Scribd
Upload
655 views

Installation Instructions

This document provides instructions for installing drivers and using various functions for a wireless gamepad. It includes: 1) An overview of the driver files needed for different receiver types. 2) Steps for installing vibration drivers and PC360 drivers. 3) Instructions for uninstalling drivers. 4) Information on switching between wireless, Bluetooth, and wired modes. 5) Procedures for testing buttons, joysticks, and vibration on PCs and with PC360 mode. 6) A guide to customizing keyboard and mouse settings using the gamepad.

Uploaded by

murgemurge
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
655 views

Installation Instructions

This document provides instructions for installing drivers and using various functions for a wireless gamepad. It includes: 1) An overview of the driver files needed for different receiver types. 2) Steps for installing vibration drivers and PC360 drivers. 3) Instructions for uninstalling drivers. 4) Information on switching between wireless, Bluetooth, and wired modes. 5) Procedures for testing buttons, joysticks, and vibration on PCs and with PC360 mode. 6) A guide to customizing keyboard and mouse settings using the gamepad.

Uploaded by

murgemurge
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

Product Simple Specification

1Choice of driver , please choose the correct procedure to


install,they are some different driver in the driver disk.

The 0575_V01.exe file in the Wireless single gamepad with Mini


receiver file . It is used for 2.4G wirless gamepad with Mini reciever .

The 0523_USB_Network_Joystick_V31.exefile in the Wireless 3 in


1 driver file.It is used for Wireless 2.4G single gamepad with 3 in 1
receiver / bluetooth gamepad with bluetooth mini riceiver / 301
transfer cable / PC360

The 0555_Twin_USB_Network_Gamepad_V12.exe file in the


Wireless double gamepad driver file .It is uesd for Wireless 2.4G
double gamepad with Mini receiver .

2Computer driver install instruction

PC Vibration driver install.

You can look for the product driver from the disk , double click to
install it ,follow the tips to finish the installation as shown in Diagram
(1).

Picture 1
PC360 DRIVER install(If the system above the WIN7 , no neeed to
install. The system under the WIN7, need to install the driver, if you
dont install the driver , PC360 cant be used normally.)

You can look Xbox360_32chs.exe


from the disk or Microsoft offical
website, double click to install it ,follow the tips to finish the
installation as shown in Diagram 2.

Picture2

3 Uninstall driver

The driver has an uninstall program.Player can delete all files and
program. Click (START)-(CONTROL PANEL)-(ADD/DELETE) ,look
for the installed program ,uninstall and delete as shown in Diagram.

4 PC and PC360 Mode Switch (The product with PC360


Function)

Wireless 2.4G gamepad mode switch ( Press the HOME butto for 5
minutes after wire connecting )

Blutooth gamepad mode switch ( Press the SELECT+START button


for 5 minutes )

PC360 wired gamepad mode switch (Press the MODE button for 5
minutes after the USB port connected. )

301 convert cable mode switch ( Press the MODE button two times
after the USB port connected.)
5Product function test
PC function test ( Under the PC mode)
Start testing set up interface with the following two mdthods :
A .Double-Click the shortcut icon, (Game Controller) on the
desktop as shown in Diagram 2.
B.Click ( Start)-( Controller Panel )-( Game Controller ) Window
as shown in Diagram 3 would appear after the start of ( Game
Controller )

3Game Controllers

Click (Properties) in (Game Controllers ) shown as Diagram 3 to


start the test interface as shown in Diagram 4.
4Test Interface

Test the controllers functions of axis,buttons and point of view under


( Function Test ) as shown in Diagram 4.

Under ( Calibration Function ) , the axis can be calibrated, Click


( Default ) the buttons functions would return to initial state,while click
( Set ) the buttons functions would turn to standard states as shown
on Diagram 5.
5 Calibration

Test the vibration function under ( Vibration Test ) as shown in


Diagram 6.
6 Vibration Test

PC360 function test ( Under the PC360 Mode )

Switch the mode to PC360 after connecting , Find the XBox


360 Controller Test.exe from the disk,double click to open, test the
function of gamepad as shown in Diagram 7 :
7PC360 test interface

6Program Settings( Keyboard and Mouse setting , the function

must be with support driver . )

Mouse Keyboard Setup

Click ( Joy_Setup) as shown in Diagram 2 or click the ( Mouse


Keyboard Setup ) as shown in Diagram 7 under ( Vibration ) as
shown in Diagram 4 to enter the programming settings as shown in
Diagram 8.

