01 09.11.

10 HA
Rev. Issued Description Made by Chk'd Disc. Proj. Client
date by appr. appr. appr.
Contractor:

Client: Contract No.:

75348-EPC-NSBU

Project no: Project title:

G579 EKOL ACCOMMODATION PLATFORM - TOPSIDES & BRIDGES
Document sub-type: Platform(s): Area(s): System(s): DFO code: Tag(s):

EKOL
Document title:

Document no.: Rev.: Page:

EKOL-SMO- 01 1 of xx
 Procedure
SmartPlant Operation Procedure- Telecom

TABLE OF CONTENTS
1. PURPOSE..............................................................................................................................3
2. SOFTWARE VERSIONS........................................................................................................3
3. DATABASE ............................................................................................................................3
4. deliveraBLES .........................................................................................................................4
4.1 ENGINEERING & DESIGN DELIVERABLES ...................................................................... 4
4.2 Format and Media ............................................................................................................... 5
4.3 Audit .................................................................................................................................... 5
5. Work Flow philosophy and Split of Scope...............................................................................6
5.1 Split of Scope between SMOE & SEMCO Maritime............................................................. 6
5.2 Progress Design Stages Details .......................................................................................... 9
6. General SPI engineering task...............................................................................................11
6.1 Log in to SPI- Telecom .......................................................................................................11
6.2 SPI Modules .......................................................................................................................12
6.3 Flow of Activities for Telecom Design .................................................................................13
7. Creation of Telecom panels in reference /DOmain explorer................................................17
8. INSTRUMENT INDEX MODULE..........................................................................................48
8.1. Supporting Tables for Telecom...........................................................................................48
8.2. Working with Old Equipment...............................................................................................49
8.3. Set Telecom Device Type Profile Default............................................................................49
8.4. Create a Telecom Field Tag ...............................................................................................54
8.5. Duplicate a Telecom Field Tag ...........................................................................................58
8.6. Procedure for deleting Tag .................................................................................................58
8.7. Creating Loop.....................................................................................................................59
8.8. Duplicate a Loop Number ...................................................................................................61
8.9. Associating Instrument Tags with Loop Numbers ...............................................................62
8.10. Edit a Typical Loop .............................................................................................................66
8.11. Delete a Typical Loop .........................................................................................................67
8.12. Example of Creating a Telecom Conventional Field Device................................................68
9. Wiring MODULE..................................................................................................................74
9.1. Creating Wiring Scheme.....................................................................................................75
9.2. Associate a Symbol with an Item ........................................................................................76
9.3. Terminal Strips ...................................................................................................................78
9.4. Updating Connection Data..................................................................................................97
9.5. View Cable Connection Destinations ..................................................................................97
9.6. Trace a Signal in a Point-to-Point Wiring Diagram ..............................................................99
9.7. Cross Wiring.....................................................................................................................100
9.8. Auto- Wiring......................................................................................................................108
9.9. Creating Terminal Strips with Main Distribution Frame .....................................................118
10. enerating telecom reports common tasks ........................................................................... 122
11. Appendix ............................................................................................................................ 128

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 2 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

1. PURPOSE

This document is intended as a general guide to the SPI-Telecom working procedure in respect of
Smart Plant Instrumentation. It sets out the various requirements including a definition of the
relationship between SPI database, Telecom Equipment and Field device parameters and the
procedural order of working. The document extensively addresses aspects of work flow and the
working relationship including data location definitions, sequence of working, responsibilities,
change identification and control, implementation in the SPI Telecom. The intention is to provide
guidance during project start-up to allow the SPI related interfaces with SEMCO to operate
efficiently for the duration of the project as well as to describe how SMOE /SEMCO shall work with
COP Global setup for SPI.

2. SOFTWARE VERSIONS
The software version used for this project is listed below. Procedure for backup may change as
the software are updated. Refer to Smartplant Administration modules for respective software if
the version shown below does not match.

SPEL: 06.00.02.50 (v2009 SP2 HF13)

SPEM: 06.01.03.19 (v2009 SP3)
SPI: 09.00.01.0128 (v2009 SP1 HF7)
SPPID: 06.00.00.0069 (v2009 SP2 HF4)
SPF: 04.03.01.05 (v2009 SP1)

3. DATABASE
Each SmartPlant Software that requires a database has been created and located on the
following computer. Data on this database are archived on a regular basis.

DATABASE INSTANCE LOCATION NODE ADDRESS

SPF -LATER- SMOEDB01 172.16.99.72
SPI ORCL4 SMOEDB01 172.16.99.72

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 3 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

4. DELIVERABLES
4.1 ENGINEERING & DESIGN DELIVERABLES

The EKOL project deliverables are according to the DFO Matrix Ver. 8 as follows.

Sr.No DFO Name Doc Sub SPI Remark

Code Type Type Requirement
1 A1.07a Cable Index N/A N/A SMOE
2 A1.14a Data Sheets A02 DS SEMCO Excel
Note.1 Spreadsheet(Note-1)
3 A4.06b Single Line Diagrams - A03 TG SEMCO Part of Block diagram
Telecom
4 A4.08d Terminal Block and A03 TB SEMCO
Connection Diagrams -
Telecom
5 A4.10b Wiring Diagrams - A03 TB SEMCO/SMOE
Telecom Note.2

Note.1- Specification Sheets/ Data Sheets shall be in NORSOK Excel Spreadsheet.

Note.2- Wiring termination diagram from System Equipment/ Cabinet to MDF shall be
Responsible by SEMCO and SMOE shall be responsible from the respective MDF
to Field Devices.

It is the responsibility of both SMOE and SEMCOMaritime to create the profiles of all Main Equipment,
Field Equipment, sensors,MDF,IDF,JB and etc. ;in the telecom explorer except inside the seed
Database what COP was created. The following templates are created as a set of standard
deliverables to be generatedfrom the EKOL SPI database for ALL the Telecom Systems.

For uniformity these Design deliverables shall be used by SMOE and SEMCO Maritime.

Telecom Block and Connection Diagrams

Telecom Wiring Diagrams
Telecom Instrument Index
Cable Index
Cable Schedule

Besides these main deliverables, it shall need to generate Engineeringdeliverable reports

from the EKOL SPI database .

Telecom Device Types

Telecom Equipment List
Telecom Field Equipment Lists
Telecom Equipments/ Field Devices Tag Lists
(Note: All naming conventions are to be in accordance with COPENS.
Profiles of Telecom Cables, Junction Box and Telecom Panels

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 4 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Reports are revision controlled, meaning they can compare current data with a storedset of data.
The report will then highlight all the changes between the two revisions. For details, please refer to
Chapter 10: Generating Telecom Common Reports Tasks.

4.2 Format and Media

The Copies of the SMOEsproduction database and supporting files shall be delivered on
electronic media to COPInformation management team and the facility.

4.3 Audit

1. COP may request a copy of the database for internal or third-party auditing before
accepting the final database.
2. If an audit is performed, the database shall not be accepted as a deliverable until all items
identified in the audit are reviewed and accepted or corrected.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 5 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

5. WORK FLOW PHILOSOPHY AND SPLIT OF SCOPE

5.1 Split of Scope between SMOE & SEMCO Maritime

The above split of scope , roles and responsibilities relating to the SPI shall be according to
the DFO requirement .The split of scope described here is one possible approach and final
procedures for EKOLSPI Telecom will be agreed, documented and establishedat project
commencement.

The nature of most project setups isi that parallel SPI working (SMOE
SMOE/SEMCO) will be
thenorm, particularly
ularly in the area of panels and wiring. This requires careful control of
workingareas between the various parties.

It is in the responsibility that all the project users which are assigned to workare well skilled
and d trained to work with SPI v2009.SPI
v2009 project
roject users shall perform the following activities in
SPI, but not limited to:

Input all data to ensure the SPI standard functionality.

Input data for generation of deliverables.
Input data for interfaces and data issues
Input As Built data

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 6 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Note:
Data completeness
ompleteness and/or data accuracy within the EKOL is not the responsibilityof the
Domain Controller.. Each useris
is responsible for data generation andquality using SPI.

SMOE would expect that SPI browsers are ready for the start of a project. At this point a
fullset of browser reports are to be taken and archived at revision P0 as a base reference.

During the initial detail design stage, as each area or item of the plant is authorised for
SMOE/ SEMCO design,design configuration will proceed based on the ass-of-the-moment SPI
database.

A good interface must exist between the various parties. The intention is that all parties
willinteract constantly, generally via informal discussion, to ensure that project benefits from
agood exchange of information.Attached
information. Organization chart provides for close cooperation
between SMOE and SEMCO.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 7 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Ad-hoc changes in SPI by COP or others should only impact on design by SMOE or SEMCO
if the affectedarea has already been authorised for design and actual work in the SPI
databasehas started. If configuration has already taken place the following may apply:

Instrument Index Content

The differences may only be apparent when the next browser revision comparesare
undertaken. Results of the compare will be analysed and differences identifiedand
appropriate actions agreed.

Panels and Wiring

Some detail changes (e.g. moving a tag to another multi-core cable pair, changingthe size of
a multi-core cable) may be obvious when analysing panel and wiringviews.

SPI data freeze points will be agreed as part of the detail design phase. These will be
themajor reference points for change identification. Freezes will be both hardware
andsoftware and will not necessarily occur at the same time.

History Tracking

SMOE recommends that History (Audit Trail) is turned on after first issue of the Instrument
Index. Audit Trail can be used for change management to show changes between project
milestone dates such as freeze dates.
Note: Only the SPI System Administrator user has the rights to configure this feature.

Activity Tracking

SMOE recommends that Activity Tracking is turned on for projects where there is shared SPI
database access across 2 or more companies. Activity Tracking provides logon/off and
session duration details for individual users and overall usage statistics of the SPI system.

Note: Only the SPI System Administrator user has the rights to configure this feature.

Revision Management

SMOE recommends using the SPI Revision Management functions for selected report
documents relating to the tags and wiring. Therefore, the SPI per-document revision
management setting is also recommended by SMOE from the Tools menu as shown in
screen shot.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 8 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

5.2 Progress Design Stages Details

COP develop SPI seed database. This is the he inititial D

Data Archive Point-P0. SPI
telecom configuration will proceed based on the as as-of the-moment SPI data
status.
SMOE develop tagging/ profiles on field devices , in Reference Explorer
Explorer.
SEMCO build standardised equipment cabinet and allocate Tagging inSPI
Reference
rence Explorer.
Explorer
SEMCO create specific panels / tagging (any SEMCO S Supplied field devices) in
SPI Reference Explorer.
SMOEcreate
create single and multicore field cables.
SEMCO create specificsingle and multicore system cables cables.
SEMCO add equipment terminal stripsstrip and configure cross wiring for field cables
in MDF.
SEMCO to generate connection report from the Connection Window and Panel
Strip Report from the Cross Wiring Window.
SPI data freeze point P1will
will be agreed as part of the detailed design phase. This
will be in accordance with the established/agreed project standards and the
major reference for change identification. At this point, SPI
SPI-Telecom must cease
work in this area (approximately one or two days ) until the a set of Instrument,

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 9 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

wiring browsers have been archived by SMOE, thus capturing the design freeze
data.
SMOE connect field cables to equipment terminals from MDF assigned by
SEMCOandand generate wiring diagram.
SEMCOconconfigure wiring diagrams from the System Cabinet to MDF and
generate wiring diagram.
Formal Archive /Review Point P2 will be agreed as part of the detailed design
phase by COP/SMOE/SEMCOto review extract wiring data and panel layout
information.The resulting archive comparison report will indicate the differences
information.The
between the freeze points.
points
SMOE/ SEMCO to generate Loop Diagrams/ Enhance Reports for each system.

Note: SMOE recommand to creation of devices, panels and connection device only in
reference explorer.

Attached picture provides flow chart for the procedures.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 10 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

6. GENERAL SPI ENGINEERING TASK

6.1 Log in to SPI- Telecom

A. On the Windows Start menu, point to Programs, point to Intergraph SmartPlant
Instrumentation, and then click SmartPlant Instrumentation.
B. On the Logon Information dialog box, type XXXXX as both your user name and password.
C. On the Open dialog box, expand the TELECOM domain hierarchy to the EKOL / 8/870 / to
the Unit Level as indicated below.

D. On the Open dialog box, expand the TELECOM domain hierarchy to the EKOL, as
indicated below.
E. Click OK to open SmartPlant Instrumentation.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 11 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

6.2 SPI Modules

The SPI modules relevant to the SPI Telecom are:

Administration Module: tag naming convention, users & groups etc.
Instrument Index Module:tag names and tag properties etc.
Wiring Module: Wiring design on panels, Plug-and-socket boxes, Field devices and their
cables
Loop Drawings Module:Create loop drawings that include data retrieved from the database
and if required, from an external file.

The Administration Module is used by the system and project administrators to set up theproject
conventions (e.g.: tag and loop number structure, plant area and unit hierarchy) andallocate access
to engineers and designers into SPI. Where additional fields are required toenter data not normally
covered by SPI a User Defined Field (UDF) can be utilized. The Administration module also
contains a History (module, which records changes during theproject).
The Instrument Index Module is where all loop and tag numbers are compiled and normal index
parameters are entered. All information is stored against tag numbers.
The Browser Module enables the user to create views of data from all of the engineering modules
in which they are able to edit data. User Defined Fields for modules other than the Instrument
Index Module are defined within the Browser Module.
The Wiring Module allows the creation of all instruments (field devices), cabling, racks, and
junction box terminations throughout the project. Standard cables, junction boxes, racks, and
instrument terminations are created within SPI. These are used to generate all instruments wiring
deliverables within the project.
The Loop Diagram Module enables the generation of complete instrument loop diagrams using
data from the above modules and downloading it into a drawing file. Loop diagrams can also be
produced using Smart loop or Enhanced Smart loop, which creates loop diagrams within SPI. Loop
diagrams produced can be edited directly within SPI.

