Arduino Manual Electronic Counter 0-9 (push switch & 7 Seg Display) - Arduino Proteus tutorial # 27

YouTube

int x0,x1,x2,x3,x4,x5,x6,x7,x8,x9; int delay_time=200; void setup() { //configure pin2 as an input and
enable the internal pull-up resistor pinMode(12, INPUT_PULLUP); pinMode(1,OUTPUT);
pinMode(2,OUTPUT); pinMode(3,OUTPUT); pinMode(4,OUTPUT); pinMode(5,OUTPUT);
pinMode(6,OUTPUT); pinMode(7,OUTPUT); } void loop() { //read the pushbutton value into a variable
int sensorVal = digitalRead(12); if (sensorVal == LOW) { x0=true; } while(x0){ zero(); sensorVal =
digitalRead(12); if (sensorVal == LOW) { x1=true; x0=false; } } while(x1){ one(); sensorVal =
digitalRead(12); if (sensorVal == LOW) { x2=true; x1=false; } } while(x2){ two(); sensorVal =
digitalRead(12); if (sensorVal == LOW) { x3=true; x2=false; } } while(x3){ three(); sensorVal =
digitalRead(12); if (sensorVal == LOW) { x4=true; x3=false; } } while(x4){ four(); sensorVal =
digitalRead(12); if (sensorVal == LOW) { x5=true; x4=false; } } while(x5){ five(); sensorVal =
digitalRead(12); if (sensorVal == LOW) { x6=true; x5=false; } } while(x6){ six(); sensorVal =
digitalRead(12); if (sensorVal == LOW) { x7=true; x6=false; } } while(x7){ seven(); sensorVal =
digitalRead(12); if (sensorVal == LOW) { x8=true; x7=false; } } while(x8){ eight(); sensorVal =
digitalRead(12); if (sensorVal == LOW) { x9=true; x8=false; } } while(x9){ nine(); sensorVal =
digitalRead(12); if (sensorVal == LOW) { x0=true; x9=false; } } } void zero() { for(int i=1;i<7;i++)
{ digitalWrite(i,HIGH); digitalWrite(7,LOW); } delay(delay_time); } void one() { digitalWrite(1,LOW);
digitalWrite(2,HIGH); digitalWrite(3,HIGH); digitalWrite(4,LOW); digitalWrite(5,LOW);
digitalWrite(6,LOW); digitalWrite(7,LOW); delay(delay_time); } void two() { digitalWrite(1,HIGH);
digitalWrite(2,HIGH); digitalWrite(3,LOW); digitalWrite(4,HIGH); digitalWrite(5,HIGH);
digitalWrite(6,LOW); digitalWrite(7,HIGH); delay(delay_time); } void three() { digitalWrite(1,HIGH);
digitalWrite(2,HIGH); digitalWrite(3,HIGH); digitalWrite(4,HIGH); digitalWrite(5,LOW);
digitalWrite(6,LOW); digitalWrite(7,HIGH); delay(delay_time); } void four() { digitalWrite(1,LOW);
digitalWrite(2,HIGH); digitalWrite(3,HIGH); digitalWrite(4,LOW); digitalWrite(5,LOW);
digitalWrite(6,HIGH); digitalWrite(7,HIGH); delay(delay_time); } void five() { digitalWrite(1,HIGH);
digitalWrite(2,LOW); digitalWrite(3,HIGH); digitalWrite(4,HIGH); digitalWrite(5,LOW);
digitalWrite(6,HIGH); digitalWrite(7,HIGH); delay(delay_time); } void six() { digitalWrite(1,HIGH);
digitalWrite(2,LOW); digitalWrite(3,HIGH); digitalWrite(4,HIGH); digitalWrite(5,HIGH);
digitalWrite(6,HIGH); digitalWrite(7,HIGH); delay(delay_time); } void seven() { digitalWrite(1,HIGH);
digitalWrite(2,HIGH); digitalWrite(3,HIGH); digitalWrite(4,LOW); digitalWrite(5,LOW);
digitalWrite(6,LOW); digitalWrite(7,LOW); delay(delay_time); } void eight() { digitalWrite(1,HIGH);
digitalWrite(2,HIGH); digitalWrite(3,HIGH); digitalWrite(4,HIGH); digitalWrite(5,HIGH);
digitalWrite(6,HIGH); digitalWrite(7,HIGH); delay(delay_time); } void nine() { digitalWrite(1,HIGH);
digitalWrite(2,HIGH); digitalWrite(3,HIGH); digitalWrite(4,HIGH); digitalWrite(5,LOW);
digitalWrite(6,HIGH); digitalWrite(7,HIGH); delay(delay_time); }