Scribd
Upload
159 views

MECH 581a4 Rocket Propulsion Class Notes - Page: 1 Notes02.doc Thrust and The Rocket Equation Text: Sutton Ch. 2 and 4 Technical Objectives

This document provides technical objectives and derivations related to rocket propulsion, including: 1) Deriving an equation for total thrust generated by any rocket using conservation of momentum. 2) Deriving the "rocket equation" which relates rocket mass, exhaust velocity, and change in velocity over time. 3) Using the rocket equation to determine velocity at burnout and maximum height for a vertically launched rocket, accounting for variations in atmospheric density, drag, and gravity with altitude.

Uploaded by

Uma Mageshwari
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
159 views

MECH 581a4 Rocket Propulsion Class Notes - Page: 1 Notes02.doc Thrust and The Rocket Equation Text: Sutton Ch. 2 and 4 Technical Objectives

This document provides technical objectives and derivations related to rocket propulsion, including: 1) Deriving an equation for total thrust generated by any rocket using conservation of momentum. 2) Deriving the "rocket equation" which relates rocket mass, exhaust velocity, and change in velocity over time. 3) Using the rocket equation to determine velocity at burnout and maximum height for a vertically launched rocket, accounting for variations in atmospheric density, drag, and gravity with altitude.

Uploaded by

Uma Mageshwari
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 9

MECH 581a4 Rocket Propulsion Class Notes - Page: 1

notes02.doc Thrust and the Rocket Equation Text: Sutton Ch. 2 and 4

Technical Objectives:
Derive an equation for the total thrust generated by any rocket.
Derive the rocket equation using the conservation of momentum.
Determine the velocity at burnout and the maximum height for a vertically launched rocket.
1. Derivation of Thrust for a Rocket Engine
Consider the following rocket undergoing a static test firing:

Drawing a control surface around the rocket, the conservation of momentum can be formulated
as follows:

(1)

Since the engine is not moving, drag force will be zero and if the system is at steady state, we
can formulate the conservation of momentum in the x-direction as follows:
External Forces:

Momentum Flux:
MECH 581a4 Rocket Propulsion Class Notes - Page: 2
notes02.doc Thrust and the Rocket Equation Text: Sutton Ch. 2 and 4

Results in the following equation:

(2)

This is a general result for a static firing of a rocket engine.


Note that thrust is generated by the momentum flux term and the pressure difference term,
although for maximum thrust, you want to design your rocket nozzle so that the pressure term
exhaust pressure = the ambient pressure. Why is this?

Effective Exhaust Velocity, c.


The effective exhaust velocity is defined as actual thrust divided by the mass flow rate:

Therefore, with respect to the effective exhaust velocity, the thrust can be written as follows:

(3)

And, recalling the definition of specific impulse, we see that the effective exhaust velocity is
related to the specific impulse as follows:

(4)
MECH 581a4 Rocket Propulsion Class Notes - Page: 3
notes02.doc Thrust and the Rocket Equation Text: Sutton Ch. 2 and 4

2. The Rocket Equation


So far, we have derived an equation for thrust of a rocket. The equation was derived by
considering a static firing of a rocket on a thrust stand. In this section, we will consider what
happens when a rocket is actually in motion. Specifically, we will use the conservation of
momentum to derive "The Rocket Equation".
Consider the following rocket in motion. The rocket is travelling with a velocity, v. The exhaust
gas is exiting the rocket with an exhaust velocity, ue, generating a thrust F. There is a drag
force D, acting on the rocket.
Rocket in Motion Control Volume

Formulating the conservation of momentum in the x-direction for the control volume on the right:

External Forces:

Right Hand Side terms:

Substituting:
MECH 581a4 Rocket Propulsion Class Notes - Page: 4
notes02.doc Thrust and the Rocket Equation Text: Sutton Ch. 2 and 4

And recognizing the definition of effective exhaust velocity, c, the equation becomes:

Multiplying through by dt, the final equation of motion becomes:

(5)

This equation is called The Rocket Equation.