* Note: The Administration Module shall be described details in SPI General Procedure.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 12 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

6.3 Flow of Activities for Telecom Design

The following is a suggested flow of activities that will help to design the telecommunication
system in EKOL project.
The first step in telecom design is to create the reference telecommunication
telecommunication equipment.Then, in
the Instrument Index module, you define telecommunication device type
types and field equipment
In the second step, create your telecom tag numbers based on the telecom device type that you
defined. At this stage, you can generate
generate various Instrument Index reports as needed.
Once all the supporting table data is entered and all the telecom tags are created, you start
creating yourtelecom
telecom panels and telecom equipment based on the reference equipment and
reference panels you createdpreviously.
createdpreviously. Make the required connections among the your
telecom equipment. You can then generateelecom wiring reports as needed.
We recommend the following flow of activities:

1. In the Reference Explorer,

Explorer create the following reference equipment:

a. Telecom
ecom cables with appropriate configurations
b. Telecom device panels
c. Telecom equipment panels with or without their internal equipment
d. Telecom equipment items such as amplifiers, switchboards, hubs, and so forth that serve
as the internal equipmentt of telecom panels

REFERENCE EXPLORER

Choose Telecom Panels

1. Field Devices
2. Junction Boxes
3. Splice Panels
4. Patch Panels
5. Distribution Frames
6. Equipment Cabinets

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 13 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

2. Start the Instrument Index module and define the following:

a. A telecom device panel type and device type profile defaults for telecom tags
b. Communication line numbers
c. Field equipment classification
d. Signal levels
e. Generate
nerate Instrument Index telecom reports if needed (telecom devices and various
telecom table reports).
f. Create the telecom tag numbers that you require
g. Create plant equipment panels with the necessary hardware shelves or racks.
h. Create the telecom equipment items that you require by copying the reference items.
i. Define network classes.

The screen shots that related to Instrument Index are as follows:

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 14 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

1. AA-Acoustic
Acoustic Alarm, Buzzer,
Telephone Horn
2. AE-Access
Access Point Ex
3. AP-Access
Access Point
4. CA-Camera
Camera
5. CP-Control
Control Panel, OP, S
Station,
Access Unit
6. CU-Computer
Computer Unit (PC & Server,
Etc.)
7. FL-Flash
Flash Light
8. IO-Input/Output
Input/Output Outlet/Socket
9. LS-Loudspeaker
Loudspeaker (You can create
separate 15 W, 10W, 6W etc. based on
your need)
10. MI-Miscellaneous
Miscellaneous
11. MO-Monitor
Monitor
12. MU-Microphone
Microphone Unit
13. OS-Operator
Operator Station
14. RA-Ante
Antenna (Radio link,
UHF/VHF, Satellite)
15. SE-Sensors(Cat.13
Sensors(Cat.13 Computer
Equipment)
16. SU-Sensors
Sensors Ex((Cat.13 computer
Equipment)
17. SU-Sensors(Cat.80
Sensors(Cat.80
Communication)
18. TL-Telephone
Telephone
19. TM-Terminal
Terminal
20. TS-Radio
Radio Units
21. VR-Video/
Video/ Audio
Recorders/Players

Note: You can add device types

accordingly reference from
COPENS.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 15 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

New Tag

Tag Properties

Duplicate Tag

New Loop
Loop properties

Dupl. Loop

Ren.Loop

Browse

Associate

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 16 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

3. In the Wiring Module, create the followings devices, panels and cables.

a. Make all necessary connections.

b. Generate the Telecom reports in the Wiring module.

Panels belonging to a number of different categories, such as junction boxes, MDFand so

forth.
Plug-and-socket boxes,
Field devices and their cables
Multi-input devices with either terminal or plug-and-socket connections
Terminal strips and terminals

Cables based on shipped and user-defined configurations that include cable sets (pairs,
triads, and soforth), wires, and connectors

7. CREATION OF TELECOM PANELS IN REFERENCE /DOMAIN

EXPLORER

We will use the Domain Explorer to access telecom panels and equipment. Typical telecom
equipment, that is, telecom reference equipment, is organized in the ReferenceExplorer.

Telecom equipment is organized in several different folders in the Reference Explorer:

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 17 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Telecom Panelscontains
contains telecom panels arranged according to their types:
Field Devicesholds
holds plug-and-socket
plug boxes and conventional
ventional field device panels.
Junction Boxes
Splice Panels
Patch Panels
Distribution Frames
Equipment Cabinets
holds
holds PA cabinets, PABX cabinets, hub cabinets, intercom cabinets,
and miscellaneous cabinets for video
video and entertainment systems)
Old Equipmentcontains
contains telecom panels created prior to Version 7. Note ththat you cannot
create additional panels in this folder, but you can add new child items, modify the
properties of the existing
Panels by Manufacturerarranges
Manufacturer arranges telecom panels according to their manufacturers.
Telecom Equipment
lists telecom panels and equipment
ent classified according to their
types.
*** Note that the items in this folder are for viewing only.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 18 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Junction Box

Plug and Socket Junction Box

Main Distribution Frame

Cabinet

Device Panel

Device Panel (Plug-and Socket Device Panel)

Smart Plant Instrumentation allows you to create a number of Telecom Panels that you can use
for various purposes. Once you have created the Telecom panels you require, you can create
the appropriate equipment for each Panel in the Domain Explorer or the Reference Explorer.
If you are creating Telecom panel that is going to have a frequently used configuration, we
recommend that you create it in the Reference Explorer. Reference telecom panels facilitate
fast creation of plant equipment cabinets by copying an existing cabinet configuration from the
Reference Explorer to the Domain Explorer. However, if you want to create an equipment
cabinet that does not have a configuration that you intend to use frequently, we recommend that
you create it in the Domain Explorer and in the <unit> where it is to be physically located. This
is helpful when filtering the panels in the current <unit>.

Panels can contain a whole range of sub-entities. These sub-entities can be terminal strips,
racks, wiring equipment, and so forth. There is a lot of flexibility in creating a panel hierarchy.
There is no rigid structure like panel terminal strip terminal that limits your wiring design.
You can create REFERENCE TELECOM PANELS based on various wiring structures as you
require.

Example 1:

Panel (any Panel except for a device Panel)

Panel

Device Panel

Terminal Strip

Terminal

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 19 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Example 2:

Panel

Rack
Slot
Wiring Equipment

Terminal Strip

Terminal

Example 3:

Panel (any panel except for a device panel)

Rack

Slot
Wiring Equipment

Terminal Strip

Terminal Strip

Example 4:

Panel
Wiring Equipment

Channel

Terminal Strip

Terminal

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 20 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Example 5:

Panel
Wiring Equipment

Terminal Strip

Channel

Terminal

Example 6:

This example shows the wiring items that can exist in the Panels by Location folder.

Location node

Panel
Device Panel (Conventional, plug-and-socket, or multi-input

Rack

Wiring Equipment

Connector

Channel

Terminal Strip

Example 7:

This example shows the items that can exist in the Cables folder.

Cable

Connector
Pin

Cable Set
Wire

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 21 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

7.1 Creating
eating Telecom Equipment Cabinets-PABX Cabinet

This procedure explains how to create a rack in a PABX (private automatic branch exchange)
cabinet.1.In the Domain Explorer, expand the Telecom Panels folder, which is located within the
Panels by Category folder.
older.

1. In the Reference/ Domain Explorer,

Explorer expand the Telecom Panels folder, which is located
within the Panels by Category folder.

Under Equipment
Cabinets

1. PA Cabinet
2. PABX Cabinet
3. Miscellaneous Cabinet
4. Hub Cabinet
5. Intercom Cabinet

Note: Intercom system will

not use and exclude in the
procedure.

2. Expand the Equipment Cabinets folder and then right-click

click a PABX cabinet where you want
on create a rack.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 22 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

3. On the shortcut
tcut menu click New > PABX Rack.
Panel
Panel: To be filled in
Type
Type: To be filled in
Manufacturer
Manufacturer: To be filled in
Model
Model: To be filled in
Dimension
Dimension: To be filled in
Area Classification
Classification: To be
filled in
Location
Location: Please choose from
Drop-Down List
Mounting
Mounting: TNILBA
Backplane
Backplane: TBA
PABX category
category: To be filled in

4. On the Rack Properties dialog box, on the General tab, under Rack
Rack, type the name of the
new rack.
5. Type a brief description as you require.
6. Enter the rack sequence in its parent cabinet.
7. Click Slots to add slots to the current
c rack.
8. On the Batch Slot Creation dialog box, type the number of new slots that you want to add
in the new rack.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 23 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

9. Do the following to define the slot numbering:

a. Type a prefix for the slot name.
b. Enter a value in the Start from number and Increment by fields.
ields.
c. Click OK to add the new slots and to return to the Rack Properties dialog box.

Create a Switch

The SPI allows you to create switches after adding a rack to a PABX cabinet. . Once you have
created a switch, you can add a switch port and a connector.
connect

1. In the Domain Explorer, expand the Telecom Panels folder, which is located within the
Panels by Category folder.
2. Expand the Equipment Cabinets folder to display the existing PABX cabinets.
3. Double-click
click a PABX cabinet to display the existing PABX racks.
ra
4. Right-click
click a PABX rack to which you want to add a new switch and then on the shortcut
menu, click New > Switch.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 24 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

5. On the New Wiring Equipment dialog box, type a name for the new switch and click OK.
6. On the Wiring Equipment Properties Switch dialog box, on the General tab, under Name,
accept or type a name of the new switch.
7. Select the Double width check box if the amplifier occupies a double width slot or position.
8. In the Details group box do the following as you require:
a. Type a description.
b. Select an amplifier type, model, and manufacturer. If the required value is not available
on the list, click to define a new one.
c. Enter a sequence if you need to define the switch sequence.
9. Click the Category Properties tab.
10. Revise and modify category property values as you require. Click the value for each
property and modify it as needed.
11. Click OK to accept your settings and close the dialog box.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 25 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Add a Connector to a Switch

This procedure explains how to add a connector to a switch. In the SmartPlant Instrumentation
Explorer, connectors are child items of switches and amplifiers.

1. In the Reference/Domain
Domain Explorer,
Explorer expand the Telecom Panels folder, which is located
within the Panels by Category folder.
2. Expand the Equipment Cabinets folder to display the
he existing PABX cabinets.
3. Double-click
click a PABX cabinet and then a PABX rack to display the existing switches.
4. Right-click
click a switch to which you want to add a new connector and then on the shortcut
menu, clickNew
New > Connector.
Connector

5. On the Connector Properties

Propert dialog box, type a connector name.
6. Select a connector type. Click to add new connector types to this list.
7. Define the connector as male or female.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 26 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

8. Select a panel side for the connector.

9. Click OK.

Add a Switch Port

This procedure explains how to

t add a port to an existing switch.
1. In the Reference/ Domain Explorer,
Explorer, expand the Telecom Panels folder, which is located
within the Panels by Category folder.
2. Expand the Equipment Cabinets folder to display the existing PABX cabinets.
3. Double-click a PABX cabinet and then a PABX rack to display the existing switches.
4. Right-click
click a switch to which you want to add a new port and then on the shortcut menu,
click New > Switch Port.
Port
5. On the General tab of the Switch Port Properties dialog box, type a name for the new
switch port.
6. Click the Associate Symbols tab to associate a symbol with the current switch port. The
software will use this symbol when generating a report in the Enhanced Report Utility.
7. Click OK.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 27 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Create a Switch Channel

After creating a switch

ch port, you can add a channel to this port.1.
1. In the Reference/ Domain Explorer, expand the Telecom Panels folder, which is located
within the Panels by Category folder.
2. Expand the Equipment Cabinets folder to display the existing PABX cabinets.
3. Expand the
e hierarchy of a PABX cabinet and then double-click
double click a PABX rack, switch, and
then a switch port.
4. Right-click
click a switch port to which you want to add a new channel and then on the shortcut
menu, click New > Switch Channel.
Channel

5. On the General tab of the Channel Properties dialog box, type a name for the new channel.
6. Type a brief description if required.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 28 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

7. Enter an appropriate sequence of the current channel in its parent switch port.
8. Click the Associate Symbols tab to associate a symbol with the current channe
channel. The
software will use this symbol when generating a report in the Enhanced Report Utility.
9. Click OK to accept your settings and close this dialog box.

Create and Associate a Telephone Number

This option allows you to create a telephone number in a PABX

PABX cabinet and automatically
associate it with a switch channel.
1. In the Reference/ Domain Explorer, expand the Telecom Panels folder, which is located
within the Panels by Category folder.
2. Expand the Equipment Cabinets folder to display the existing PABX cabinets.
3. Expand the hierarchy of a PABX cabinet and then double-click
double click a PABX rack, switch, and
then a switch channel.
4. Right-click
click a switch channel and create a terminal if there is there is no terminal under the
current switch channel.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 29 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 30 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Right-click the Telephone folder and then on the shortcut menu, click New > Telephone.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 31 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

7.2 Creating
ing Telecom Equipment Cabinets- PA Cabinet

This procedure explains how to create a PA cabinet.

1. In the Domain Explorer,
Explorer double- click the Panels by Category folder and expand the
Telecom Panelsfolder.
Panels
2. Right-click the Equipment Cabinets folder and then on the shortcut menu click New >
PA Cabinet.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 32 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

3. On the PA Cabinet Properties dialog box, on the General tab, under Panel, type the
name of the new cabinet.
cab

4. Select
elect the required values from the Type, Manufacturer, Model, Area
classification,and
andLocationlists.
lists. If the required value is not available, click next to the
relevant list arrow to open the appropriate supporting table.
5. Under Dimensions,
Dimensions type a value for the cabinet dimensions if needed.
6. Under Mounting,
Mounting type NIL.
7. Under Backplane,
Backplane type a NIL.
8. Select the Set as intrinsically safe check box if this cabinet has intrinsic safety
certification.
9. Click the Associate Symbols tab to associate a symbol with th the current cabinet. The
software will use this symbol when generating a report in the Enhanced Report Utility.
10. Click Revisions to manage the revisions of the new cabinet if needed.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 33 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

11. Click OK to accept your definitions for the new cabinet and close this dialog box.

Create an Amplifier

SmartPlant Instrumentation allows you to create a number of equipment cabinets that you
can use for various purposes. Once you have created the cabinets you require, you can
create the appropriate equipment for each cabinet.
You can create an equipment cabinet in the Domain Explorer or the Reference
Explorer. If you are creating an equipment cabinet that is going to have a frequently
used configuration, we recommend that you create it in the Reference Explorer.
Reference equipment cabinets facilitate fast creation of plant equipment cabinets by
copying an existing cabinet configuration from the Reference Explorer to the Domain
Explorer. However, if you want to create an equipment cabinet that does not have a
configuration that you intend to use frequently, we recommend that you create it in the
Domain Explorer and in the <unit> where it is to be physically located. This is helpful
when filtering the panels in the current <unit>.

