Scribd
Upload
311 views2 pages

Bomba Hid - Kobelt 7005

This document provides ordering information for a helm pump model 7005 that features adjustable volume delivery from 2-6 cubic inches per turn. It can be ordered with different finishes, shaft lengths, and configurations. An adaptor plate is also available to simplify installation on either side of a console. Ordering numbers are provided for the standard cast bronze and optional black epoxy finishes.

Uploaded by

edwin23a
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
311 views2 pages

Bomba Hid - Kobelt 7005

This document provides ordering information for a helm pump model 7005 that features adjustable volume delivery from 2-6 cubic inches per turn. It can be ordered with different finishes, shaft lengths, and configurations. An adaptor plate is also available to simplify installation on either side of a console. Ordering numbers are provided for the standard cast bronze and optional black epoxy finishes.

Uploaded by

edwin23a
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ORDERING INFORMATION

A With cast bronze finish (standard)


B With black epoxy finish
L With long shaft (for behind console mount)
N With short shaft (for through console mount)
P With porting block only (no lock valve)
T With tapered shaft
V With vent plug

Note: An adaptor plate to simplify installation of


MODEL 7005
7005 the helm pump is available. It can be installed on
either side of the console.
2-6 in VARIABLE
Ordering number:
DELIVERY 7005-0011A (cast bronze finish)
7005-0011B (black epoxy finish)
HELM PUMP

This pump features adjustable volume in a


compact design. Adjustment from 2-6 in
per turn is easily accomplished from the
outside. A ball bearing and two thrust
bearings provide smooth operation and
long life. A lock valve installed on the
back of the helm pump prevents rudder
feedback and also allows installation of
multiple control stations. The pump is
normally supplied in its die cast bronze
finish. It can, however, be ordered in a
black epoxy finish.

Materials: Housing and rotor are die-cast


silicon bronze. Pistons and pintol are
hardened and ground steel. Pump shaft
and hardware are stainless steel.

Max. working pressure: 1000 psi (69 bar)

Weight: 23 lbs. (10.4 kg)

05/2014
DIMENSIONS
DIMENSIONS AND PARTS
MODEL 7005
7005

Thread size for


Helm lines is #6 ORB 3/8 NPT fitting
Connecting holes is NPT
Filler hole is 5/8 UNF

05/2014

You might also like