Scribd
Upload
108 views2 pages

Off Shore 1300-1800

This document provides specifications for Sullivan-Palatek's Off Shore portable air compressor series. Key features include air ends manufactured by Sullivan-Palatek, corrosion protection for offshore use, noise levels under 76 dBA, and automatic shutdown protection systems. Engine options include Caterpillar or Cummins diesel engines. Compressor models provide 1300-1800 CFM at operating pressures from 100-150 PSIG and are powered by 475-540 HP engines running at 1800-2100 RPM. Dimensions and 23,800 pound weights are also noted.

Uploaded by

Irwin Jose
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
108 views2 pages

Off Shore 1300-1800

This document provides specifications for Sullivan-Palatek's Off Shore portable air compressor series. Key features include air ends manufactured by Sullivan-Palatek, corrosion protection for offshore use, noise levels under 76 dBA, and automatic shutdown protection systems. Engine options include Caterpillar or Cummins diesel engines. Compressor models provide 1300-1800 CFM at operating pressures from 100-150 PSIG and are powered by 475-540 HP engines running at 1800-2100 RPM. Dimensions and 23,800 pound weights are also noted.

Uploaded by

Irwin Jose
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

D1300-D1800

Off Shore
Portable Series

Off Shore Features:


Air End Manufactured by Sullivan-Palatek Enclosure Fabricated from Galvaneal and
Exclusive Three Year Warranty On Air End Powder Coated to Provide Maximum
Automatic 0 to 100% Capacity Corrosion Protection
Control Environmentally Friendly Containment
10 Closed Start, Pneumatic Valve Base Fabricated from Steel and Galvanized
One 3 Service Connection for Maximum Corrosion Protection
Oil Level Sight Gauge Galvanized Railings to Protect Machine in
Close Quarters
Caterpillar or Cummins Engine
Chalwyn Valve with Emergency Pull
Noise Level Limited to Maximum of
Handle
76 dBA at 7 Meters Heavy Duty Fuel/Water Separator
Automatic Shutdown and Protection System Line Backer Protection
Direct Drive-No Gears Pull Tested Galvanized Skid with Four
Aluminized Fuel Tanks Point Lift
IQ Package (Optional) Spark Arrestor Mufflers

Dedicated to Quality & Committed to Support


TECHNICAL DATA
DIMENSIONS Dimensions & Specifications subject to change without notice

(Metric in Parentheses)

SPECIFICATIONS
COMPRESSOR SPECS ENGINE SPECS
CATERPILLAR (All CA Models) CUMMINS (All CU Models) CATERPILLAR CUMMINS
Type Single Stage, oil flooded rotary screw Type Diesel Diesel
Ambient Oper. Temp. Range -20 to +125F (-29 to +52C) Number of Cylinders 6 6
Oil Capacity 55 gal. (208 L) Bore and Stroke 5.39 x 6.73 (137 x 5.39 x 6.65 (137 x
171mm) 169mm)
Total Receiver Volume 21 ft. (595 L) Displacement 928 in (15.2 L) 915 in (15 L)
Air Service Connections 3 NPT Total Oil Capacity 8.75 gal. (33 L) 12 gal. (45.41 L)
Type Cooling System Oil to Air Cooling System Capacity 18.5 gal. (70 L) 18.5 gal. (70 L)
Type Air Intake System Two Stage Dry Battery Rating 24 Volts 24 Volts
Type of Control 0-100% Demand CCA @ 0F 1400 Amps per Battery 1400 Amps per Battery
Tire Size 8-14.5 Idle Speed 1400 RPM 1400 RPM
Operating Pressure Range 70-150 psig (4.9 - 10.3 Bar) Fuel Tank Capacity 200 gal (757 L) 200 gal. (757 L)
Estimated Weight, Serviced 23,800 Lbs.

COMPRESSORS ENGINES
Rated Operating HP @ Rated Full Load
Rated Delivery Model
Pressure RPM Speed
D1300SHCA 1300 cfm (37 m /min) 150 psig (10.3 Bar) C15 ACERT 475 HP 1800 RPM
D1600SCA 1600 cfm (45 m /min) 125 psig (8.6 Bar) C15 ACERT 475 HP 1900 RPM
CATERPILLAR
D1600SHCA 1600 cfm (45 m /min) 150 psig (10.3 Bar) C15 ACERT 540 HP 2000 RPM
D1800SCA 1800 cfm (51 m /min) 100 psig (8.6 Bar) C15 ACERT 475 HP 2100 RPM
D1300SHCU 1300 cfm (37 m /min) 150 psig (10.3 Bar) QSX15 485 HP 1800 RPM
D1600SCU 1600 cfm (45 m /min) 125 psig (8.6 Bar) QSX15 485 HP 1900 RPM
CUMMINS D1600SHCU 1600 cfm (45 m /min) 150 psig (10.3 Bar) QSX15 535 HP 2000 RPM
D1800SCU 1800 cfm (51 m /min) 100 psig (6.9 Bar) QSX15 485 HP 2100 RPM
D1800SMCU 1800 cfm (51 m /min) 125 psig (8.6 Bar) QSX15 535 HP 2100 RPM

1201 W. US Highway 20 Tel: 219-874-2497


Michigan City, IN 46360 Tel: 800-438-6203
www.sullivanpalatek.com Email: [email protected]
OS 1300-1800 FP 09/13 1M

You might also like