1. In the Domain Explorer, double-click the Panels by Category folder and expand the
Telecom Panelsfolder.
2. Expand the Equipment Cabinetsfolder and then right-click a PA cabinet to which you want
to add anamplifier.
3. On the shortcut menu click New > Amplifier.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 34 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

4. On theNew Wiring Equipment dialog box, type a name for the new amplifier and click OK.

5. On theWiring Equipment Properties Amplifier dialog box, on the General tab, under
Name, accept or type a name of the new amplifier.

6. Select the Double width check box if the amplifier occupies a double width slot or position.
7. In the Details group box do the following as you require:
a.Type a description.
b.Select an amplifier type, model, and manufacturer. If the required value is not
available on the list,click to define a new one.
c.Enter a sequence if you need to define the amplifier sequence.
8. Click the Category Properties tab.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 35 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

9. Revise and modify category property values as you require. Click the value for each property
and modify it as needed.
10. Click OK to accept your settings and close the dialog box.

Addan Amplifier Channel to an Amplifier

This procedure explains how to add a connector to an amplifier.

1. In the Domain Explorer, right-click an amplifier to which you want to add an amplifier
channel.
2. On the shortcut menu click New >Amplifier Channel.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 36 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

3. On the New Wiring Equipment dialog box, under Name,, type an amplifier channel name
and click OK.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 37 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

4. On the Wiring Equipment Properties dialog box, define the properties that you require.

5. Click OK.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 38 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Adda Connector to an Amplifier

1. In the Domain Explorer,

Explorer right-click
click an amplifier to which you want to add a connector.

2. On the shortcut menu click New > Connector.

3. On the Connector Properties dialog box, type a connector name.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 39 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

4. Select a connector type. Click to add new connector types to this list.
5. Define the connector as male or female.
6. Select a panel side for the connector.
7. Click OK.

7.3 Creating Telecom Panels-Miscellaneous Cabinet

Miscellaneous cabinets are intended for video equipment, entertainment systems, and so
forth. After creating a miscellaneous cabinet, you can add a rack and a terminal strip.
1. In the Domain Explorer, double- click the Panels by Category folder and expand the
Telecom Panelsfolder.
2. Right-click the Equipment Cabinets folder and then on the shortcut menu click New >
Miscellaneous Cabinet.
3. On the Miscellaneous Cabinet Properties dialog box, on the General tab, under Panel,
type the name of the new cabinet.
4. Select the required values from the Type, Manufacturer, Model, Area classification, and
5. Locationlists. If the required value is not available, click next to the relevant list arrow to
open the appropriate supporting table.
6. Under Dimensions, type a value for the cabinet dimensions if needed.
7. Under Mounting, NIL.
8. Under Backplane, type a NIL.
9. Select the Set as intrinsically safe check box if this cabinet has intrinsic safety certification.
10. Click the Associate Symbols tab to associate a symbol with the current cabinet. The
software will use this symbol when generating a report in the Enhanced Report Utility.
11. Click Revisions to manage the revisions of the new cabinet if needed.
12. Click OK to accept your definitions for the new cabinet and close this dialog box.

For all network including

7.4 Creating Telecom Panels-Hub Cabinet FO distribution

This procedure explains how to create a hub cabinet. After creating a hub cabinet, you can
add hub equipment.
1. In the Domain Explorer, double- click the Panels by Category folder and expand the
Telecom Panelsfolder.
2. Right-click the Equipment Cabinets folder and then on the shortcut menu click New >
Hub Cabinet.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 40 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

3. On the Hub Cabinet Properties dialog box, on the General tab, under Panel, type the
name of the new cabinet.
4. Select the required values from the Type, Manufacturer, Model, Area classification,
and Locationlists. If the required value is not available, click next to the relevant list
arrow to open the appropriate supporting table.
5. Under Dimensions, type a value for the cabinet dimensions if needed.
6. Under Maximum number of racks, type a value to set the maximum number of racks
that will be possible to create in this cabinet.
7. Under Mounting, type NIL.
8. Under Backplane, type a NIL .
9. Select the Set as intrinsically safe check box if this cabinet has intrinsic safety
certification.
10. Click the Associate Symbols tab to associate a symbol with the current cabinet. The
software will use this symbol when generating a report in the Enhanced Report Utility.
11. Click Revisions to manage the revisions of the new cabinet if needed.
12. Click OK to accept your definitions for the new cabinet and close this dialog box.

Create Hub Equipment

You can add hub equipment to a hub cabinet. Hub equipment is a type of wiring equipment.
After creating hub equipment, you can add a port and a hub connector.
1. In the Reference Explorer or Domain Explorer, expand the Telecom Panels folder.
2. Expand the Equipment Cabinets folder to display the existing hub cabinets.
3. Right-click a hub cabinet and then on the shortcut menu, click New > Hub Equipment.
4. On the New Wiring Equipment dialog box, type a name for the new hub equipment and
then click OK.
5. On the General tab of the Wiring Equipment Properties Hub dialog box, type the
name of the new hub.
6. Select the Double width check box if the hub occupies a double width slot or position.
7. In the Details group box do the following as you require:
a.Type a description.
b.Select a hub type, model, and manufacturer. If the required value is not available on
the list, click to define a new one.
c.Enter a sequence if you need to define the hub sequence.

8. Click the Category Properties tab.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 41 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

9. Revise and modify category property values as you require. Click the value for each
property and modify it as needed.
10. Click OK to accept your settings and close the dialog box.

Create a Hub Connector

This procedure explains how to add a hub connector to a hub.

1. In the Domain Explorer or Reference Explorer, expand a hub cabinet hierarchy to display
the existing hub equipment and hub ports.
2. Do one of the following: Right-click a port to which you want to add a hub connector. Right-
click the Hub Connectors folder.
3. On the shortcut menu, click New > Hub Connector.
4. On the Connector Properties dialog box, type a connector name.
5. Select a connector type. Click to add new connector types to this list.
6. Set whether the connector is male or female.
7. Select a panel side for the connector.
8. Click OK.

Add a Port to a Hub

This procedure explains how to add a port to a hub.

1. In the Domain Explorer or Reference Explorer, navigate to a hub cabinet.
2. Double-click a hub cabinet to display the existing hub equipment.
3. Right-click a hub equipment item and then on the shortcut menu, click New > Port.
4. On the General tab of the Port Properties dialog box, type a name for the new port.
5. Type a brief description if necessary.
6. Enter the port sequence in the hub if needed.
7. Click the Associate Symbols tab to associate a symbol with the current port. The software
will use this symbol when generating a report in the Enhanced Report Utility.
8. Click OK.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 42 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

7.5 Create a Telecom Junction Box

This procedure explains how to create a telecom junction box.

1. In the Domain Explorer, double-click the Panels by Category folder and expand the
Telecom Panelsfolder.
2. Right-click the Junction Boxes folder and then on the shortcut menu click New >
Telecom Junction Box.
3. On the Telecom Junction Box Properties dialog box, on the General tab, under Panel,
type the name of the new junction box.
4. Select the required values from the Type, Manufacturer, Model, Area classification, and
Locationlists. If the required value is not available, click next to the relevant list arrow to open
the appropriate supporting table.
5. Under Dimensions, type a value for the junction box dimensions if needed.
6. Under Mounting, type NIL.
7. Under Backplane, type NIL.
8. Select the Set as intrinsically safe check box if this junction box has intrinsic safety
certification.
9. Click the Associate Symbols tab to associate a symbol with the current junction box. The
software will use this symbol when generating a report in the Enhanced Report Utility.
10. Click Revisions to manage the revisions of the new panel if needed.
11. Click OK to accept your definitions for the new panel and close this dialog box.

7.6 Create a Splice Panel

This procedure explains how to create a splice panel.

1. In the Domain Explorer, double- click the Panels by Category folder and expand the
Telecom Panelsfolder.
2. Right-click the Splice Panels folder and then on the shortcut menu click New > Splice.
3. On the Splice Panel Properties dialog box, on the General tab, under Panel, type the
name of the new panel.
4. Select the required values from the Type, Manufacturer, Model, Area classification, and
Locationlists. If the required value is not available, click next to the relevant list arrow to
open the appropriate supporting table.
5. Under Dimensions, type a value for the splice panel dimensions if needed.
6. Under Mounting, type NIL.
7. Under Backplane, type NIL.
8. Select the Set as intrinsically safe check box if this splice panel has intrinsic safety
certification.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 43 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

9. Click the Associate Symbols tab to associate a symbol with the current splice. The
software will use this symbol when generating a report in the Enhanced Report Utility.
10. Click Revisions to manage the revisions of the new splice panel if needed.
11. Click OK to accept your definitions for the new splice panel and close this dialog box.

7.7 Create a Patch Panel

This procedure explains how to create a Patch panel.

1. In the Domain Explorer, double- click the Panels by Category folder and expand the
Telecom Panelsfolder.
2. Right-click the Patch Panels folder and then on the shortcut menu click New >Patch Panel.
3. On the Patch Panel Properties dialog box, on the General tab, under Panel, type the name
of the new panel.
4. Select the required values from the Type, Manufacturer, Model, Area classification, and
Locationlists. If the required value is not available, click next to the relevant list arrow to
open the appropriate supporting table.
5. Under Dimensions, type a value for the splice panel dimensions if needed.
6. Under Mounting, type NIL.
7. Under Backplane, type NIL.
8. Select the Set as intrinsically safe check box if this splice panel has intrinsic safety
certification.
9. Click the Associate Symbols tab to associate a symbol with the current splice. The
software will use this symbol when generating a report in the Enhanced Report Utility.
10. Click Revisions to manage the revisions of the new splice panel if needed.
11. Click OK to accept your definitions for the new splice panel and close this dialog box.

7.8 Create a Distribution Frame

This procedure explains how to create a Distribution Frame.

1. In the Domain Explorer, double- click the Panels by Category folder and expand the
Telecom Panelsfolder.
2. Right-click the Patch Panels folder and then on the shortcut menu click New >Distribution
Frame.
3. On the Distribution Frame Properties dialog box, on the General tab, under Panel, type
the name of the new panel.
4. Select the required values from the Type, Manufacturer, Model, Area classification, and
Locationlists. If the required value is not available, click next to the relevant list arrow to
open the appropriate supporting table.
5. Under Dimensions, type a value for the splice panel dimensions if needed.
6. Under Mounting, type NIL.
7. Under Backplane, type NIL.
8. Select the Set as intrinsically safe check box if this splice panel has intrinsic safety
certification.
9. Click the Associate Symbols tab to associate a symbol with the current splice. The
software will use this symbol when generating a report in the Enhanced Report Utility.
10. Click Revisions to manage the revisions of the new splice panel if needed.
11. Click OK to accept your definitions for the new splice panel and close this dialog box.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 44 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

7.9 Create a Telecom Cable

You can create new cables either in the Domain Explorer or the Reference Explorer. If you
are creating a cable that is going to have a frequently used configuration, we recommend that
you create it in the Reference Explorer. Reference cables( created by COP) that are already in
the seed database facilitate fast creation of plant cables by copying an existing cable
configuration from the Reference Explorer to the Domain Explorer.
However for the creation of NEW cables, do the followings:

1. In the Domain Explorer or Reference Explorer, right-click the Cables folder and then click
New > Cable.
2. In the Cable Configuration dialog box, select a cable configuration from the Cable
configuration list.
3. Click Create.
4. In the Cable Properties dialog box, under Cable, type the cable name.
5. Under Description, type the new cable description as needed.
6. Select one of the following under Cable class:Telecom
7. Under Type, select the required cable type if needed. If the required type is not available,
click next to the list arrow to add the required item to the list.
8. Select the cable manufacturer, model, color as appropriate. If the item that you need is not
on the list, click .
9. Type the end one, and end two locations of the cable.
10. Type the cable length and select the unit of measure.
11. To assign this cable to a cable drum, select values from the Pulling area list and from the
Cable drumlist.
12. To define a cable harness, select the cable harness from the list.
13. To define the cable as intrinsically safe, select Set as intrinsically safe.
14. To define glands for the cable, from the Glands group box, select the End 1, End 2 or both
cable glands.
***Note the graphic representation of cable glands in the software:

A cable with no glands

A cable with a gland on one of its sides

A cable with a gland on both sides

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 45 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 46 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Cable
Cable: To be filled in
Description
Description:To be filled in
Type :Drop down lists of cables
to be created
Manufacturer
Manufacturer:To be filled in
Model
Model:To be filled in
Color
Color: Not used by Telecom
Length
gth: To be filled in
Unit of measure
measure:To be filled in (meter)
Cable harness
harness: Type NA
Set as intrinsically safe
(checkbox):
(checkbox):NA

Cable class
class: Drop-down selection,
Telecom.

End 1 location
location: Type NA

End 2 location
location: Type NA

Pulling Area
Area: To be decided by SMOE

Drum
Drum: To be decided by SMOE

Wire end naming convention

convention: Not in
use.

Glands, End 1 and End 2

2: To be filled

Revisions (button):
(button):NA

Connectors (button):
Note*** The reference cables
created by COP seed database have
filled in color information
information.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 47 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

8. INSTRUMENT INDEX MODULE

MOD

8.1. Supporting Tables for Telecom

The following table lists all the available Telecom

Telecom supporting tables and the description
of their functions. You can access these supporting tables by clicking next to a list arrow
or by clicking Tables > Telecomand then an appropriate
appropriate command in the Instrument
Index modules.

