Scribd
Upload
110 views

C V

Ahmed Abedulraouf Ahmed is seeking a position as Head of QA/QC Department or Deputy QA/QC Manager. He has over 15 years of experience in mechanical QA/QC, production management, and mechanical inspection and testing. He has worked for several manufacturing companies in Egypt and Saudi Arabia, most recently as a mechanical sciences lecturer in Saudi Arabia. He has technical qualifications in CNC programming, internal auditing, health and safety standards, and API and ISO quality certifications.

Uploaded by

Anonymous LsLQlbYS
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
110 views

C V

Ahmed Abedulraouf Ahmed is seeking a position as Head of QA/QC Department or Deputy QA/QC Manager. He has over 15 years of experience in mechanical QA/QC, production management, and mechanical inspection and testing. He has worked for several manufacturing companies in Egypt and Saudi Arabia, most recently as a mechanical sciences lecturer in Saudi Arabia. He has technical qualifications in CNC programming, internal auditing, health and safety standards, and API and ISO quality certifications.

Uploaded by

Anonymous LsLQlbYS
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

C.

V
AHMED ABEDULRAOUF AHMED
HEAD OF MECHANICAL QA/QC DEPARTMENT
Tel. (1): (330)808-9453
E-mail: [email protected]
Address: 1580 Lillian Rd. stow, Ohio, USA.
Zip Code: 44224

Professional Objectives:
Seeking for a job as a:
1- HEAD OF QA/QC DEPARTMENT (VALVES MANUFACTURING MAINTENANCE/REPAIR/
INSPECTION & MECHANICAL SPEAR PARTS).
2- DEPUTY QA/ QC. MANAGER& PRODUCTION MANAGER
3- MECHANICAL PRODUCTS INSPECTOR AND TESTER
4- DOCUMENT CONTROLER AND API & QMS AUDITOR
5- MECHANICAL SPARE PARTS SALES ENGINEER

Education:
1. Academic education
- University : BENI-SWEIF University graduate.
- Faculty : Faculty of mechanical Industrial education.(2003)
- Total degree : Good (73 %)
A - Department : Mechanical department (Production)
- Grade of project: Excellent.
- Graduation date : 2003
- Technical institute: Ministry of Higher Education.
B - Department : Mechanical department (AUTO/CARS/VEHICLE).
- Total degree : Very Good (75.2 %)

Experiences
2. Work experiences:
From 2004 to 2005
I had worked for Egypt motor parts Co. for manufacturing ( SPEAR PARTS)
A
OF Internal Combustion Engine

B I had worked in ASFOUR CRYSTAL CO. in mechanical CNC DPARTMENT.

From 2005 to 2010


I had worked for QUALIVAL COMPANY
(http://www.qualival.com.eg/home_page.html)
C (https://www.youtube.com/watch?v=rnhIBTPlJBE)
(API certified Company) for Design, Development and Production of oil and gas
pipelines valves & metallic products (A sole producer company for MV ball
valves) and services for a variety of equipment used by the oil, gas,
Petrochemicals, Power and related industries
the departments which I have worked:
- Programmer. C.N.C MACHINES
- Technical department.
- Quality Control department.
- Assembly & test department.
- Production department & Work shop.
Working data in Qualival co.:
As Quality Control Manager assistant and API
document controller
Responsibilities:
- Quality Control Inspector and Tester for all (final products)
- Quality Control during all mechanical operations (in process).
- Quality Control for all the engineering drawings (technical department).
- Internal Auditor & Document Controller (ISO 9001-2008 & API spec Q1
& 6D).
- Document controller for the ISO 9001-2000 certificate from TV
Germany.
- Assembly & test supervisor.
Since February 2010 until 2013.
I have been employed by SASIS company (http://sasib.com.sa/) for
manufacturing mechanical spare parts, die& mold spares, Mechanical Seal
D Parts for Centrifugal Pumps , shaft, sleeves, gland rings, bronze products,
collars, compression rings, and pins ..) and provide specialist repair,
maintenance /repair for various mechanical spare parts equipment e.g.
(HVOF Coating Machine, Selective plating) that company located in (DALA)
industrial area in (DAMAM city) in kingdom of Saudi Arabia.

Since February 2013 until July, 2016.


I have worked as mechanical sciences lecturer/ instructor and head of training
Department for TAFEA RABIA Institute for technical and further education in
F (DAMMAM city), kingdom of Saudi Arabia. http://www.tafear.com/play.php?
catsmktba=119
Courses:

Technical Courses:
A - Programming Operating And Inspection CNC Machines from (DETI):
B - Internal auditing from (MIC) (management & industrial company).
C - OHSAS 18000 :2007& OSHA 18001:1999 ISO 14000:2004\
D - AutoCAD program. Mechanical spear parts Product
C - API spec Q1 & 6D monogram (for petroleum fields).
-
Languages:
- Fluent Arabic (mother language) & English "2nd language".

Skills:
work skills:
-Supervise and perform API QA/QC activities (calibration, in/final inspection process and
documentations)
-Lead and direct the Quality team to perform QC activities including inspections of various
disciplines, testing and reporting.
-Working knowledge of International Standards API, BS, ASTM, etc.
-Knowledge of ISO: 9008 and API, certification as Internal / Lead auditor is an asset.
-Ability to prepare Quality System documentation and reports required for project, and to
implement the company Quality System.
-Excellent command of English Language.

Computer skills:
-Computer literate in Microsoft Office applications /Auto CAD program, , Internet
research, & Microsoft and others
Office applications.
Very good working knowledge of software programs

Personal skills:
Active, Honest, Patient, Sociable, Organized, religious, hard worker and ambition.
Able to adapt to different environments, understand different cultures and traditions.
-Exceptional communication skills and ability to relate with various nationalities
Personal data:

Date of birth : OCTOBER 25th, 1981


Military status: Exempted.
Gender : Male.
Note:
All evidential references Upon Request.

You might also like