Scribd
Upload
38 views

10MW/Nd: Key Features

This document provides specifications for the 10MW/Nd low frequency transducer from Beyma. It has a 250mm diameter with an 8 ohm impedance. Key features include good power handling of 350w AES, high sensitivity of 95dB, and an extended frequency response of 45-5000Hz. Technical specifications include Thiele-small parameters, mounting information, and graphs of frequency response and impedance.

Uploaded by

bk1313
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views

10MW/Nd: Key Features

This document provides specifications for the 10MW/Nd low frequency transducer from Beyma. It has a 250mm diameter with an 8 ohm impedance. Key features include good power handling of 350w AES, high sensitivity of 95dB, and an extended frequency response of 45-5000Hz. Technical specifications include Thiele-small parameters, mounting information, and graphs of frequency response and impedance.

Uploaded by

bk1313
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

10MW/Nd

10MW/Nd
LOW FREQUENCY
TRANSDUCER

KEY FEATURES
Good power handling (350 w AES)
Excellent sensitivity (95 dB)
Extended frequency response (45 - 5000 Hz )
Neodymium magnets
Aluminium basket

TECHNICAL SPECIFICATIONS
Nominal diameter 250 mm. 10 in.
Rated impedance 8 ohms DIMENSION DRAWINGS
Minimum impedance 7 ohms
Power capacity* 350 w AES
Program power 700 w
Sensitivity 95 dB 2.83v @ 1m @ 2p
Frequency range 45 - 5000 Hz
Recom. enclosure vol. 20 / 50 l 0.71 / 1.77 ft.3
Voice coil diameter 62.4 mm. 2.5 in.
Magnetic assembly weight 2.54 kg. 5.59 lb.
BL factor 15.7 N / A
Moving mass 0.043 kg.
Voice coil length 19.5 mm
Air gap height 10 mm
X damage (peak to peak) 30 mm

THIELE-SMALL PARAMETERS** MOUNTING INFORMATION


Overall diameter 261 mm. 10.28 in.
Resonant frequency, fs 49 Hz
Bolt circle diameter 243.5 mm. 9.59 in.
D.C. Voice coil resistance, Re 6 ohms.
Mechanical Quality Factor, Qms 9.95 Baffle cutout diameter:
- Front mount 230 mm. 9.06 in.
Electrical Quality Factor, Qes 0.33
- Rear mount 233 mm. 9.17 in.
Total Quality Factor, Qts 0.32
Depth 118 mm. 4.65 in.
Equivalent Air Volume to Cms, Vas 40.7 l
Volume displaced by driver 2 l 0.07 ft.3
Mechanical Compliance, Cms 238 mm / N
Net weight 3.1 kg. 6.82 lb.
Mechanical Resistance, Rms 1.35 kg / s
Efficiency, ho (%) 1.4 Shipping weight 3.6 kg. 7.92 lb.
Effective Surface Area, Sd (m2) 0.0350 m2 Notes:

Maximum Displacement, Xmax*** 7.5 mm *The power capacity is determined according to AES2-1984 (r2003) standard.
Program power is defined as the transducers ability to handle normal music program material.

Displacement Volume, Vd 263 cm3 **T-S parameters are measured after an exercise period using a preconditioning power test.

Voice Coil Inductance, Le @ 1 kHz 1.7 mH ***The Xmax is calculated as (Lvc - Hag)/2 + Hag/3.5, where Lvc is the voice coil length and Hag is the air gap height.

FREQUENCY RESPONSE AND DISTORTION FREE AIR IMPEDANCE CURVE

Note: on axis frequency response measured with loudspeaker standing on infinite baffle in anechoic
chamber, 1w @ 1m.

Polgono Industrial Moncada II C/. Pont Sec, 1c 46113 MONCADA - Valencia (Spain)
Tel. ( 34 ) 96 130 13 75 Fax ( 34 ) 96 130 15 07 http://www.beyma.com E-mail: [email protected]
077

You might also like