Tables in Instrument
Index Module

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 48 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Supporting Table Description

Telecom Device Allows you to create and manage telecom device types. You
Types define the required telecom device type profile for your telecom
tag numbers so that new tags that you create can acquire the
necessary properties. SmartPlant Instrumentation provides a
number of predefined telecom device types, such as AL
(alarm), CAM (camera), and so forth. You can add new
telecom device types and modify the shipped ones as desired.
You can also delete a telecom device type that is not in use, but
the software does not let you delete a telecom device type that
you already used to create a tag number.

Telecom Line Allows you to maintain the contents of the Telecom line list
Numbers when creating a telecom field device in the Plug-and-Socket
Box wizard and the Line number list on the Tag Number
Properties dialog box.

Telecom Field Allows you to maintain the contents of the Field equipment
Equipment select list on the Tag Number Properties dialog box.

Telecom Signal Levels Allows you to maintain the contents of the Signal level select list
on the Tag Number Properties dialog box.

8.2. Working with Old Equipment

SmartPlant Instrumentation partially supports telecom panels created prior to Version 7. These
panels and their child items are organized in the Old Equipment folder.Note that you cannot
create additional panels in this folder, but you can add new child items, modify the properties of
the existing items, and delete the old equipment items, as you require.

8.3. Set Telecom Device Type Profile Default

You define a telecom device type profile for your telecom devices so that new telecom tag
numbers that you create acquire the necessary properties.You can add new telecom device
types and modify the shipped ones as required. SmartPlant Instrumentation uses standard
function identifier acronyms to identify telecom device types. If some acronyms are not unique
and are used for more than one device type, the Select Telecom Typedialog box opens where
you select the appropriate device type.
After defining a device type, you set device type profile defaults for new telecom tag numbers.
As result,SmartPlant Instrumentation will create your new tag numbers with certain predefined
properties based on thetelecom device type you select for the new tag number. You set profiles
for every telecom device type thatyou use.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 49 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

1. On the Instrument Index Module window menu bar, click Tables>

> Telecom > Telecom
Device Types.

2. On the Telecom Device Types dialog box, do one of the following:

Select an existing device type and click Profile.
Click New and define a device type that you need and then click Profile.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 50 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

1. For the Existing device

type; choose from the
drop down list, select
device type and click
profile.
2. For new device type,
please click on NEW.

NOTE: You can create different

types of speakers for example
15 W
W, 10W, 6 W with respect to
tapping assignment
individually
individually.

3. On the Telecom Device Type Profile dialog box, define the general default settings for new
telecom devices.

Please
Browse
Symbol File
name &
patch.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 51 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

4. Click the Wiring tab if you need to define wiring default settings.

1. Please check
include wiring.

2. Choose from drop

down reference panel
lists that you created
in the reference
explorer before.

NOTE: If you want to

create specific tapping
termination, you
should create device
panel with terminal
strip in the reference
explorer before to
apply default cable
termination.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 52 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

5. On the Wiring and Control System tab, select the Include wiring check box.

1. Choose Plant name

as EKOL..

2. Check in Include
custom table..

Choose from Drop

down list for Superior
Functional Location.

6. To define new device tags as control-system-enabled,

control select the Control system check box.
This enables the corresponding tag numbers
nu for tag assignment.
7. To enable automated creation of coupled control system tags, select Automatic CS tags.
8. From the Reference device panel list, select an appropriate reference panel for this
instrument type. These are device panels that were created
creat in Reference Explorer
Explorer.
9. If your reference device panel settings enable the Conventional connections group box, do
one of the following for each connection that you need for the current instrument type:
Click New,, to add a connection.
Click Properties,
Properties to o edit the properties of an existing convention, and on the
Conventional Connection Properties dialog box, define the settings that you
require, and click OK.

10. If your reference device panel settings enable the Plug-and-socket

socket connections group
box,do one of the following for each connection that you need for
for the current instrument
type:

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 53 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Click New, to add a connection.

Click Properties, to edit the properties of an existing convention, and on the Plug-
and-Socket ConnectionProperties dialog box, define the settings that you require,
and click OK.

8.4. Create a Telecom Field Tag

This procedure explains how to create new telecom tag numbers. Note that the new tag
numbers will be based on the telecom profile default that you defined.

1. Do one of the following:

In the Domain Explorer, right-click the Instruments folder and then click New.
On the Instrument Index Module window menu bar, click Edit > Tag Number >
New Tag Number.
Click on the module toolbar.

2. On the New Tag Number dialog box, from the Tag class list, select Telecom.
3. Under Tag number, type the name of the new tag number. For details on how to name new
tag numbers, see Instrument Tag Naming Convention. If more than one function identifier
exists for the current telecom type acronym, select an appropriate telecom device type on
the Select Telecom Type dialog box and then click OK.
4. On the New Tag Number dialog box, click OK.
5. On the Select Instrument Type dialog box, select the instrument type you want to associate
with the current telecom instrument, and then, click OK.
6. On the Tag Number Properties dialog box, enter appropriate values on the Generaltab.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 54 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

1. Service :Shall be used for

tag description (Tag
description field in SAP)
2. Status:Should be a drop-
down list comprising
CRTE (created) and
INAC(Inactive)
3. Location:Drop-down list
for all area codes
4. Require power supply:
To be check in
5. Old Tag Number: Shall
be used when changing
tag. No. for a device.
6. Manufacturer: To be
filled in
7. Model: To be filled in
8. Intrinsically safe
circuit type: To be filled
in when relevant
9. Loop No.: Please fill
loop number

Note: I/O type, signal

type ,Linear type, internal
loop order, on /off signal
state desc :NA

7. In the Loop Name dialog box, do one of the following:

Type the loop number name that the new instrument will be associated with.
Accept the displayed value to create a new loop with this name.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 55 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

8. Click the Telecom tab and enter your values as needed.

1. Field Equipment: To be
filled in
2. Location Layout: To be
filled in
3. Fire Area: TBA
4. Load(Watt): To be filled
in
5. Terminal
Identification: TBA

9. If the current field tag requires power supply definitions, click the Power Supply tab and
enter your values as needed. Make sure that you have selected the Requires power
supply check box on the General tab.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 56 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

10. Click OK to accept all the values that you have entered and to create the field tag.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 57 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

8.5. Duplicate a Telecom Field Tag

This procedure explains how to create a telecom field tag by duplicating the properties of an
existing one. You can then edit the new telecom field tag properties as required. You can
create the new duplicated telecom field tag in any <unit> of the current domain.
1. In the Domain Explorer, double-click the Instruments folder to display the existing
instruments.
2. Right-click a telecom field tag and then click Duplicate.
3. On the Duplicated Tag Number dialog box, under Tag number, type the name of the new
tag number. For details on how to name new tag numbers, see Instrument Tag Naming
Convention.
4. To create the new field tag in the another <unit> of the current domain, select the Create in
another unit check box and do the following:
On the Open dialog box, select the target <unit> for the new field tag.
Click OK.
5. Click OK to duplicate the field tag and close the Duplicated Tag Number dialog box.
6. On the Tag Number Properties dialog box, modify the values as you require and click OK.

8.6. Procedure for deleting Tag

This option enables you to to delete one or more instrument tags that are no longer in use.
However, for the purpose of deleting a tag, only SMOE SPI telecom coordinator and SEMCO
coordinators are allowed access. If you make a mistake in making a tag, you can simple change
the status and request SMOE/ SEMCO Coordinator to delete it on a later time.
The procedure for deleting tag is as follows:

From the drop down lists,

choose Deleted/ Voided Tags

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 58 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

1. Open the Tag Number Properties Form of the Instrument.

2. Change the Status to Deleted / Voided Tag No
3. Report the Tag to be deleted to Htoo/ SEMCO Coordinator with snap shot through Email.

SMOE/ SEMCO coordinator shall use the following procedure:

1. In the Domain Explorer, click the Instruments folder of the EKOL.
2. On the items pane, select the items you want to delete.
3. Right click thhe selected items , and click Delete.
4. When prompted, click Yes to confirm deletion.

8.7. Creating Loop

This procedure shows you how to create a new typical loop and the associated tag. Typical loops
withassociated typical tags can be very useful when you need to create numerous loops based on
the same looptemplate.
Creating a new typical loop is the first stage in batch loop creation procedure. This is when you
make all therequired typical loop definitions including the typical loop name, measured variable, and
so forth. At thisstage, you also select the appropriate instrument types for the typical tags you
associate with this typicalloop.

Create a New Individual Loop Number

This option shows you how to create a new single loop number, in the Domain Explorer or in the
InstrumentIndex module, and add it to your database.

1. On the Domain Explorer, expand your current <plant> hierarchy to display the Loops folder.
2. Right-click the Loops folder and on the shortcut menu, click New >Loop or click

3. On the New Loop Number dialog box, type the name of the new loop number.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 59 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

4. Click OK and, when prompted to create a new tag number, and associate it with the current loop,
clickYes.
Click No if you only want to create a loop number. Then, following the current procedure
from Step 7.
Click Yesif you want to create a tag number at this stage and associate it with the new loop.

5. If you clicked Yes, do the following:

a. The New Tag Number dialog box opens.
b. Type the tag number and click OK.

6. On the Select Instrument Type dialog box, select your instrument type and click OK.
7. The Tag Number Properties dialog box opens where you can define the general properties for
your tagnumber.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 60 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

8. When you have finished click OK to open the Loop Number Properties dialog box.
9. On the Loop Number Properties dialog box, define the properties you want to associate with the
Loopnumber.
10. Click OK to close the Loop Number Properties dialog box.

8.8. Duplicate a Loop Number

This option shows you how to create a new loop number by duplicating an existing one. SmartPlant
Instrumentation creates a new loop number based on the properties of a source loop that you select.
Thisfeature is useful when you want to create a loop number similar to an existing one. You
duplicate a loopnumber and then edit its properties as needed. Note that you can duplicate a loop
number in the same<unit> as the source loop number or in any other <unit> of the current domain.

1. In the Domain Explorer, expand your current <plant> hierarchy to display the Loops folder.
2. Double-click the Loops folder to display the existing loops.
3. Right-click the loop you want to duplicate, and on the shortcut menu, click Duplicate.
4. On the Duplicate Loop Number dialog box, type the new loop number.
5. If required, do the following to create the duplicated loop number in a different <unit> in the
currentdomain:
a. On the Duplicated Loop Number dialog box, check the Create in another unit check box.
b. On the Select Target Unit dialog box, select the target unit.
c. Click OK to return to the Duplicated Loop Number dialog box.
d. Click OK in the Duplicated Loop Number dialog box.

6. Do the following to create new tag numbers that will be associated with the new loop number:

a. On the Create Loop Tags dialog box, select the appropriate check boxes beside the tag
numbersthat you want to create. The software duplicates the tags associated with the source loop
andassociates the new tags with the new loop number. Note if you have more than one type of tag
associated with the loop, for example; Conventional tags and Functional requirement tags, then a
Create Loop Tags dialog box will open for each tag type, one after the other.

b. Modify the names of the new tag numbers as needed. Note that you cannot change the separator.
c. Select Copy the instrument type from the source tag numbers to keep the instrument type of
the source tags.
d. Click Next, to move to the next tag type Create Loop Tags dialog box. Note if you click Next
afterediting all the loop tag types a prompt will appear, click Yes to return to the first Create

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 61 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Loop Tagsdialog box, or No to close the prompt.

e. Click OK.
f. When prompted, click Yesto edit the tag properties you have duplicated, or No to duplicate the
tagnumbers with their existing parameter values.
g. On the Loop Number Properties dialog box, define the properties you want to associate with the
loop number.
h. Define a functional requirement if required.
i. Click OK .

NOTE:
You can change the measured variable of the new loop number or keep it the same as the source one.
New tag numbers associated with the new loop number will be affected accordingly, that is, the
measured variable of the new tag numbers will change if the measured variable of the new duplicated
loop is changed. For example, if you are duplicating Loop 101-F-102 and you change the measured
variable of the new loop to T, the new tag numbers associated with the new loop number will change
their instrument type in accordance with the new measured variable: source Tag Number 101-FE-102
will change to 101-TE- 102.
You can also duplicate a loop number from the Instrument Index module. In the Instrument Index
Module window, click on the toolbar or on the menu bar, click Edit >Loop Numbers
>DuplicateLoop Number.

8.9. Associating Instrument Tags with Loop Numbers

This section shows you how to associate instrument tags with loops. There are several different
ways thatyou can associate an instrument tag with a loop. You can select a particular loop number
and make a batchinstrument tag association or dissociate any tags from the selected loop as
needed. Another way is to selectan instrument tag and change its loop association if it exists. You
can also create a new loop with which youwant to associate a selected instrument tag and
associate it with this loop on the fly.

Associate Multiple Tag Numbers with a Loop

1. Start the Instrument Index module.

2. Do one of the following:
Click Actions >Associate.
Click .
3. On the Enter Loop Number dialog box, do one of the following:
Type the name of the required loop number on the Enter Loop Number data field, and click
OK.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 62 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Click Find, to open the Find Loop dialog box. Search for a desired loop, select it, and then
clickOK.
4. On the Associate Tag Number dialog box, click Find to open the Find Tag dialog box.
5. On the Find Tag dialog box, click Find and select the tag numbers that you want to associate
with thecurrent loop.
6. Click OK.
7. On the Associate Tag Number dialog box, under Available tag numbers select a tag number
andclick Associate. Repeat this step for every tag number that you want to associate with the
current loop.
8. Click OK, to make the association.

Change an Instrument Tag Loop Association in the Domain Explorer

This option shows you how to move a selected instrument tag that is associated with a specific loop
numberto another existing loop number. You change this association when editing an instrument
tag.

1. In the Domain Explorer, expand your current <plant> hierarchy to display the Instruments folder.
2. Double-click the Instruments folder to display the existing tag numbers.
3. Right-click the required tag, and from the shortcut menu select Properties.
4. On the Tag Number Properties dialog box, click Associate.
5. On the Find Loop dialog box, type the required search parameters as needed and click Find.
6. Select the loop you require in the Search results data window and click OK.
7. On the Tag Number Properties dialog box, click OK.

Change Instrument Tag Loop Associations in the Instrument Index Standard Browser View

This option shows you how to move multiple instrument tags that are associated with a specific loop
number
to another existing loop number. You change this association when editing an instrument tag.