8
( Mouse ) ( refer to 1 in Diagram 9 )

Mouse(refer to 1 in Diagram10) :

A:Select Leftjoystick and clickOK to replace the mouse function


with the left 3D joystick of the gamepad(the directional buttons have
the functions of mouse);

B:Select Right Joystick and clickOK to replace the mouse


function with the right 3D joystick of the gamepad.

C:Select None and click OK the sticks do not have Mouse


function.
10
Key send( refer to 2 in Diagram 10):

A. Select one by one and click OK to set the controller buttons


to work only one time when pressed.

B. Select Concurrent and click OK to set the controller buttons


with turbo function. ( The buttons work continuously when being
pressed.)

Mouse Slow Fast ( refer to 3 in Diagram 10):

Click and drag the slider and click OKto adjust the speed of Mouse
function on the controller.

To set the Keyboard and Mouse function to the gamepad buttons:


Select any key on the controller as shown in Diagram 9, and select
Mouse,Button map, Keyboard setup or Clear in the
drop-down list to set the Keyboard and Mouse functions to the
controller buttons.
1Mouseset the Mouse key functions to the gamepad buttons.
2Button mapset the other buttons of the gamepad function to
the selected button.
3Keyboard setup:set the Keyboard keys function to the
selected controller buttons.(Note: Each controller button can
replace 16 Keyboard keys in maximum.)
4 Clear: clear the replacement functions of the selected
buttons.

For example: to set button1on the controller with the


function of keyA of the Keyboard, first
select button 1 of the controller as shown on diagram 9.
Second, select Keyboard setup in the
drop-down list to enter the setting up interface as shown in
diagram 11. Then select Aon the
keyboard and clickOKas shown in diagram 11.Then
Button1of the controller has the function of keyAof the keyboard.
After setting, the button turn to green, and beside it are the
keys of the keyboard it can replace.(note:after finish all setting,click
OKas shown in diagram 11.

11
Click Save as shown in diagram 12 and diagram 13 to save the
settings in .pro file.

12
13

Clickloadas shown in diagram 14 and diagram 15 can open and


load the settings .pro.
14

15
Click ClearAll as shown in Diagram 16 all the buttons function
return to the default state.

16

7Cautions:

A. Without installing the right driver, some of the gamepad functions


may not work properly.Please uninstall the existing driver and
install the right driver
B. If any buttons do not work properly during games, please check
the settings of the gamepad.
C. all settings after finish,please make assure click OK.
D. The mini USB wireless receiver only works on computer,or the
consoles it supports;any other console is not noted, it cannot
work.
E. Please set the gamepad before you start playing.
F. If there is no vibration during games, please check whether install
driverwhether open the game vibration functionif the game
supports vibration.
G. after connecting the USB reveiver,if not recognized or no any
function,please do as follows:
H: change USB plug to connect.
I: The computer will prompt To find new hardware when you use this
gamepad for the first time, but after connecting,it will not happen
again,then you can confirm whether can connect.after you plug
your wireless USB reveiver,please clickGame Controllerto
test.There is one data in the Game Controller if the receiver is
connected with gamepad;if not connected it is no any data.If
connected,you can Click Propertiesin Game Controllersto
start the test.
J: Check whether is connected by the gamepad and receiver(please
follow up Wireless Transmission Connection.
K: Restar your computer.
L: Use the gamepad at room temperature (5 C35 C). Avoid using
it at high temperatures,high humidity or direct sunlight.
M: Do not let liquid or small particles to get into the gamepad.
N: Do not put heavy objects on the gamepad.
O: Never disassemble or modify the gamepad.
P: Do not bend, throw or drop the gamepad or subject it to the strong
physical shock.
Q: When cleaning the gamepad, use a soft, dry cloth. Do not use
paint thinner, solvents or other chemicals.
R: Please keep far away from Children to avoid the accident standard
brand adapter to charger gamepad.

You might also like