Data Sheet

xPSK/COFDM Transmodulation Equipment

MTI800 MTI900
REF. 4099 REF. 4098

JJ Digital transmodulation (xPSK COFDM) with

Transport Stream Processing.
JJ The channels located in the Sat-IF frequency band (950-2150 MHz)J
are transformed into COFDM channels located in the 47-862 MHz band.

MTI-800 MTI-900

Recepction DVB-S (QPSK), DVB-S2 (QPSK/8PSK)

Transport Stream (TS) processing Yes
Common Interface (EN 50221) No Yes
Number of encrypted programmes VariableJ

being supported (depends on the CAM)

Input Section (QPSK/8PSK)

Input frequency MHz 950 2150
-65 -25 (DVB-S),J
Input level dBm -65 -25
-70 -25 (DVB-S2)
Input loop-through gain dB 0 (1)
AFC pull-in range MHz 5
Input Symbol rate MS/s 2 45 (DVB-S), 10 30 (DVB-S2)

COFDM Re-modulation Section

Constellation QPSK, 16QAM, 64QAM
Code rate 1/2, 2/3, 3/4, 5/6, 7/8
Guard interval 1/4, 1/8, 1/16, 1/32
MER (Modulation Error Ratio) dB > 38 (typ.)
J
RF Output Section (COFDM)
Selectable output channel located
MHz 47 862
between:
Bandwidth MHz 5 (DVB-H), 6, 7, 8
Adjustable output level dBV 65 80
J
General
Supply voltage Vdc +12
Input CAM 1 slot (EN 50221)
730 (w/o CAM),J
Consumption mA 730
870 (with CAM)
Operating temperature C 0 +45
IKUSUP bus connector (2x) 4-pin socket
Dimensions mm 230 x 195 x 32

Each module is packed with:

- 2 F plug bridges, 64 mm length, for input tap line and output coupling line.
- 1 DC plug bridge, 53 mm length, for connection of +12 Vdc voltage.

SEDE CENTRAL
IKUSI - ngel Iglesias S.A. P Miramn, 170 20014 San Sebastin SPAIN
Tel.: +34 943 44 88 00 Fax: +34 943 44 88 20 [email protected] www.ikusi.tv
  
 
 

  









        








       



 


       

  

 
 


         

 
 
 
 
 
 
 
 
  
 

 
   




 
  
  
  
  
  
  
  

       
       

 
 
 
 
 
 
 
 








  










Ejemplo de estacin MTI para ocho transpondedores. Contiene 8 transmoduladores

MTI-900, 1 Amplificador y 2 Alimentadores, instalados todos ellos en 2 Bases-Soporte.

 CAM slot 


 

(MTI-900) 



 

Bases IKUSUP
 


 

 

slot CAM






 


   

 










 



 
 
 




 


 

 

 

CAM modules are not MTI-900 MTI-800
supplied by IKUSI

MTI HEADENDS
JJ Digital transmodulation (xPSK COFDM) with Transport Stream Processing. The QPSK or 8PSK channels lo-
cated in the Sat-IF frequency band (950-2150 MHz) are transformed to COFDM channels located in the 47-862
MHz band.
JJ Range includes two transmodulators: MTI-900 and MTI-800.
The MTI-900 has Common Interface (EN 50221) for discretionary de-encrypting of TV programmes.

FUNCTIONAL DESCRIPTION OF THE MTI TRANSMODULATORS

An MTI transmodulator carries out the complete channel processing from the input to the output:
JJ tunes a xPSK digital channel of the 950-2150 MHz band, demodulates the signal being received,
JJ processes the transport stream (with programme de-encrypting in the MTI-900, if this one has a
CAM + Operator Card couple is installed), and
JJ re-modulates it in COFDM format on an RF channel that is selectable within the 47-862 MHz frequency range.
Module programming involves the following selections and settings:
JJ Central xPSK Input Frequency (1 MHz steps)
JJ Input Symbol Rate (0.001 MS/s steps)
JJ Central COFDM Output Frequency (1 kHz steps)
JJ Output Channel Bandwidth (6, 7 or 8 MHz; also 5 MHz on DVB-H)
JJ Output Operation Mode (2K or 8K; also 4K on DVB-H)
JJ RF Output Level
JJ FFT Window (Fast Fourier Transform), to reduce interference on adjacent channel
JJ In-depth interleaving (only on DVB-H; with 2K and 4K modes)
JJ Discretionary de-encrypting of one or more Services (only for MTI-900)
JJ Optional Blockade of Services, PIDs and Conditional Accesses, with Regeneration of Tables
JJ NIT Adaptation

SEDE CENTRAL
IKUSI - ngel Iglesias S.A. P Miramn, 170 20014 San Sebastin SPAIN
Tel.: +34 943 44 88 00 Fax: +34 943 44 88 20 [email protected] www.ikusi.tv