1. To start the Instrument Index module do one of the following:

Click
Click Modules >Instrument Index.
2. Do one of the following:

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 63 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Click
Click Edit >Tag Numbers >Tag Number Properties.
3. On the Enter Tag Number dialog box, do one of the following:
To choose a single tag, type the tag number in the box.
To choose multiple tags, click Find to open the Find Tag dialog box, and then click and
select thedesired tags.
4. Click OK, to open the Tag Number Properties box.
5. Click Associate.
6. On the Find Loop dialog box, type the desired search parameters as needed and click Find.
7. Select the loop you require in the Search results data window and click OK.
8. If you chose one instrument tag, on the Tag Number Properties dialog box, click OK.
9. If you chose more than one instrument tag, on the Tag Number Properties dialog box:
a. Click Apply to save the changes.
b.ClickNext to find the next tag.
c. Click Associate to associate a tag with a loop.
d. Click OK to finish.

Associate an Instrument Tag with a New Loop

This option shows you how to create a new loop number on the fly while editing an instrument tag.
You canthen move the current instrument tag and associate it with the new loop you created.
1. On the Domain Explorer, expand your current <plant> hierarchy to display the Instruments
folder.
2. Double-click the Instruments folder to display the existing tag numbers.
3. Right-click the required tag, and from the shortcut menu select Properties.
4. On the Tag Number Properties dialog box, click New Loop.
5. On the New Loop Number dialog box, type the new loop number and click OK.
6. Edit the properties of the new loop number on the New Loop Number dialog box and click OK.
7. On the Tag Number Properties dialog box, click Associate.
8. On the Find Loop dialog box, type the required search parameters as needed and click Find.
9. Select the loop you have just created in the Search results data window and click OK.
10. On the Tag Number Properties dialog box, click OK.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 64 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

When associate the new field

device with the existing loop
number, loop number
appears there.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 65 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Dissociate an Instrument Tag from Loops

This option shows you how to dissociate instrument tags from a selected loop.

1. Start the Instrument Index module.

2. Do one of the following:
Click Actions >Associate.
Click .
3. On the Enter Loop Number dialog box, do one of the following:
Type the name of the required loop number on the Enter Loop Number data field, and click
OK.
Click Find to open the Find Loop dialog box. Search for a desired loop, select it, and then
clickOK.
4. On the Associate Tag Number dialog box, under Associated Tags select the tag number you
want todissociate from the current loop.
5. Click Dissociate. Repeat steps four and five for every tag number that you want to associate with
thecurrent loop.
6. When you have finished, Click OK.

8.10. Edit a Typical Loop

This option enables you to edit the properties of an existing typical loop. You can modify the existing
typicalloop properties and associate new typical tags with the current loop.

1. On the Instrument Index menu bar, click Edit >Typical Loop Management.
2. On the Typical Loop Management dialog box, select the required typical loop and click
Properties.
3. On the Typical Loop Properties dialog box, edit the fields as needed.
NOTE:
The Loop name and the Measured variable fields are required fields.

4. On the Associated typical tags data window, select an existing typical tag that has been already
associated with the current loop and do one of the following:
Click Properties to open the Typical Tag Number Properties dialog box to edit the typical
tagproperties.
Click Delete to delete the selected tag.

5. Click Add to append a typical tag row in the Associated typical tags data window.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 66 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

6. On the data window, do the following:

a. In the Instrument Type column, select the required instrument type from the list. The selected
instrument type serves as a typical tag associated with the current typical loop.
b. In the Number field, type the required typical tag number.
c. In the Suffix field, type the required typical tag suffix to ensure tag name uniqueness.
d. Add as many typical tags as required and click OK to associate the newly added typical tags
withthe current loop.

NOTE

Ensure that the typical tag naming conventions comply with the required naming convention rules.
The New Tag Name field automatically displays the name of the new typical tag after defining the
typicaltag instrument type, number, and suffix.

8.11. Delete a Typical Loop

This option shows you how to delete the required typical loop with or without the associated typical
tags.
1. On the Instrument Index menu bar, click Edit >Typical Loop Management.
2. On the Typical Loop Management dialog box, select the required typical loop and click Delete.
3. On the Delete Typical Loop dialog box, review the typical loop properties and click Delete.
4. If prompted, click Yesto delete the typical loop and associated tags. Click No to delete the typical
looponly.
5. On the Typical Loop Management dialog box, click Close.

NOTE: BE Careful whenever delete the loop as all of its associated instruments shall be deleted

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 67 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

8.12. Example of Creating a Telecom Conventional

ntional Field Device

From the Instrument Index module, choose Tables andclick on Telecom

Telecom-Telecom Device
Types.

1. From the Telecom Devices Types Lists, choose Device Type .If the device type is already
in the drop down list, just need to click on Profile. If not, click New to create New
Telecom Device Type.
Type

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 68 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

2. If you have created symbols already, Please browse the name and path.

3. Click on Wiring and Control System. Check in Include Wiring. Fill in Reference Device
Panel; choose from drop down lists that you create Telecom Device Types in the
Reference Explorer.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 69 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Please take note to create TS along with device panel in order to connect cable. For example; if
you want to create Loudspeaker for specific Watt, you will need to create as follows;

Sr.No Loudspeaker W Tapping

1 LS 6.0 W 1:2
2 LS 3.0 W 1:3
3 LS 1.5 W 1:4
You can create default Telecom device (same loudspeaker) but different Watt and usage.

4. Create Reference Cable by clicking New. For modifying click properties.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 70 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

For creating New Reference Cable.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 71 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

For modifying Reference Cable.

5. Please fill in Plant Name and Superior Functional Location.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 72 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

6. Create a Tag no.

Please fill the Tag no. as BD/ EKOL/80 LS-12345according

LS according to Naming Convention.

7. Please fill in Tag.no Properties.

Properties

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 73 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

9. WIRING MODULE

Understand Concepts and Presentation of Panel and Cable Wiring

Panels and their sub-entities

entities are arranged in the tree view of the Domain Explorer
Explorer/ Telecom
Explorer according to panel location and panel
panel category. Therefore, you can find the same panel
and its sub-entities
entities in both the Panel by Location and Panel by Category folders of the Domain
Explorer.
Panels are classified according to their category. Click the Panel by Category folder to display tthe
various panel category folders. These folders will hold all your panels and their categories. You
cannot delete these folders, nor can you create new ones.

Supporting Tables for Wiring Module in Telecom

The following table lists all the available

available Telecom supporting tables and the description of their
functions. You can access these supporting tables by clicking next to a list arrow or by clicking
Tables > Telecomand then an appropriate
appropri command in the Wiring modules

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 74 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Panel Sub-Systems Allows you to maintain the contents of the Sub-system select
list on the Equipment Panel Properties dialog box.

Telephone Numbers Allows you to define new telephone numbers that you can
associate with existing switch channels in PABX cabinets.

Telephone Number Statuses Allows you to manage the contents of the Telephone number
statusselect list on the Telephone Number Properties dialog
box.

Telephone Number Usages Allows you to manage the contents of the Telephone number
usages select list on the Telephone Number Properties dialog
box.

Intercom Numbers Allows you to define new intercom numbers that you can later
associate with amplifiers.

PA Zones Allows you to manage the PA zone definitions which are

available for selection on the Category Properties tab of the
Wiring Equipment Properties (Amplifier) dialog box.

Alarm Zones Allows you to manage the alarm zone definitions which are
available for selection on the Category Properties tab of the
Wiring Equipment Properties (Amplifier) dialog box.

PABX Categories Allows you to manage the contents of the PABX categories
select list on the PABX Cabinet Properties dialog box.

*****
Note: We will not use Intercom in smart plant Instrumentation.

9.1. Creating Wiring Scheme

After the System Administrator initializes and creates a domain, Smart Plant Instrumentation
creates the following items:
Reference cables
Reference device panels with terminal strips
Connection types
These reference items suffice for the most common connections to device panels. For more
sophisticated combinations, you should create your own reference items.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 75 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

For example, for a 2-wire

wire device you need to create in the Reference Explorer
Explorer:

A Field Device with a two-

two terminal strip named DEFAULT 2W DEVICE PANEL
A cable with a shielded twisted pair
pair (cable + one shielded pair), named DEFAULT 2W
CABLE
A connection device that connects two wires from a pair one after the other named 2 IN A
ROW
You can then select the above items the wiring profile to define the reference wiring properties for a
given instrument type.
When you start a new wiring scheme, the folders in the Domain Explorer are empty. You can
right-click
click one of the panel folders in the Domain Explorer and on the shortcut menu, click New and
then click the required option. The Reference Explorer contains several reference panels and
cables that are provided as shipped data that you can copy to the Domain Explorer
Explorer.

9.2. Associate a Symbol with an Item

Make sure that you have defined a custom symbol folder in the SmartPlant Instrumentat
Instrumentation
Preferences dialog box for the appropriate enhanced report type before you associate a symbol with
an item.

When you associate a symbol with an item that can have more than one possible relation to other
items for which you want to
o display data, make sure that the symbol you select uses macros with

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 76 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

the appropriate relations. If a macro has an incorrect relation, the software cannot display the data.

1. In the Domain Explorer, select the desired item, for example, a particular pane
panel.

2. Right-click
click the item and click Properties.
3. Click the Associate Symbols tab.
4. Click New.
5. In the Name column, select the desired report type.
6. Beside the Symbol File column, click Browse.
7. Navigate to the desired .sym file.
8. If you require, repeat steps 4 -7 to associate symbols with the item for other report types.

NOTES:

For an instrument, when you associate a symbol for Enhanced Report Utility reports, the
symbol will also be displayed in other wiring reports.
You can associate each item with one symbol only per available report type.
You can associate the same symbol with more than one item if you desire.
When using custom terminal symbols in enhanced reports, there are two ways of
displaying the terminals on the drawing sheet:
Associating a symbol with a panel, where the symbol exactly represents the panel
panel-strip-
terminal configuration, and dragging the panel onto the drawing sheet. With this method,
the software displays the entire panel.
Associating a symbol with each individual terminal and dragging the desired terminals onto
the drawing sheet. With this method, the software displays the selected terminals with
their associated strips and panels, together with the appropriate macros.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 77 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

9.3. Terminal Strips

When creating a terminal strip, you are required to use a basic repeating numbering pattern
(configuration) to enable logical numbering of terminals. A numbering pattern identifies the basic
numbering system, or stepping method used for terminals in a terminal strip. Set +1,-1,+2,-2, for
example, has a pattern of two, while the Set 1,2,3SH,4,5,6SH has a pattern of three.
You can label the terminals on a terminal strip according to any numbering system that you require
(up to ten characters in length). To facilitate logical terminal numbering, SmartPlant
Instrumentation requires you to configure the basic repeating numbering pattern (configuration) for
the terminals in the new terminal strip before defining that terminal strip.
When creating a strip in an I/O card or I/O termination, you use configurations that include
channels. If you want to create a terminal strip without channels in one of these panels, set the
number of terminals per channel to zero.

1. In the Domain Explorer or Reference Explorer, right-click a panel.

2. On the short-cut menu, click New >Terminal Strip.

3. On the Terminal Strip Configuration dialog box, click New.

4. On the Number of Terminals in Pattern dialog box, type or select a number to define the
number of terminals to be repeated in the pattern and click OK.

5. Under Configuration name, type the name of the new configuration.

6. Under Configuration description, type an optional description of the new configuration.

7. Type or select the total number of terminals required in the terminal strip.

8. Select the starting number for the first terminal in the terminal strip.

9. Select the required number of terminals per channel or segment.

10. Select the first channel.

11. In the Terminal Numbering Pattern data grid, click and type in the Prefix field, click and
type a value if you want to prefix the names of the terminals.

12. Select the Incremented check box if you want the terminal number to be incremented within
the pattern.

13. Select the Numbered check box if you want the number of the terminal to appear between
the prefix and the suffix.

14. In the Suffix field, click and type a value if you want a suffix for the names of the terminals.

15. From the Orientation list, select the connection orientation to the terminal:

Regular a conventional terminal that functions as a single unit.

Left a terminal that has wires on the left side only.
Right a terminal that has wires on the right side only.
Left / Right a terminal that has wires on the left side only.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 78 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Modify Terminal Strip Configuration

The following procedure explains how to modify an existing configuration of terminals. Modifying a
terminal configuration does not affect the existing terminal strips. They retain their previous terminal
configuration.

1. In the Domain Exploreror Reference Explorer, right-click a panel.

2. On the short-cut menu, click New >Terminal Strip.

3. On the Terminal Strip Configurationdialog box, select a configuration from the Configuration
name list.

4. Click Edit.

NOTE: The software does not allow you to change the terminal numbering pattern of an existing
configuration. Therefore, you have to define a new configuration if you need to make such a change.

5. Under Configuration name, type the name of the new configuration.

6. Under Configuration description, type an optional description of the new configuration.

7. Repeat Step No. 7 to Step No.15.

Example of Terminal Strip Configuration

Each of the following examples demonstrates how various features of the strip
configuration operate. In each case, the terminal strip has a repeating sequence of three
terminals, and a total of 8 terminals (the last 2 terminals are designated SPARE, and are
not shown)

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 79 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 80 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Create A Terminal Strip

This procedure explains how to create a terminal strip. You can add a terminal strip to a panel, rack,
slot, ora wiring equipment item.

1. In the Domain Explorer or Reference Explorer, right-click one of the following items:
Panel
Rack
Slot
Wiring equipment item, for example an I/O card

2. On the short-cut menu, click New >Terminal Strip.

On the Terminal Strip Configuration dialog box, select a configuration from the Configuration
namelist.

NOTE: If you do not have an appropriate terminal configuration, click New.

Click Create.

3. On the Terminal Strip Properties dialog box, on the General tab, under Terminal strip type the
nameof the new terminal strip.

4. From the Type, Model, and Manufacturer lists, select appropriate values to define the new
terminalstrip as you require. If any of the lists do not contain the value that you need, click to open
therelevant supporting table where you can manage the contents of the select lists.

5. Type a value for mounting, dimensions, and rail if needed.

6. Under Sequence, enter a number to define the sequence of the current terminal strip in its parent
item(a panel, rack, slot, or wiring equipment).

