Scribd
Upload
2K views

Rail Installation Tolerances

The document defines manufacturing tolerances for crane runways in three tolerance classes. Tolerance A specifies the allowable difference between the maximum and minimum track gauge dimension, Tolerance B specifies the allowable lateral straightness of rail heads from the crane runway length, and Tolerance C specifies the allowable straightness of rail centers from the crane rail length. Tolerance class 2 tolerances are recommended.

Uploaded by

jebrija
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

Rail Installation Tolerances

The document defines manufacturing tolerances for crane runways in three tolerance classes. Tolerance A specifies the allowable difference between the maximum and minimum track gauge dimension, Tolerance B specifies the allowable lateral straightness of rail heads from the crane runway length, and Tolerance C specifies the allowable straightness of rail centers from the crane rail length. Tolerance class 2 tolerances are recommended.

Uploaded by

jebrija
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

2.6.

2 Manufacturers tolerances

Tolerance Crane runways

Designation Diagram Tolerance class 1 Tolerance class 2 Tolerance class 3


2

for s 16 m: for s 16 m: for s 16 m:


S max

S min
Tolerance A A = 3 mm A = 5 mm A = 8 mm
S

of track gauge dimension s of crane for s > 16 m: for s > 16 m: for s > 16 m:
rails with reference to the rail centre A = [3 + 0,25 (s 16)] A = [5 + 0,25 (s 16)] A = [8 + 0,25 (s 16)]
and crane runway length A in mm A in mm A in mm
41409444.eps us e s in m us e s in m us e s in m

Smax = s + A S min = s A

Tolerance B
2000 2000
b

of the lateral straightness of the rail


head with reference to the crane
-B +B

runway length
B = 5 mm B = 10 mm B = 20 mm
Tolerance b 2000
b = 1 mm b = 1 mm b = 2 mm
of the lateral straightness with
b

reference to 2000 mm measured


41409544.eps
length (sample length) at any point
of the rail head
Position of a rail seen in plan

Tolerance C 2000
of the straightness with reference to
c

c
-C +C

the height of the crane rail centre


and crane rail length 2000 C = 5 mm C = 10 mm C = 20 mm
Tolerance c
c = 1 mm c = 2 mm c = 4 mm
2000
c

of the straightness with reference to


2000 mm measured length (sample 41409644.eps
measurement) at any point of the
crane runway Position of a rail seen in elevation
(longitudinal slope)

s
+E

Tolerance E E = 0,5/% x s E = 1/% x s E = 2/% x s


E

of the height with reference to in mm in mm in mm


perpendicular measuring points at us e s in m m us e s in m m us e s in m m
every point of the crane runway 41409744.eps Emax = 5 mm Emax = 10 mm Emax = 20 mm

Position of rails in relation to one another in


elevation (transverse slope)
20320004.tbl
Source: VDI 3576

Recommended: Tolerance class 2


2033522a.p65/0401

36

You might also like