SYLLABUS PLANNED PERIOD SCHEME (Theory)

GNDEC DEPARTMENT : MECHANICAL ENGINEERING SUBJECT CODE:

SUBJECT: STRERNGTH OF MATERIAL SOM (1) BTME301
SYL YEAR : 2nd SEM :3rd BRANCH :MECHANICAL PAGE 01 OF 03
COVRD TOTAL PERIOD PER WEEK 06 LECTURE 04 PRACTICAL 02
.
S.NO PERIO TOPIC DETAILS INSTRUCTION ADDITIONAL ASSIGNMENT Remarks
D NO. REFERENCES STUDY

1 1 Simple, Stress and Strain and their types, Hooks law, STRENGTH OF NPTEL
Compound MATERIALS lectures by
Longitudinal and lateral strain, Poissons ratio and their BY Dr. R.K Prof. S.K
Stresses
related numerical problems. RAJPUT Bhattacharya
and Strains

2 2 Stress-strain diagram for ductile and brittle materials, NPTEL
LECTURES
3 3 Extension of a rectangular bar due to without and with self BY
Dr. SURAJ
weight, bar of uniform strength. PARKASH
HARSHA
4 4 Stress in a bar of conical section and tie, and related
problems.
5 5 Elastic constants and their significance, Youngs modulus Solve Problems
Related To
Assignment :1
of elasticity, modulus of rigidity and bulk modulus and Numerical
Foreign Author problem to
related problems. Books.
stress strain ,
6 6 Relation between elastic constants, Youngs modulus of elastic
elasticity, modulus of rigidity and bulk modulus. constants,
7 7 Temperature stress and strain calculation due to axial load Thermal
and variation of temperature in single and compound bars. stress and
strain, Mohr
8 8 Numerical problem in thermal stress and strain in nut circle for
and bolt etc.
stress
9 9 Two dimensional stress system, stress at a point on a plane, calculation on
principal stresses and principal planes, stresses
10 10 Mohrs circle of stress for one dimensional, two
 dimensional normal stresses.
11 11 Mohrs circle of stress for one dimensional, two
dimensional normal stresses along with shear stress on
oblique planes.
12 12 Ellipse of stress and their applications. Generalized Hook's
law, principal stresses related to Principal strains.
13 13 Bending Shear force and Bending Moment definitions; Relation STRENGTH OF NPTEL Assignment :2
Moment MATERIALS lectures by
between load, shear force and bending moment. BY Prof. S.K
(B.M) and
Dr. R.K Bhattacharya
Shear Force Numerical
BANSAL
(S.F) problems
Diagrams related to
14 14 B.M and S.F diagrams for cantilever beams with UDL, bending
concentrated load stresses and
shear force on
15 15 B.M and S.F diagrams for cantilever beams with, varying different type
and combined load conditions.
of beams,
16 16 B.M and S.F diagrams for simply supported beams with point of
UDL, concentrated load Contraflextur
17 17 B.M and S.F diagrams for simply supported beams with, e problems
varying and combined load conditions.
18 18 B.M and S.F diagrams for overhanging beams with UDL,
concentrated load
19 19 B.M and S.F diagrams for overhanging beams with,
varying and combined load conditions.

20 20 Application of moments related to different beam NPTEL
LECTURES
conditions and some numerical problems. BY
21 21 Bending Assumptions in the simple bending theory; derivation of STRENGTH OF Dr. SURAJ
Stresses In MATERIALS PARKASH
formula and its application to beams of rectangular BY HARSHA
Beams:
Dr. R.K
BANSAL
 22 Circular and channel, I and T- sections. Combined direct
22 and bending stresses in afore-mentioned sections

23 23 Bending stress in composite / flitched beams.

24 24 Torsion Derivation of torsion equation and its assumptions and its

application to the hollow shaft and related problems.
25 25 Derivation of torsion equation and its assumptions and its NPTEL
LECTURES
application to the solid shaft and numerical. BY
26 26 Torsional rigidity, combined torsion and bending of Dr. SURAJ
PARKASH
circular shafts. HARSHA
27 27 Principal stress and maximum shear stresses under
combined loading of bending and torsion

28 28 Columns Introduction, failure of columns, Eulers formula, STRENGTH OF Assignment
MATERIALS BY
and struts No :3
Dr. R.K RAJPUT
29 29 Rankine- Gordons formula in columns and struts..
Torsion
30 30 Johnsons empirical formula for axially loaded columns related
and their applications. And related problems. practical

31 31 Slope and Relationship between moment, slope and deflection; STRENGTH OF problems,
MATERIALS BY
deflection column and
Dr. R.K BANSAL
struts, slope
32 32 Method of integration for SSB, Cantilever beams with
concentrated load and UDL and
deflection
33 33 Numerical Problems connection with slope and deflection
by M.O.I to SSB and cantilever beams. numerical
problems
34 34 Method of integration for overhanging beams with varying
load and related problems.
35 35 Numerical Problems connection with slope and deflection
by M.O.I overhanging beams calculations
36 36 Macaulays method for SSB, Cantilever beams with
concentrated load and UDL
37 37 Macaulays method for overhanging beams with varying
load and related problems.
38 38 Moment area method for SSB, Cantilever beams with
concentrated load and UDL
39 39 Moment area method for overhanging beams with varying
load and related problems.
40 40 Moment area method, Macaulays Method to SSB,
Cantilever and Overhanging Beam numerical problems.