7. To manage the revisions of the terminal strip, click Revisions.

8. Click the Associate Symbols tab to associate a symbol with the current terminal strip. The
softwarewill use this symbol when generating a report in the Enhanced Report Utility.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 81 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

9. ClickOK to create the new terminal strip.

Move a Terminal Strip to another Parent Item

This option enables you to move a terminal strip with connected cables to another parent item
(panel, rack,slot, or wiring equipment). The software retains all the connection definitions after
moving a terminal strip.

In the Domain Explorer or Reference Explorer, select a terminal strip that you want to move.

1. Expand the hierarchy of the target parent item.

NOTE. You can open another instance of the Domain Explorer or Reference Explorer and place it
beside the one that is already open to make the drag-and-drop operation easier.

2. Drag the selected terminal strip to the desired parent item.

The following restrictions apply when trying to move a terminal strip with connected cables:

The terminal strip is associated with an instrument type.

The terminal strip is used by an auto-wiring task.
The terminal strip has connected terminals or channels that are associated with control
system tags.
The terminal strip has not been claimed for a project.
The terminal strip is associated with a local or general signal.
The target parent item is a plug-and-socket box.

Add a Terminal to a Terminal Strip

This procedure explains how to add a single terminal to an existing terminal strip.

1. In the Domain Explorer or Reference Explorer, select a terminal strip to which you want to add
aterminal.

2. Right-click the selected terminal strip and then on the shortcut menu, click New >Terminal.

3. On the General tab of the Terminal Properties dialog box, accept or select the required terminal
orientation.

4. Enter the terminal number or numbers in the Left terminal or Right terminal fields.

NOTE: Your selection of the terminal orientation determines whether the Left terminal or Right
terminalfields are available. If you select Left and right-oriented, the software lets you enter a value for
bothleft and right terminals. If you select Regular, the software lets enter the terminal number under Terminal.

5. UnderSequence, type a unique terminal sequence number.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 82 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

NOTE:

The sequence number designates the physical position of the terminal on the terminal strip. The
software assigns a sequence number automatically when you add a new terminal to a terminal strip. Ifyou
change the sequence number of a terminal, be sure to change the sequence numbers of the otherterminals
on that terminal strip to avoid duplicate values, which may interfere with the terminationprocess.

6. Select a terminal color as needed.

7. In the Details group box, enter a channel number.

8. If the current terminal is in a channel which in turn is a wiring equipment sub-item, enter a
sequencenumber with in the current channel.

9. From the Type, Model, and Manufacturer lists, select appropriate values to define the new
terminal asyou require. If any of the lists do not contain the value that you need, click
to open the relevantsupporting table where you can manage the contents of the
select lists.
10. In the Note text box, type, if required, type a brief note or a remark about this terminal.

11. Click the Associate Symbols tab to associate a symbol with the current terminal. The
software will use this symbol when generating a report in the Enhanced Report Utility.
12. Click OK to create the new terminal.

Add a Group of Terminals to a Terminal Strip

This procedure explains how to add a new group of terminals to an existing terminal strip.

1. In the Domain Explorer or Reference Explorer, select a terminal strip to which you want to
add a group of terminals.

2. Right-click the selected terminal strip and then on the shortcut menu, click Actions > Add
Terminal Group.

3.On the Add Terminals dialog box, select an appropriate terminal configuration from the
Configuration name list. The configuration you choose determines the labeling of the terminals you
are about to create.

4.Do one of the following:

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 83 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

If the selected configuration is suitable, click OK to add the terminals.

Change the configuration according to your requirements as specified in the steps below.

5.In the Total number of terminals spin box, enter the total number of new terminals required.

6.In the First terminal of added group spin box, enter the number of the next incremented terminal.

NOTE:
To continue the numbered sequence of the existing terminals, you should enter the next numericalvalue of
the terminal, and not the ordinal sequence. For example, if you already have 48 terminals arranged in
groups of three, where the last 3 terminal labels are +16, -16, and SH, the value in the First terminal of added
group spin box must be 17 and not 49

7.In the Terminal Numbering Pattern group box, do the following:

a. Type a prefix in the Prefix field if required.

b. Select the Incremented check box if you want the terminal number to be incremented
within the pattern.
c. Select the Numbered check box if you want the number of the terminal to appear
between the prefix and the suffix.
d. Type a suffix if required.

8. Click OK to create the new group of terminals on the terminal strip.

NOTE:

This dialog box does not allow you to save the changes you make to an existing terminal strip configuration.
The software applies the changes only to the group of terminals you are currently adding.

Edit the Properties of a Terminal

1. In the Domain Explorer or Reference Explorer, select a terminal that you want to edit.

2. Right-click the selected terminal and then on the shortcut menu, click Properties.

3. On the General tab of the Terminal Properties dialog box, accept or select the required terminal
orientation.
4. Enter the terminal number or numbers in the Left terminal or Right terminal fields.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 84 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

NOTE:
Your selection of the terminal orientation determines whether the Left terminal or Right terminalfields are
available. If you select Left and right-oriented, the software lets you enter a value for both left and right
terminals. If you select Regular, the software lets enter the terminal number under Terminal.

5.Under Sequence, type a unique terminal sequence number.

NOTE:
The sequence number designates the physical position of the terminal on the terminal strip. The software
assigns a sequence number automatically when you add a new terminal to a terminal strip. If you change
the sequence number of a terminal, be sure to change the sequence numbers of the other terminals on that
terminal strip to avoid duplicate values, which may interfere with the termination process.

6. Select a terminal color as needed.

7. In the Details group box, enter a channel number.

8. If the current terminal is in a channel which in turn is a wiring equipment sub-item, enter a
sequencenumber with in the current channel.

9.From the Type, Model, and Manufacturer lists, select appropriate values to define the new
terminal as you require. If any of the lists do not contain the value that you need, click to open
the relevant supporting table where you can manage the contents of the select lists.

10. In the Note text box, type, if required, type a brief note or a remark about this terminal.

11. Click the Associate Symbols tab to associate a symbol with the current terminal.
The software will use this symbol when generating a report in the Enhanced Report Utility.

12. Click OK to create the new terminal.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 85 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Move a Terminal

This option enables you to move a terminal from one position to another on a terminal
strip/channel, or from one terminal strip or channel to another terminal strip or channel. It is
possible to move a terminal only if the following is true:

The source terminal is not connected to any wiring.

When the terminal sequence is changed, even if the terminal is connected.
When the terminal is connected and has a signal, and the terminal is being moved to a
different terminalstrip provided the target terminal strip is under wiring equipment that is not
an I/O card or I/O termination.
When the terminal is connected but does not have a signal and is being moved from one
terminal strip toanother.

It is not possible to move a connected terminal that has a signal or if the target terminal strip is
under an I/O card or I/O termination.

1.In the Domain Explorer or Reference Explorer, select a terminal that you want to move.
2. Expand the hierarchy of the target terminal strip.

NOTE:

You can open another instance of the Domain Explorer or Reference Explorer and place it beside
the one that is already open to make the drag-and-drop operation easier.

3. Drag the selected terminal to the desired terminal strip.

Select a Graphic for a Terminal Connection

This procedure explains how to replace the default screw head graphic that represents a
terminal connectionof a terminal in the Connection window and various Panel-Strip reports. You
select a graphic for a particular terminal type and the number of wires connected to the terminal
connection. That is, a specific graphic represents a connector type and whether there is no wire,
a single wire, or multiple wires, connected on that particular side of the terminal.

1. On the Wiring Module window menu bar, click Tables>Terminal >Types.

2. On the Terminal Types dialog box, select a terminal type or create a new one.
3. Click in the G1 box to select a graphic that will represent a terminal connection with a
single wire or without any wire.
4. Click in the G2 box to select a graphic that will represent a terminal connection with a
multiple wires.

NOTES
The selected graphic appears in the G1, G2, or both boxes. The size of the G1 and G2
boxes represents the actual size of the icons that appear in the Connection window.
If you do not select anything in the G1 or G2 box, Smart Plant Instrumentation displays the
default gray screw head for terminal connections with or without single wires and the
turquoise screw head for terminal connections with multiple wires.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 86 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Select a Graphic for a Terminal Connection

This procedure explains how to replace the default screw head graphic that represents a terminal
connectionof a terminal in the Connection window and various Panel-Strip reports. You select a
graphic for aparticular terminal type and the number of wires connected to the terminal connection.
That is, a specificgraphic represents a connector type and whether there is no wire, a single wire, or
multiple wires, connectedon that particular side of the terminal.

1. On the Wiring Module window menu bar, click Tables >Terminal >Types.
2. On the Terminal Types dialog box, select a terminal type or create a new one.
3. Click in the G1 box to select a graphic that will represent a terminal connection with a single wire
Orwithout any wire .
4.Click in the G2 box to select a graphic that will represent a terminal connection with a multiple
wires.

NOTE:

The selected graphic appears in the G1, G2, or both boxes. The size of the G1 and G2
boxesrepresents the actual size of the icons that appear in the Connection window.
If you do not select anything in the G1 or G2 box, Smart Plant Instrumentation displays the default
grayscrew head forterminal connections with or without single wires and the turquoise screw head
forterminal connections with multiple wires.

9.5 Making Connections in SmartPlant Instrumentation

Cables cannot be connected to terminal strips before the connection type is defined. Terminal
connection type defines how the wires are to be connected to a terminal strip, which wire is
connected to which terminal, and so forth. At this stage, you will connect the field wiring (the field
instruments) to the junction box. You will then connect the junction box to the field side of the
Distribution Frame. Subsequently, you will assign cables or Wiring Equipment / Plug and Socket
to MDF and connect them to the Equipment Cabinet of the Distribution Frame. Once the sides are
connected, you will perform an internal cross wiring within the Distribution Frame between the field
side terminals and the Cabinet side terminals.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 87 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Dev. Panels

Connection Type

I/ O

Intr. Safe

Auto wiring

Segment Mgr

Assign
Macro Def.

Smart Plant Instrumentation employs two methods for implementing cable terminations direct
visualconnection, and a more advanced technique called connection type. The connection concept
behind thesemethods is based on the simple idea of letting you work as you would in the field,
meaning that if you install awire and connect it to a panel, for example, you can do exactly the same
on the screen.
The software enables you to make connections by using the drag-and-drop operation in the
Connectionwindow.

You can make the following connections:

Connect cables and cable sets to terminals in single mode this option allows you to connect
cablesone by one to the appropriate terminals.
Connect cables and cable sets to terminals in batch mode this option allows you to
simultaneouslyconnect cables to the appropriate terminals and define their connections.
You can keep more than one Connection window open at the same time. This can be
useful whenviewing the wiring routing.
Dragging a cable, cable set, or wire to a terminal not currently visible in the Connection
window makesthe screen scroll up or down until the required terminal is displayed.
If the width of your computer monitor allows it, you can follow the course of a cable from one
terminalstrip to the other (provided that the cable is connected between two terminal strips).
You can view thecable continuation between two terminal strips by resizing the Connection
window and clicking (orclicking Actions >Adjacent on the Connection window menu bar)
to simultaneously display bothterminal strips.
.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 88 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Connect a Cable or a Cable Set to a Terminal Strip

This procedure explains how to connect a cable or cable set to a terminal strip. The connection is
accomplished by dragging a cable or cable set to a terminal in the Connection window. Then, you
arerequired to define the cable connection, which effects the connection. Note that you can connect
only plantcables and panels and not reference panels and cables. However, while the Connection
window is open,you can copy reference items from the Reference Explorer to the Domain
Explorer and then drag them tothe Connection window.

1. Press F7 to open the Domain Explorer.

2. Expand the Cables folder or a panel hierarchy and then right-click one of the following items:

A cable
A cable set
A panel
A terminal strip
3. On the shortcut menu, click Actions >Connection.
4. In the Connection window, from the Terminal strip list, select an appropriate terminal strip.

NOTE:

If the terminal strip that you need does not exist in the Domain Explorer, you can copy a
referenceterminal strip from Reference Explorer to the Domain Explorer while the Connection
window isopen. (Press F8 to open the Reference Explorer.)

5.In the Domain Explorer, select the cable or cable set that you want to connect.
6. Drag the selected cable or cable set to the appropriate terminal in the data window.

7. Drop the cable or cable set on the required terminal (shown as a screw head ) to open the
CableConnection Definition dialog box.

8.On the Cable Connection Definition dialog box, do the following:

a. Select End 1 or End 2 for the side of the cable that you want to connect.
b. To change the terminal number where the first wire is to be connected, from the Start at terminal
list, select the required terminal.
c. In the Cable set connection details data window, select the cable sets that you want to connect,

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 89 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

or choose Select all cable sets.

d.From the Connection Type list, select the connection type for each cable set that you are going
toconnect.
e.Select L (left) or R (right) for the physical side of the terminal where the cable set enters. Note
thatscrew head indicates that the cable set is already connected on the selected cable end.
f. Click Connect to connect the selected cable sets and return to the Connection window.

NOTE:

Smart Plant Instrumentation connects the individual wires automatically in accordance with the
selectedconnection type.
You can double-click a cable, cable set, wire, terminal, or terminal strip header in the
Connectionwindow to edit it.

Connect Device Cables to a Terminal Strip in Batch Mode

Use this procedure to connect device cables or cable sets to a terminal strip in batch mode. Note
that theseare device cables that are already connected to device panels.

1. Press F7 to open the Domain Explorer.

2. Expand the Panels by Location or the Panels by Category folder to display the existing panels
andterminal strips.
3. Right-click a terminal strip to which you want to connect device cables, and then on the shortcut
menu,click Actions >Batch Connection.
4. In the Domain Explorer, select the device cables that you want to connect and drag them to the
BatchDevice Cable Connection window.

You can only drag those cables that have been connected to device panels on one end
andunconnected on the other end. Also, there cannot be any connectors on the
unconnected end.
You can filter the display of cables in the Domain Explorer so that you can easily find the
devicecables that you need.
Click on the lower toolbar to open a pop-up window that displays which terminals are
connected.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 90 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

The settings displayed under Starting Terminal are determined by the automatic
implementation ofconnection type definitions for the cables that you move to the data
window.
You can change the order of cables in the data window by dragging them up or down.

