Scribd
Upload
366 views

Cimplicity Globalview Setup

This document provides instructions for configuring GlobalView software to publish CIMPLICITY CimView screens via a web browser or thin client. It involves installing GlobalView on the server, configuring the GlobalView server, and then setting up either a web browser or thin client on a client machine to access the published screens.

Uploaded by

juan parra
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
366 views

Cimplicity Globalview Setup

This document provides instructions for configuring GlobalView software to publish CIMPLICITY CimView screens via a web browser or thin client. It involves installing GlobalView on the server, configuring the GlobalView server, and then setting up either a web browser or thin client on a client machine to access the published screens.

Uploaded by

juan parra
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Proficy HMI/SCADA CIMPLICITY GlobalView

How to Configure GlobalView with CIMPLICITY

How it works
The GlobalView software is a mechanism by which you
can publish and interact with CIMPLICITY CimView
screens via a standard Internet Web Browser, or via the
GlobalView Thin Client.

Step 1: GlobalView Server Installation/Setup


1. Install CIMPLICITY 8.0 R2 or higher.
2. Install GlobalView from the CIMPLICITY installation DVD.
3. Reboot the computer
4. You must have a configured project at this point that you intend to publish via
GlobalView. If you do not have one you can simply use the Demo project provided
with the software.
5. Open CIMPLICITY Options via Start->Programs->Proficy HMI/SCADA CIMPLICITY
8.0->CIMPLICITY Options
6. Once CIMPLICITY Options is open navigate to the GlobalView tab. It should look
similar to the following:

7. Ensure that Start GlobalView Server at boot time is checked


8. Ensure that User built-in Web Server is also checked
NOTE: If you are intending to publish the CimView screens via an Internet Web
Browser then continue, otherwise please skip to Client Setup 2 to install the Thin
Client Software
9. Click on the Create Web Page button. A new dialog will open.

GE Intelligent Platforms, Inc.


10. The dialog will appear as follows:

11. Click on the Browse Screen button and navigate to the CimView screen that you
wish to display over the Web Server.
For Example:
C:\TESTPROJECT\screens\TestScreen.cim

12. Once a screen has been selected click on the Browse Page button, and create a
new Webpage. This is the HTML file that will be loaded at first that will display the
contents of the screen.
For Example:
C:\Program Files\GE Fanuc\Proficy CIMPLICITY\WebPages\WebView\test.html

NOTE:
It is suggested to create this page in the C:\Program Files\GE Fanuc\Proficy
CIMPLICITY\WebPages\WebView folder so it is easily accessible

13. Click on the OK button on the dialog to create the HTML file.
14. The next step is to start the GlobalView Server. To do this click on Start->Programs-
>CIMPLICITY Thin Client Server->Start CIMPLICITY Thin Client Server.

15. Now proceed to Step 2 to connect your Web Browser from a client machine to the
GlobalView server.
NOTE: Once a client is connected it is possible to manage/monitor the web
connections via the GlobalView Thin Client Administrator. This can be accessed via
the CIMPLICITY Options->GlobalView tab.
Client Setup 1: Accessing Published GlobalView Screens via a Web
Browser

NOTE: Make sure that the project that is display the CimView data is already running on the
GlobalView server before doing this section.

1. On a different node than the GlobalView Server, open up a Web Browser (i.e. Internet
Explorer) and connect to http://computername where computername is the name of
the Computer running the GlobalView Server.

NOTE: It is also possible to use the TCP/IP address in place of the Computer name.
2. The WebPage should connect and load similar to the following:
3. On the left hand Pane click on WebView. This should bring up a list of the files in the
WebView folder on the server.
4. Select the HTML File created in the Server Configuration step 12 and click on it.
5. A prompt should appear prompting to download an ActiveX control. If it does not show
up then the security on your browser is too restrictive and must be loosened up.
6. Once the control is loaded a dialog will appear prompting for a user name and a
password. This is the Windows username and password of the user on the GlobalView
Server. Provide a username and password and click Logon
7. The WebPage should now load and display the CimView session with the screen
loaded.

Client Setup 2: Accessing the GlobalView Server via the Thin Client

1. In order for the Thin Client to run on the node that is to be used as the Viewer, you must
first install the Thin Client software.
2. On the node where the GlobalView server is installed locate Thing Client installation
file. This is called ggw-client.exe. This file can be found in the following location:
3. C:\Program Files\GE Fanuc\Proficy CIMPLICITY\WebPages\GlobalView\
4. Copy the ggw-client.exe to the node that is to be the Thin Client and run it. It will
have a few steps in the installation process. Let it complete.
5. After the Thin Client installation is complete then reboot the computer
6. Once the restart is complete then run Start->Programs->CIMPLICITY Thin Client-
>CIMPLICITY Thin Client.
7. A dialog will open as follows:

8. For the Server Address type in the computer name or the TCP/IP address of the
GlobalView Server, and click the Connect button.
9. Another dialog will appear prompting for a username and password. This is the
Windows username and password for the GlobalView server. Put in the username and
password and click on the Logon button.
10. The software will now connect to the GlobalView server and a new window will appear
as follows:

11. Double click on the CimView icon. A dialog will appear that will prompt you to locate
the screen to display. Navigate to the screen you are interested in and select it and
then choose Open.

12. At this point the screen should display in the Thin Client Window and update with live
data from the GlobalView Server.

You might also like