Scribd
Upload
344 views2 pages

Manual Hydraulic Hand Pump

The document describes a portable manual hydraulic hand pump. It consists of a hand pump mounted on a two-wheeled cart with flexible hoses and quick disconnect couplings, allowing it to be wheeled to valve operators as needed. To operate a valve, the pump is connected to the operator and pumped manually to open or close the valve. It then can be disconnected and returned to storage. The pump provides manual operation capability to multiple valve operators in a portable design.

Uploaded by

Srinivas Ds
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
344 views2 pages

Manual Hydraulic Hand Pump

The document describes a portable manual hydraulic hand pump. It consists of a hand pump mounted on a two-wheeled cart with flexible hoses and quick disconnect couplings, allowing it to be wheeled to valve operators as needed. To operate a valve, the pump is connected to the operator and pumped manually to open or close the valve. It then can be disconnected and returned to storage. The pump provides manual operation capability to multiple valve operators in a portable design.

Uploaded by

Srinivas Ds
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Manual Hydraulic

Hand Pump
The all new balanced piston pump design provides
an efficient hand pumping system to close or open
conventional pipeline valves and acts as a standby
manually operated system. The pump has a balanced
ram design to eliminate accidental or uncontrolled
action of the pump ram in the event that pressurized
gas or fluid should enter the pump cavity under the
piston. The pump also provides an improved hand
pump system which eliminates cavitation, or sucking
air, by forcing fluid into pump suction chamber during
the downward pressure stroke, therefore, providing a
full cavity of oil for the next pressure stroke.

This anti-cavitation feature allows the pump to be


stroked at any speed without drawing a vacuum
into the pumping chamber. A further provision is the
automatic self-neutralizing feature which functions in
the event that the valve selector is left in either the
open or close position after hand pumping.

This self-neutralizing feature pilots the valve controls


into neutral or automatic when power oil or gas is
forced into the hand pump system. To eliminate
leaving the pump ram in the up position exposed to
atmospheric conditions, the pump is equipped with
a manual operated pressure relief valve for relieving
pressure after the pumping cycle is complete.

This relief valve feature allows the ram to be pulled


back down into the pump head, thus protecting
it against corrosive or detrimental atmospheric
conditions.

Other improvement features include:


1. Fully hard-anodized aluminum body
construction for salt atmosphere protection.
2. Stainless steel port connections for fittings.
3. Stainless steel pins, bolts and instruction plate.
4. Improved fulcrum-lever design for higher
pressure pumping.
5. Available in 4 and 12 cubic inch /stroke positive
displacement models.
PORTABLE HYDRAULIC HAND PUMP
The manual hydraulic hand pump is When the hand pump is required, it is
mounted as an integral component of simply wheeled to the valve operator
most Emerson valve operating systems. and the flexible hoses are coupled to
However, in applications where space is the quick disconnect couplings on the
limited or economics and design dictate operator. The open or close selector
the hand pump may be deleted from the button is pushed and the pump operated
operator package and in its place are fitted in the normal manner to open or close the
quick disconnect couplings. The hand valve operator. Once the valve actuator
pump with reservoir is then mounted onto is in the desired position, the hoses are
a two wheel cart with flexible hydraulic disconnected and the portable pump
hoses and quick disconnect couplings returned to its storage location.
which provides portable manual operation
to any number of valve operators.

www.emersonprocess.com/shafer
Emerson Process Management
2500 Park Ave. West
Mansfield, OH 44906
Phone (419) 529-4311
FAX (419) 529-3688
[email protected]

Bulletin HP-240--01-16

You might also like