provide a user name or
SMB Home Dir for the Home Directory.

FAQs for Browser Problems

In case of any browser display options, e.g. in combination with remote configuration via Command
Center, we recommend either of the following:

Do not use the Compatibility View in Internet Explorer

Use Firefox as a browser

22.12.2014 28 | 36
Part 2: Usage

This section describes the usage of the application. It is relevant for end users.

Using SmartScan

If SmartScan is not set as default application and does not open automatically, it has to be started
manually.

Press the Application button. All applications currently installed on the MFP are listed.

Press the SmartScan logo in order to start the application.

SmartScan starts with the default screen.

The User Interface

On the top of the screen you will find the general status information and buttons for help file, settings and
exit.

Click here to access the help text. You will find always the help text that refers to the current page.

Click here to open the Settings.

22.12.2014 29 | 36
If you want to change any of the default settings, click the relevant button and confirm the change with
Save.

In the next settings screen, you have additional options, like changing density, image quality and
orientation, and you can activate or deactivate Continuous Scan.

Click here to exit the application.

On the bottom you will find the main function buttons. Click to access the function you want to use.

22.12.2014 30 | 36
The default page that opens when you start SmartScan is defined by the administrator in the settings.

Note that the Send To Me and Scan to Home Directory functions are only available when authentication
is activated on the device, and when the e-mail address and home directory of the user have been
correctly registered.

Sending a fax
You can use SmartScan like you would use a fax machine. To use the function, the settings of your fax
server need to be correctly defined by your administrator.

Click on the Fax button in the Function bar

Enter the fax number into the entry field
Insert the documents into the paper feeder and press the start button
The fax will be sent

Sending an e-mail

22.12.2014 31 | 36
 Click on the Email button in the Function bar
Enter the e-mail address into the entry field
Insert the documents into the paper feeder and press the start button
The e-mail will be sent

Scan to me
Authenticate at the device
Click on the 2Me button in the Function bar
Insert the documents into the paper feeder and press the start button
The e-mail will be sent to your e-mail address

Please note that this function is only available when authentication is activated on the device. The
authentication can be local, network, or extension authentication. The e-mail address of the user must be

22.12.2014 32 | 36
registered.

Scan to Folder

With the Scan to Folder button you can scan a document to a predefined folder in the network.
Click on the Folder button in the Function bar
Insert the documents into the paper feeder and press the Start button
The documents will be scanned into the predefined folder

Scan to Home Folder

The Users Home Directory will be taken from the LDAP or Active Directory. The Home Directory can also
be determined by the server settings defined by the administrator.

22.12.2014 33 | 36
When a user accesses this function for the first time, he has to enter his current network password. If he
uses the function afterwards, it will work without entering the password. Only when the user password
has changed, it has to be entered again.

The destination folder will be displayed in the box as destination folder.

Click on the Home Dir button in the Function bar

Insert the documents into the paper feeder and press the Start button
The documents will be scanned into the predefined folder

In case of Network - , Local - or HyPAS Expansion Authentication, the application remembers the
complete users Home Directory parameter.

If no authentication is implemented, the application remembers the last defined Home Directory except
the password.

Scan to DFS folder

After the User selects one of the DFS Roots (defined by administrator), he is able to navigate in the
different subdirectories. Additional the user is able to scan into a self-defined DFS root.

Scan to WebDAV folder

If a WebDAV folder is set up as a target, the user can scan into it by simply selecting the relevant button.

22.12.2014 34 | 36
The menu displays the folder with subdirectories and the user can navigate to the desired target folder,
and start the scan be clicking the start button.

22.12.2014 35 | 36
The Address Book

The address books (local and external) are only available in the fax and e-mail functions, and they have
to be activated and configured in the settings.
To access the relevant address book, tap the button External or Local.

Select an entry in order to define the e-mail / fax destination.

You can use the search function in order to find the required entry more quickly.

22.12.2014 36 | 36