Scribd
Upload
24 views

First Semester: Workshop Technology

The document outlines the laboratory experiments and tests conducted across 7 semesters of a civil engineering program. The experiments cover topics like workshop technology, construction materials, thermodynamics, strength of materials, fluid mechanics, hydraulics, concrete, soil mechanics, transportation engineering, water supply engineering, and sanitary engineering. Specific experiments include tensile tests, hardness tests, permeability tests, pump performance tests, and beam and column tests.

Uploaded by

DIMariaAUnited
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
24 views

First Semester: Workshop Technology

The document outlines the laboratory experiments and tests conducted across 7 semesters of a civil engineering program. The experiments cover topics like workshop technology, construction materials, thermodynamics, strength of materials, fluid mechanics, hydraulics, concrete, soil mechanics, transportation engineering, water supply engineering, and sanitary engineering. Specific experiments include tensile tests, hardness tests, permeability tests, pump performance tests, and beam and column tests.

Uploaded by

DIMariaAUnited
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

First semester

Workshop technology
1 Making of various components using fitting tools
2 Carryout various processes using various machine tools
3 Cut threads on the pipes and make various joints using various fittings
4 Carryout various bricklaying exercises using common hand tools
Construction Materials
1 Sieve analysis of clay, sand, gravel and crushed rock.
2 Hardness (Rockwell) tests on mild steel, alloy steel, aluminium alloy and
cast iron.
3 Toughness (Charpy) tests on mild steel, alloy steel, aluminum alloy and
cast iron.
4 Microstructure examination of mild steel, alloy steel, aluminium alloy,
cast iron and wood, using optical microscopes.
5 Tests to determine of linear coefficient of thermal expansion of
aluminum, steel, wood, lime mortar, asphalt concrete and synthetic
polymer
6 Setting time of cement.
7 Microstructure examination of clay, lime mortar, cements mortar, asphalt
concrete and one synthetic polymer.
Second semester
FUNDAMENTALS OF THERMODYNAMICS AND HEAT
1 Pressure and Temperature measurement
2 Experiment on compression and expansion of gases
3 Heat conduction and convection
4 Operation of refrigeration or heat pump
5 Performance of small I.- C engine
6 Experiment on Thermal radiation

Third semester

Strength of Materials
1 Tensile test of steel
2 Simple bending test on steel or timber beam
3 Torsion test on simple shaft
4 Test on column behavior and buckling
FLUID MECHANICS
1 Newton's Law of Viscosity.
2 Hydrostatic Forces on a Submerged Body.
3 Stability of a Floating Body.
4 Verification of Bernoulli's Theorem using Venturimeter
5 Impact of Flow Jet
6 Flow through Edged Orifice

Fourth Semester
Hydraulics
1 Reynoldss Experiment
2 Head Loss in a pipe line
3 Flow through open sluice gate
4 Hydraulic Jump in open channel
5 Flow over Broad-crested weir, Triangular Notch and Rectangular Notch
Theory of Structure-I
1 Influence lines for beams.
2 Analysis of plane frames.
3 Influence line for horizontal thrust in a three-hinged arch
4 Reaction on three-hinged arch under given system of loading.
5 Deflection of beam subjected to point load and uniformly distributed load.
6 Experimental analysis of suspension bridge.

Fifth Semester
Concrete Technology and Masonry Structures
1 Cube test

2 Brick Strength test


3 Design Mix
Soil Mechanics
1 Determination of Atterberg limit of soil.
2 Use of in situ density core cutter and the method of sand replacement.
3 Determination of optimum moisture content and maximum dry density.
4 Unconfined compression test
5 Direct shear test.
6 Constant head permeability test.
7 UU triaxial test.
Theory of Structure II
1 To obtain experimentally the influence line for the horizontal thrust in a two-
hinged arch.
2 To verify the Maxwell's Theorem of reciprocal deflection with the help of a
truss and two-hinged arch model.
3 Experimental analysis of a portal frame.
4 Experimental analysis of a continuous beam.

TRANSPORTATION ENGINEERING I
1 Los Angeles Abrasion value and crushing value of aggregates

2 Penetration value; Viscosity; softening point and ductility of bitumen


3 Skid resistance test on road surface
4 Marshall stability test and asphalt mix design
5 Extraction of bitumen from mix and gradation of aggregate after extraction

WATER SUPPLY ENGINEERING


1 Physical tests of water: temperature, color, turbidity, and PH.
2 Determination of suspended, dissolved and total solids in water.
3 Determination of dissolved oxygen in water by Winkler method and D.O.
meter.
4 Determination of optimum does of coagulant by the jar test.
5 Micro-biological test of water

Sixth Semester

Sanitary Engineering
1 BOD and COD tests.
2 Bacteriological: Membrin filter, most probable number.
Transportation Engineering II
1 Determination of CBR in the laboratory.
2 Measurement of spot speed and data analysis.
3 Measurement of deflection of pavement surface.
Seventh Semester

RCC
1 Test of RCC Beam in Pure Bending Failure (Record the Deflection
and Strains for Various Loads and Cracking Patterns)
2 Test of RCC Beam in Shear Failure
3 Test of Beam under Combined Bending and Shear Failure
4 Test on Bond
5 Investigate the Behaviour of Rectangular Beam with Double
Reinforcement
6 Investigate the Behaviour of Reinforced Concrete Column till
Failure
Hydropower
1 Performance Characteristics of a Pelton Turbine.
2 Performance Characteristics of a Francis Turbine.
3 Characteristics of Centrifugal Pump.
4 Characteristics of Reciprocating Pump.

You might also like