5. To change the connection type for a given cable set, from the Connection Type list, select an
Appropriate connection type.

6.When changing the connection type for the first cable set, in response to the 'Do you want to
changethe connection type for all cable sets?' prompt, do one of the following:
To change the connection type for all of the cable sets displayed in the data window, click
Yes.
Note that this also results in automatic renumbering of the starting terminals for all of the
cable sets.
To change the connection type for the given cable set only, click No. Note that this results in
noautomatic renumbering of starting terminals.

7. To change the cable set starting terminals, do one of the following:

To change the starting terminal for a given cable set, select a value from the Starting
Terminal list.
To automatically renumber starting terminals according to cable type definitions, from the
selectedcable set and below, click Actions >Reassign.

8.Under Terminal Side accept the default setting L to connect the device cables to the left side of
thepanel, or select R to connect the cables to the right side.

9. Under connect all shields to, do one of the following:

Do not select any terminal. Use this option to connect the shields according to the
configuration ofthe active cable types.
Select a common terminal to which you connect all of the shields.

10. Under Connect all overall shields to, do one of the following:
Do not select any terminal. Use this option to connect the overall shields according to
theconfiguration of the active cable types.
Select a common terminal to which you connect all of the overall shields.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 91 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

11. Do one of the following:

To prepare for the connection of the all of the device cables displayed in thedata window,
clearConnect selected rows only.
To prepare for the connection of some of the device cables displayed in the data window,
select therows that you want to connect and then select Connect selected rows only.

12. To connect the devices cables to the terminal strip according to your settings, do one of the
following:
Click Actions >Connect.
On the lower toolbar, click.

Connect a Wire to a Terminal Strip

This procedure explains how to connect a wire to a terminal strip.

1. Press F7 to open the Domain Explorer.

2. Expand the Panels by Category or Panels by Location folder.

3. Right-click a panel or a terminal strip and then on the shortcut menu, click Actions >Connection.

4. If, in the Domain Explorer, you selected a panel and not a terminal strip, in the Connection
Window, select one from the Terminal Strip list.

5. In the Domain Explorer, select a cable and expand its hierarchy to display its wires.

6. Select a wire and drag it to a terminal (shown as a screw head ) in the Connection window.

NOTE:

Click to find a specific terminal or the next available terminal. Smart Plant Instrumentation

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 92 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Marksyour terminals with .

7. On the Wire Connection Options dialog box, select the wire that you require and then click OK.

NOTE:

If you are connecting more than one wire in a cable or cable set to a group of terminals on a
terminalstrip, make sure that the wire end that you connect is the same for all the wires. This is
important toensure that the connections appear correctly in reports.
If one end of the wire is already connected, SmartPlant Instrumentation selects the loose end by
default.

Move Cables, Cable Sets, and Wires

After making initial connections to terminals, SmartPlant Instrumentation lets you relocate cables,
cable sets,and wires to another terminal on the same terminal strip. You can move a wiring item
using the drag-anddropfeature.

1. In the Connection window, select the appropriate cables, cable sets, or wires.
2. Drag the selected items to another terminal. If you are moving a cable or a cable set, the Cable
Connection Definition dialog box opens. If you are moving a wire, the Wire Connection
Optionsdialog box opens.
3. Select the required definitions on the Cable Connection Definition dialog box or on the Wire
Connection Options dialog box and then click Connect or OK respectively.

NOTE:

The Connection window reopens showing the new connections.

You should ensure that there are sufficient terminals to accommodate all the wires that you want to
move.
You can connect any number of wires to a single terminal.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 93 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

If you are connecting more than one wire in a cable or cable set to a group of terminals, make sure
thatthe wire end that you connect is the same for all the wires. This is important to ensure that the
connections appear correctly in reports.

Disconnect Cables, Cable Sets, and Wires

This procedure shows how to disconnect a given cable or selected cable sets and wires from a
terminal strip.

1. In the Connection window, select the cable, cable sets, or wires you want to disconnect.

2. In the Connection window, do one of the following:

Right-click the selected item then click Disconnect on the shortcut menu.
On the menu bar, click Connection >Disconnect.
Click on the Connection toolbar.

NOTE:

If a terminal strip or terminal is connected to more than one cable, only wires which are unique to
aterminal or which belong to a cable at the top level layer (at the front) will be disconnected by Smart
PlantInstrumentation.
SmartPlant Instrumentation uses to represent terminals on which multiple wires are connected.
To ensure disconnection of the correct cables or cable sets, first move the cable you want to
disconnectto front by selecting it from the Cable name list.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 94 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Add Jumpers to the Existing Wiring

SmartPlant Instrumentation enables you to create and connect multiple jumpers in a repetitive way.
You candefine constant gaps between the jumpered terminals if required. Also, you can jumper the
last remainingterminal in the selected terminal pattern if required. Note that unlike regular wires,
jumpers do not propagatesignals. You can assign a wire group to a jumper manually on the
Terminal Connection dialog box.

1. Press F7 to open the Domain Explorer.

2. Expand the Panels by Location or the Panels by Category folder to display the existing panels
andterminal strips.

3. Right-click a panel or a terminal strip and then on the shortcut menu, click Actions >Connection.

4. In the Connection window, select a wire connected to the terminal that will be the first terminal
connected to the first jumper.

NOTE:
Do not make any selection if you want the terminal connected to the first wire to be the connected
to the first jumper.

5. In the Connection window, do one of the following:

Right-click the selected wire and then on the shortcut menu, click Connect Jumpers.
Click Connection >Connect Jumpers.
Click

6. On the Connect Jumpers dialog box, do the following:

a. From the Terminal one first jumper list, select a terminal and set its Left or Right orientation.
b. From the Terminal two first jumper list, select a terminal and set its Left or Right orientation.
c. If you need to define a constant gap between the jumpered terminals, enter a value in the
Intervalbetween jumpers box.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 95 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

d. From the Last terminal list, select the last terminal in the pattern that you want to jumper.
e. Select the Jumper the last terminal check box if you want to jumper the last remaining terminal
inthe terminal pattern.
f. Select a jumper color.
g. In the Jumper name box, type the name of the new jumper, or accept the default setting. By
default, SmartPlant Instrumentation suggests a name for a new jumper of the format
J<first terminal name>/<second terminal name>. You can change the preferences so as not
to displaya suggested jumper name.
h. Click OK.

Set Preferences for Automatic Naming of Jumpers

1. Click File >Preferences.

2. Expand the Wiring hierarchy in the tree view and select Jumpers.
3. Under Automatic naming, select Name jumpers automatically.
4. Click OK.

Remove a Jumper from the Existing Wiring

This procedure explains how to remove a jumper.

1. In the Connection window, select a jumper you want to remove.
2. Do one of the following:
Right-click the selected jumper and then on the shortcut menu, click Disconnect.
On the Connection window menu bar, click Actions >Disconnect.
Click

NOTE:

Jumpers exist in the database as long as they are connected. Disconnected jumpers are deleted
fromthe database.
You cannot move a jumper. Instead, disconnect the jumper that you do not need and then add a
newjumper as required.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 96 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

9.4. Updating Connection Data

Multiple users can work on the same module. In most cases, you may not edit data that is being
edited byanother user, however, under certain circumstances; other users may have made changes
that affect thedata in the Connection window. For example, another user has added a new plant
cable. This cable doesnot appear in the Domain Explorer until you refresh the window display.Click
torefresh the displayedconnection data.

The Connection window is automatically refreshed only when you open it. However, SmartPlant
Instrumentation does not refresh the data in the Connection window, if you have several instances
of theConnection window open and you switch from one Connection window to another.

9.5. View Cable Connection Destinations

This option enables you to view the connection destinations of a cable that you select in the
DomainExplorer. When you select this option, you see the junction boxes and terminals that the
selected cable isconnected to.

1. In the Domain Explorer, double- click the Cables folder.

2. Right-click a cable.
3. On the shortcut menu, click Actions >Destination.

NOTE:

The Cable Destination pop- up window displays individual connections for the selected cable. Note
that each line shows a connection to a different panel.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 97 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Display Adjacent Connections of a Cable

When you are working on wiring connections for a specific panel, you can follow the wiring routing
to anadjacent panel.

1. In the Connection window, select a cable, cable set, or wire whose routing you want to trace on
aparticular terminal side.

NOTE:

If you select a cable or cable set, SmartPlant Instrumentation displays the adjacent connection for
the first wire. You can follow the routing for the other wires by selecting other panels from the list.

2. Do one of the following:

On the menu bar, click Actions >Open Adjacent Connection.
Right-click the selected item and then on the shortcut menu, click Open Adjacent
Connection.

Click on the lower toolbar.

NOTE:

The Connection window opens, showing the adjacent panel which is the continuation of the
wiring routing.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 98 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

9.6. Trace a Signal in a Point-to-Point Wiring Diagram

You can follow a signal along a sequence of wires. SmartPlant Instrumentation uses wire groups,
grouplevel and group sequence data to follow a signal along a series of wires and check for any
discontinuity. Thewire group is the signal name representing the tag number from which the signal
originates. The result isdisplayed in a point-to-point wiring diagram that you can print.

1. Do one of the following to open the Point-to-Point Wiring Diagram:

In the Domain Explorer, right-click a cable, cable set, panel, or a terminal strip and then on
theshortcut menu, click Actions >Connection. For best results, make sure that the
connectioninformation is complete for the items that you selected.
In the Domain Explorer, right-click a cable, cable set, panel, or a terminal strip and then on
theshortcut menu, click Actions >I/O Assignment. For best results, make sure that the
I/Oassignment information is complete for the items that you selected.
2. In the Connection window, from the Terminal strip list, select the terminal strip to which you
want totrace the signal path.

3. From the Cable list, select the cable containing the wire for which you want to trace the signal
path.

4. Do one of the following:

In the Connection window, select the wire for which you want to trace the signal path.
In the I/O Assignment window, under Channel Assignment, select a channel associated
with an instrument tag.

5. Click to locate a specific terminal or channel.

6. Do one of the following to generate the Point to Point Wiring Diagram report:

On the module toolbar, click .

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 99 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

On the menu bar, click Reports >Point to Point Wiring Diagram.

In the Connection window, right-click the selected wire and on the shortcut menu click
Point toPoint Wiring Diagram.

7. Do one of the following when prompted to preview the report:

Click Yesto preview the Point to Point Wiring Diagram.
Click No to print the report without displaying it on your computer.

NOTE:

To view the point-to-point diagram legend, scroll down to the lower part of the preview.
To hide the default notation of level and sequence of the signals and tags, click View
>ShowLevel/Sequence. To display the notation, click again.
You can resize the fonts of the cable and cable set names in the Point to Point Wiring Diagram.

9.7. Cross Wiring

Cross wiring in Smart Plant Instrumentation allows you to connect two terminal strips by using a
cross-wiringcable. You can cross wire two terminal strips that belong to two different panels or the
same panel.
The following cross-wiring options are available:
Manual Cross Wiring This is the default cross wiring mode, where you select the terminals on
thestrips to be cross-wired.
Semiautomatic Cross Wiring Smart Plant Instrumentation automatically finds potential targets
for thesignal that it will propagate. You can accept the suggested terminals and carry out the cross
wiring orselect different terminals to be cross-wired.
Automatic Cross Wiring Smart Plant Instrumentation automatically finds matching signals
andperforms the cross wiring for you.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 100 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Perform Manual Cross Wiring

Manual cross wiring is the default mode for cross wiring. In this mode, you select the terminals that
you wantto cross wire, select the required cross-wiring cable and then carry out the cross wiring.

1. Press F7 open the Domain Explorer and select one or more terminal strips for potential cross
wiring.You can also select a panel or several panels if required.

2. Right-click the items you selected and then on the shortcut menu, click Actions >Cross Wiring.

3. In the Cross Wiring window, select the required terminal strip from the Primary terminal strip
list.

NOTE:

To add terminal strips that do not appear on the list, clickbeside the Primary terminal strip
list arrow, select the required terminal strips in the Domain Explorer, then click OK to add them to
thePrimary terminal strip list.

4. Under Primary connection side, click Left or Right to select the appropriate side of the
secondaryterminal strip that you want to connect.

5. From the Secondary terminal strip list, select the required terminal strip that you want to cross
wire.

NOTE:

To cross wire two terminal strips belonging to different panels where you did not select one of the
panels in Cross Wiring, clickbeside the Secondary terminal strip list arrow, select the requiredterminal strip
in theDomain Explorer and click OK to add it to the Secondary terminal strip list.Then, select that terminal
strip from the Secondary terminal strip list for cross wiring.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 101 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

6. Under Secondary connection side, click Left or Right to select the appropriate side of the
secondaryterminal strip that you want to connect.

7. From the Cross-wiring cable list, select one of the following to define a cross-wiring cable:

Select CROSS WIRE to cross wire the terminals with wires that the software creates during
thecross-wiring process.

Select the required cross- wiring cable. If the cross wiring cable that you need is not on this
list,click beside the list arrow to open the Wiring Explorer. Select a cable and click
OK toadd it tothe list. Note that you can also create a new cross wiring cable if the one you
need does not exist inthe Domain Explorer.

8. Select the Prompt for cross operation message check box to be prompted by SmartPlant
Instrumentation to confirm the cross wiring. If you do not select this check box, cross wiring of the
selected terminals proceeds without messages and SmartPlant Instrumentation propagates all the
existing signals.

9. In the Primary Terminal Strip pane, click the required terminal to be cross-wired.

10. In the Secondary Terminal Strip pane, click the required terminal to be cross- wired.

11. If you selected the Prompt for cross operation message check box, click Yes to confirm the
crosswiring.

NOTE:

In the Primary Terminal Strip pane, select the required cross-wired terminal, and then clickto openthe
Point-to-Point Wiring Diagram.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 102 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Click to open the Terminal Connection window. You can also double click to get the same result.

Click to remove the cross wiring between two terminals after selecting the cross- wired terminals(shown
connected by a solid black line).

Click to generate a report that shows all the wiring connections of the primary strip on both sides.

