Scribd
Upload
207 views1 page

Electric Log PDF

The Elog probe is a water well logging probe that combines shallow, medium, and deep resistivity measurements with self-potential readings. It uses a low-frequency bi-directional electric current from a source electrode that returns through the formation to a cable above an insulated bridle, and potential differences are measured on probe electrodes relative to a surface reference. These measurements are converted to apparent formation resistivities within the probe and digitally transmitted to the surface. Key features include digital downhole measurements, a constant-power current source for measurements over 4 decades without manual switching, and optional gamma and temperature sensors.

Uploaded by

Ayu Fadhilah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
207 views1 page

Electric Log PDF

The Elog probe is a water well logging probe that combines shallow, medium, and deep resistivity measurements with self-potential readings. It uses a low-frequency bi-directional electric current from a source electrode that returns through the formation to a cable above an insulated bridle, and potential differences are measured on probe electrodes relative to a surface reference. These measurements are converted to apparent formation resistivities within the probe and digitally transmitted to the surface. Key features include digital downhole measurements, a constant-power current source for measurements over 4 decades without manual switching, and optional gamma and temperature sensors.

Uploaded by

Ayu Fadhilah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

R OB E R T S O N

G E O LO G G I N G
Borehole Logging Systems PROBES 7

Electric Logging Probe (ELOG)


The Elog is the classic water-well combination Principle of Measurement:
probe combining shallow, medium and deep A low-frequency bi-directional electric current
penetrating resistivity measurements with from a source electrode on the probe returns
self-potential (SP). through the formation to the cable armour above
an insulated bridle. Potentials due to this current
flow are measured on various sense electrodes
on the probe with respect to a voltage reference
fish normally located at the surface. These
measurements are converted to apparent
formation resistivities within the probe and
digitally transmitted to the surface.

probe specification

> Features > Operating Conditions


Digital down-hole measurement avoids Borehole type: open-hole, water-filled
errors due to cable effects
Constant-power down-hole current source give > Specifications
4 decades of measurement without manual
range switching Diameter: 44mm
Length: 2.70m or 2.94m (with 8 and 32 option)
Weight: 9.8kg
> Measurements Temperature: 0-70C (extended ranges available)
16 Normal resistivity Max. pressure: 20MPa
64 Normal resistivity Resistivity range: 1 to 2,000 ohm-m
Single-point resistance
Self-potential SP
Natural-gamma > Sales Information
Temperature Probes:
Optional 8 and 32 Normal resistivity I002072 Electric logging probe with natural
gamma and temperature
> Applications I002111 - including 8 and 32 normal resistivity
I002721 Elog/Glog test box (Mk2)
Water
I015464 Gamma test blanket
Determination of water quality
Indication of permeable zones and porosity
Minerals/Engineering
Bed-boundary positions
Strata correlation between boreholes

[email protected] www.geologging.com

You might also like