Scribd
Upload
180 views1 page

Quality Control Inspection Checklist Cast In-Situ RC (During Pour)

This inspection checklist is for a quality control review of the concrete pouring process for Block 3 of the Stonor 3 project. It outlines 8 items to inspect, including compaction of concrete layers, reinforcement placement, pouring time, construction joints, and curing. Inspectors from the contractor, LHS, and consultant firms will check that each item passes specifications and identify any nonconformances.

Uploaded by

Syerifaizal Hj. Mustapha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
180 views1 page

Quality Control Inspection Checklist Cast In-Situ RC (During Pour)

This inspection checklist is for a quality control review of the concrete pouring process for Block 3 of the Stonor 3 project. It outlines 8 items to inspect, including compaction of concrete layers, reinforcement placement, pouring time, construction joints, and curing. Inspectors from the contractor, LHS, and consultant firms will check that each item passes specifications and identify any nonconformances.

Uploaded by

Syerifaizal Hj. Mustapha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

QUALITY CONTROL PROJECT

INSPECTION CHECKLIST STONOR 3

PHASE: Document Ref.:


BLOCK NO.: CAST IN-SITU RC RFI No:
UNIT NO.: (DURING POUR) Received By:
Date: Time:

Location: Effective Date: 20/10/16 Rev. 0 Page 1 of 1

Item Inspection Attributes Contractor LHS Consultant

(Representative's name in block letter)


Pass Fail Pass Fail Pass Fail
2 CHECK DURING CASTING AND POST CASTING

a Compaction in horizontal layers of less than 450mm

b Thoroughly worked between forms and reinforcement

c Poring time START FINISH

d Alignment, elevations and supports checked during pouring

e Construction joints (horizontal) in required position

f Finish of concrete as specified (type/ class of finish .)

g Concrete curing applied as specified (type of curing ..)

h Amount of concrete poured .m3

(Representative's name in block letter)


Pass Fail Pass Fail Pass Fail
Final Inspection
Review of all records including required test results

Reason for Failure or Re-inspection:

Nonconformance Report raised during inspection/ re-inspection YES NO NCR No.:

Signature of Sub-contractor Rep: Date: Time:

Full name in block letters:

Signature of LHS Rep: Date: Time:

Full name in block letters:

Signature of Consultant Rep: Date: Time:

Full name in block letters:

You might also like