The Rocket equation can be integrated from time = 0 to any time t, resulting in:

In the absence of drag and gravity, the equation becomes:

Finally, defining Mb as the mass of the rocket at burnout, and Mo as the initial rocket mass, we
can define R as the rocket mass ratio:

(6)

Resulting in the famous v equation that relates Isp, mass ratio and total rocket v for a rocket:

(7)

Note: v is given by the mission requirements, Isp is specified by the propellant combination,
so R is the only parameter you can varyand it is buried in a natural log term.
MECH 581a4 Rocket Propulsion Class Notes - Page: 5
notes02.doc Thrust and the Rocket Equation Text: Sutton Ch. 2 and 4

Example 2.1
Known: Escape velocity from the earth's surface is approximately 12,000 m/s.
Find: The percentage of a launch vehicle's initial mass that must be devoted to propellant if
escape velocity is to be achieved.
Given: Neglect gravity, and assuming an Isp of 300 seconds.

3. Velocity at Burnout and Maximum Height for a Vertically Launched Rocket


In the previous example, we neglected gravity. Returning back to the rocket equation, now lets
consider the launch of a vehicle perpendicular to earth with zero drag. This equation will allow
us to determine the velocity at burnout and the maximum height achieved.
Note: There are two regimes: burn regime and coast regime!
Integrating the rocket equation from 0 to any time t:

The instantaneous mass, m(t) is related to the initial mass, the propellant flow rate, and the
elapsed time through the following relationship:
MECH 581a4 Rocket Propulsion Class Notes - Page: 6
notes02.doc Thrust and the Rocket Equation Text: Sutton Ch. 2 and 4

Substituting the instantaneous rocket mass into the rocket equation yields:

(8)

The velocity at burnout occurs at t = tb:

(9)

To find the height at burnout, you have to integrate the velocity equation once more with respect
to time:

(10)

To find the maximum height, we have to now consider the coast regime:

Adding hb and hcoast results in the maximum height:

(11)
MECH 581a4 Rocket Propulsion Class Notes - Page: 7
notes02.doc Thrust and the Rocket Equation Text: Sutton Ch. 2 and 4

Example 2.2
Known: Escape velocity from the earth's surface is approximately 12,000 m/s.
Find: The percentage of a launch vehicle's initial mass that must be devoted to propellant if
escape velocity is to be achieved.
Given: Include gravity, assume an Isp of 300 seconds and consider the fact that a human
passenger must not be exposed to more than 6 g's of acceleration.

8. The Effect of Drag


The final equation for maximum height in a vacuum suggests that, for a given Isp and vehicle
mass ratio, short burn times are better. This is because you get rid of all of the propellant
quickly and you don't have to lift as much mass.
However, drag force, D, is a strong function of altitude (because of the density of the air) so
when you include drag, you may have to design for low velocity at low altitudes. Recall from
Fluid Mechanics:

(12)

Where is the atmospheric density, v is the vehicle velocity, A is the x-sectional area, and CD is
the drag coefficient, which is a function of velocity or Mach #.
MECH 581a4 Rocket Propulsion Class Notes - Page: 8
notes02.doc Thrust and the Rocket Equation Text: Sutton Ch. 2 and 4

Variation in Drag Coefficient


A typical plot of drag coefficient vs. Mach # is shown below:

Note: drag coefficient varies with angle of attack and Mach number.
Variation in Atmospheric Density:
To estimate the variation in atmospheric density with height, you can use the following
relationship, which is not very accurate, but a good estimate:

(13)

Where h is in meters and is in kg/m3.


Variation in Acceleration Due to Gravity
The acceleration due to gravity also changes with altitude, but not much. The following
equation can be used to calculate the variation in g:

(14)

Numerical Integration of the Rocket Equation


It is possible to include the effects of drag and changes in g into the rocket equation and
integrate it numerically:
MECH 581a4 Rocket Propulsion Class Notes - Page: 9
notes02.doc Thrust and the Rocket Equation Text: Sutton Ch. 2 and 4

Example 2.3. Numerical Integration of Vertical Launch with Drag

The German V2 Rocket. Use the rocket equation to determine the burnout
velocity and the maximum achievable height of the German V2 rocket,
assuming that it was launched vertically. Take into account drag coefficient
(See Below), variation in atmospheric density with altitude and solve the
rocket equation numerically using a forward difference scheme. Solve for
maximum altitude.
Given: Isp = 250 seconds, Mo = 12700 kg, Mp = 8610 kg, tb = 60 s

Numerical solution
scheme:

You might also like