Training Course

SolidWorks
Simulation Professional
Course Outline Duration: 2 days Prerequisites: SolidWorks Essentials and SolidWorks Simulation

LESSON 1 Frequency Analysis of Parts LESSON 6 Advanced Thermal Stress2D LESSON 10 Optimization Analysis
LESSON 2 Frequency Analysis of Assemblies Simplification LESSON 11 Pressure Vessel Analysis
LESSON 3 Buckling Analysis LESSON 7 Fatigue Analysis
LESSON 4 Thermal Analysis LESSON 8 Advanced Fatigue Analysis
LESSON 5 Thermal Analysis with Radiation LESSON 9 Drop Test Analysis

Training Content
LESSON 1 LESSON 4 LESSON 7
Frequency Analysis of Parts Thermal Analysis Fatigue Analysis
Objectives Objectives Objectives
Modal Analysis Basics Thermal Analysis Basics Fatigue
Case Study: The Tuning Fork Case Study: Microchip Assembly Stress-life (S-N) Based Fatigue
Project Description Project Description essel
Case Study: Pressure Vessel
Frequency Analysis With Steady-State Thermal Analysis Thermal Study LESSON 10
Supports Transient Thermal Analysis Thermal Stress Study Optimization Analysis
Frequency Analysis Without Transient Analysis with Time Fatigue Terminology Objectives
Supports Varying Load Fatigue Study Optimization Analysis
Frequency Analysis with Load Transient Thermal Analysis Fatigue study with Dead Load Case Study: Press Frame
Summary using a Thermostat Summary Project Description
Questions Summary Questions Static and Frequency Analyses
Questions Optimization Analysis
LESSON 2 LESSON 8 Design Study
Frequency Analysis of LESSON 5 Advanced Fatigue Analysis Summary
Assemblies Thermal Analysis with Radiation Objectives
Objectives Objectives Case Study: Suspension LESSON 11
Case Study: The Engine Mount Case Study: Spot Light Project Description Pressure Vessel Analysis
Project Description Assembly Fatigue Study Objectives
All Bonded Contact Conditions Project Description Summary Case Study: Pressure Vessel
Bonded and Allow Penetration Steady State Analysis Questions Project Description
Contacts Summary Pressure Vessel Analysis
Summary LESSON 9 Manhole Nozzle Flange and
Questions LESSON 6 Drop Test Analysis Cover
Advanced Thermal Stress2D Objectives Summary
LESSON 3 Simplification Drop Test Analysis
Buckling Analysis Objectives Case Study: Camera
Objectives Thermal Stress Analysis Project Description
Buckling Analysis Case Study: Metal Expansion Rigid Floor Drop Test
Case Study: Partial Separator Joint Elastic Floor Drop Test
Project Description Project Description Elasto-Plastic Material Model
Summary Thermal Analysis Drop Test with Contact
Questions Thermal Stress Analysis Summary
3D Model
Summary
Questions

AUSTRALIA NEW ZEALAND

| SYDNEY | MELBOURNE | BRISBANE | PERTH | ADELAIDE | AUCKLAND | CHRISTCHURCH |