Perform Semiautomatic Cross Wiring

Semiautomatic cross wiring enables you to find matching signals between two terminal strips
(primary andsecondary). That is, SmartPlant Instrumentation can find for you a potential target for
the signal that thesoftware propagates after you perform cross wiring. You can then use this
potential target to quickly effectthe required cross wiring. The terminal that SmartPlant
instrumentation finds for you in the secondaryterminal strip is a recommendation only and you are
free to accept it or select a different terminal, as yourequire.

1. Press F7 open the Domain Explorer and select one or more terminal strips for potential cross
wiring.
You can also select a panel or several panels if required.
2. Do one of the following to open the Cross Wiring window:

Click Actions > Cross Wiring.

Click

3. In the Cross Wiring window, select the required terminal strip from the Primary terminal strip
list.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 103 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

NOTE:

To add terminal strips that do not appear on the list, click beside the Primary terminal striplist arrow, select
the required terminal strips in the Domain Explorer, then click OK to add them to thePrimary terminal strip
list.

4. From the Secondary terminal strip list, select the required terminal strip that you want to cross
wire.

NOTE:

To cross wire two terminal strips belonging to different panels where you did not select one of the

panels in Domain Explorer, click beside the Secondary terminal strip list arrow, select

therequired terminal strip in the Domain Explorer and click OK to add it to the Secondary terminal striplist.
Then, select that terminal strip from the Secondary terminal strip list for cross wiring.

5. Under Secondary connection side, click Left or Right to select the appropriate side of the
secondaryterminal strip that you want to connect.

6. From the Cross-wiring cable list, select one of the following to define a cross-wiring cable:

Select CROSS WIRE to cross wire the terminals with wires that the software creates during
thecross-wiring process.
Select the required cross- wiring cable. If the cross wiring cable that you need is not on this
list,click beside the list arrow to open the Domain Explorer. Select a cable and click
OK to add itto the list. Note that you can also create a new cross wiring cable if the one you
need does notexist in the Domain Explorer.

7. Select the Prompt for cross operation message check box to be prompted by SmartPlant

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 104 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Instrumentation to confirm the cross wiring. If you do not select this check box, cross wiring of
theselected terminals proceeds without messages and SmartPlant Instrumentation propagates all
theexisting signals.

8. In the Primary Terminal Strip pane, click the required terminal to be cross-wired.

9. Do one of the following to find a matching target signal for potential cross wiring:
Click View >Target Signal.
Click .

SmartPlant Instrumentation searches for a matching signal in the current <plant> and adds the
terminals that it finds in the Secondary Terminal Strip pane. SmartPlant Instrumentation indicates
each of the potential terminals by placing an arrow beside it in the Secondary Terminal Strip
pane.

10. Select the required terminal in the Secondary Terminal Strip pane to cross wire with the
selectedterminal in the primary terminal strip.

Perform Automatic Cross Wiring

Automatic cross wiring enables you to instruct SmartPlant Instrumentation to automatically find
matchingsignals for you and cross-wire the relevant terminals in a single operation. Two signals
match if:

The signals are between two terminal strips belonging to the same panel.
Both signals are on the same signal level.
The first signal comes to the first terminal from a device panel (the signal sequence is less
than 50) and the second signal comes from a control system ( the signal sequence is
greater than 50)

You can set the default definitions for matching signals by using the Preferences dialog box.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 105 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

1. Press F7 open the Domain Explorer and select one or more terminal strips for potential cross
wiring.You can also select a panel or several panels if required.
2. Right-click the selected item and on the shortcut menu, click Actions >Cross Wiring.
3. In the Cross Wiring window, select the required terminal strip from the Primary terminal strip
list.
4. Under Primary auto cross- wiring side, click Left or Right to select the appropriate side of the
primaryterminal strip that you want to connect.
5. From the Secondary terminal strip list, select the required terminal strip that you want to cross
wire.

6. Under Secondary connection side, click Left or Right to select the appropriate side of the
secondaryterminal strip that you want to connect.

7. From the Cross-wiring cable list, select one of the following to define a cross-wiring cable:

Select CROSS WIRE to cross wire the terminals with wires that the software creates
during thecross-wiring process.

Select the required cross- wiring cable. If the cross wiring cable that you need is not on
this list,click beside the list arrow to open the Domain Explorer. Select a cable and click
OK to add itto the list. Note that you can also create a new cross wiring cable if the one
you need does notexist in the Domain Explorer.

8. Select the Prompt for cross operation message check box to be prompted by SmartPlant
Instrumentation to confirm the cross wiring. If you do not select this check box, cross wiring of the
selected terminals proceeds without messages and SmartPlant Instrumentation propagates all the
existing signals.

9. Do one of the following to find matching signals:

Click Actions >Auto
Click .

SmartPlant Instrumentation finds and selects the matching signals and the terminals that it can

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 106 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

cross- wire automatically. The Secondary Terminal Strip pane does not appear in the
CrossWiringwindow.

10. Do one of the following:

Click to cross wire the selected terminals. SmartPlant Instrumentation replaces the
selectionwith a solid black line indicating that the cross wiring has been done.
Click to discard the selection made by the software and return to manual mode.

11. After the software cross wired the terminals, click to return to manual mode.

Create a Cross Wiring Cable

1. In the Cross Wiring window, click beside the Cross-wiring cable list arrow to open the
DomainExplorer.
2. Right-click the Cross Cables folder, and on the shortcut menu, click New >Cross Cable.
3. In the Cable Properties dialog box, enter the required values and then click OK.
4. Select the new cable in the Domain Explorer and click OK to add this cable to the Cross-wiring
cablelist.
5. Select the new cable in the Cross-wiring cable list to be used in the cross wiring operation.

Generate a Panel Strip Report from the Cross Wiring Window

This option enables you to generate a panel - strip report that displays the connections and adjacent
Connections for the terminal strip you selected from the Primary terminal strip list in the Cross
Wiringwindow.

1. Do one of the following in the Cross Wiring window:

Click Reports >Panel- Strip.
Click on the module toolbar.

2. Click Yes to open the print preview or click No to print the report without displaying it on your screen.
NOTE: A Panel-Strip report (with adjacent connections, no style), cannot be printed on a portrait orientated A4
page.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 107 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

9.8. Auto- Wiring

Auto-wiring allows you to make automatic batch connections between specified terminal strips. This
featurefacilitates faster and more efficient wiring design especially when working on a grass-root
project where therequired wiring items already exist and you need to connect them. The essence of
this feature is that youcreate an auto-wiring routing task where you define a cable that will connect
two designated panels.

You can define an auto-wiring task for two different kinds of connection:
A connection between two existing panels.
A connection between a panel and a control system that will create cross wires or cross
cables.

There are two prerequisites for auto-wiring routing tasks:

The required panels and terminal strips must already exist.

The required reference cables and connection types must be defined and ready for use.

Furthermore, for cross wiring auto-wiring routing tasks, you must also ensure the following before
you startdefining your task:
The required instrument tags and their device panels already exist and they are connected
to theirjunction boxes.
There are instrument tags with pre-assigned I/O points essential for cross-wiring tasks.
There are defined reference wiring profiles for the required instrument types.

Defining and Executing Auto-Wiring Tasks

An auto-wiring task is a list of commands that SmartPlant Instrumentation runs according to pre-
selectedparameters. You define the End 1 and End 2 connections as well as the cable that
SmartPlantInstrumentation uses to make the connection. The cable that the software uses to make
the connection isautomatically created by the software. The definition of this cable is based on the
reference cable that youselect. The software checks whether a cable based on the selected
reference cable exists in the DomainExplorer and whether this cable has a sufficient number of
unconnected cable sets. If not, SmartPlantInstrumentation creates a new cable based on the
selected reference cable to accommodate the requiredconnections. You can customize the cable
name as needed or accept the suggested names. The softwareproposes cable end names based
on the names of the panels to be connected to End 1 and End 2. Anyadditional cables that the
software creates have identical names with a numeric suffix that is incremented byone for each new
cable; for example XYZ.1, XYZ.2, and so forth.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 108 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Flow of Activities for Auto-Wiring

The following is a suggested flow of auto-wiring activities. The sequence in which you perform these
activities depends on your work preferences. In any case, make sure that you perform the first four
steps inthe following list before proceeding further.

1. Define a view profile for a new Auto-Wiring Routing Task browser in the Wiring group of the
Browser Manager.
2. Add and define a new view for the Auto-Wiring Routing Task browser.

3. If needed, define a view profile for the JB Pre-Assignment browser in the Instrument Index
group ofthe Browser Manager and then add and define a new view for the JB Pre-Assignment
browser.

4. Pre-assign the required junction boxes to tag numbers.

5. Connect the junction boxes to the device panels using one of the following methods:

6. Use the Device Cable Batch Connection feature.

Execute the auto-wiring routing task.

Connect the junction boxes manually.

7. Continue connecting the rest of the junction boxes.

8. Create and run a new auto-wiring routing task to connect the last junction box to the control
system (oranother type of panel).

Pre-Assign Junction Boxes to Device Panels

You use this feature to pre-assign specific junction boxes to selected instruments. This pre-
assignmentserves several purposes:

Pre-assign the required junction boxes to define an Auto-Wiring routing task.

Connect multiple pre-assigned device cables in batch mode.
Filter the display of cables in the Domain Explorer so that only pre-assigned device
cables forconnection with junction boxes are displayed.

1. On the main toolbar, click to open the Browser Manager.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 109 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

2. Expand the Instrument Index browser group.

NOTE:

You can also click on the Auto-Wiring Browser View toolbar to open the JB Pre-Assignment
Browser View window.

3. Select the JB Pre-assignment browser and add a new browser view to this browser.

IMPORTANT:

Make sure that you select the Set as default view check box if you want to use the newbrowser view for
auto-wiring.

4. Click to open the new view.

5. In the Browser View window, highlight the required tag number to which you want to assign a
junctionbox.
6. Click in the Junction Box Name field and select an appropriate junction box that will be
pre-assigned tothe highlighted instrument tag.

NOTE:

If a junction box has already been connected to a device panel, the Junction Box Name field displays the
name of the connected junction box and you cannot rename the junction box here.

7. Click in the Strip Name field and select the required strip in the pre-assigned junction box.
8. Repeat steps 5 through 7 for each device panel to which you want to pre-assign a junction box.
9. Edit the data in the Browser View window as required and close the Browser View window.
Save the data when prompted.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 110 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

NOTE:

You can now select the appropriate junction boxes and perform batch connection of device cables in
theBatch Device Cable Connection window.
You can define an Auto-Wiring routing task.
You can filter the display of device cables in the Domain Explorer.

Auto-Wire Pre-Assigned Junction Boxes

This procedure explains how to define and execute an auto- wiring task for a pre-assigned junction
box.Note that you must pre-assign the required junction box and make all the required preparations
prior todefining and executing a task.

1. Start the Wiring module.

2. On the menu bar, click Actions >Auto-Wiring.
3. In the Browser View New Auto-Wiring Routing Task window, select the new task and do one
of thefollowing:

Click Actions >Edit Task.

Click .

The Auto-Wiring Routing Task dialog box opens where all the End 1 connection properties
except for the Connection type and Overall shield terminal connection have been defined. You
canaccept the displayed values or modify them as needed.

4. On the Auto-Wiring Routing Task dialog box, complete the End 1 connection definition as
follows:
a. Select the required connection type from Connection type list.
b. If required, select the appropriate overall shield terminal connection.

5. Do not select the Control system check box, define the end 2 connection of the auto-wiring
cable as follows:

a. Click next to the Panel field to select the required panel.

b. In the Domain Explorer, select a panel that contains at least one terminal strip with unconnected

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 111 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

terminals and then click OK.

c. Select a terminal strip from the Strip list.
d. Select a terminal that will serve as the first terminal.
e. Select a terminal side.
f. Select a connection type.
g. If required, select an appropriate overall shield terminal connection.
h. Use the options in the Cable group box to define the cable that SmartPlant Instrumentation will
useto connect the two panels:
i. From the Reference cable list, select the appropriate reference cable that SmartPlant
Instrumentation will use as the source for the creation of a cable that will connect the two panels.
The software duplicates the new cable in the Domain Explorer.
j. In the Cable name data field, accept or type the name of the cable that SmartPlant
Instrumentationwill create to connect the two panels. The cable names suggested by the software
are composedof the End 1 and End 2 panel names. Additional cables have their names
incremented by one, forexample XYZ.1, XYZ.2, and so forth.
k. Click OK to complete the task definition and return to the Auto-Wiring Browser View New
Auto-Wiring Routing Task window.

7. In the Browser View New Auto-Wiring Routing Task window, click

NOTE:

After notifying you that the task has been executed successfully, the task status changes to Done.
You can open the Connection window for the selected junction box to display the adjacent
connection tomake sure that the auto-wiring task has been executed correctly.

Auto-Wire Two Panels

This procedure explains how to define and execute an auto- wiring task for two panels (regardless
of theirsignals). Note that you must make all the required preparations prior to defining and
executing a task.

1. Start the Wiring module.

2. On the menu bar, click Actions >Auto-Wiring.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 112 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

3. In the Browser View New Auto-Wiring Routing Task window, select the new task and do one
of thefollowing:

Click Actions >New.

Click .
4. On the Auto-Wiring Routing Task dialog box, define the End 1 connection as follows:
a. Click next to the Panel field to select the required panel.
b. In the Domain Explorer, select a panel that contains at least one terminal strip with unconnected
terminals and then click OK.
c. Select a terminal strip from the Strip list.
d. Select a terminal that will serve as the first terminal.
e. Select a terminal side.
f. Select a connection type.
g. If required, select an appropriate overall shield terminal connection.

5. In the End 2 connection group box, do the following:

a. Click next to the Panel field to select the required panel.

b. In the Domain Explorer, select a panel that contains at least one terminal strip with unconnected
terminals and then click OK.
c. Select a terminal strip from the Strip list.
d. Select a terminal that will serve as the first terminal.
e. Select a terminal side.
f. Select a connection type.
g. If required, select an appropriate overall shield terminal connection.
h. Use the options in the Cable group box to define the cable that SmartPlant Instrumentation will
useto connect the two panels:
i. From the Reference cable list, select the appropriate reference cable that SmartPlant
Instrumentation will use as the source for the creation of a cable that will connect the two panels.
The software duplicates the new cable in the Domain Explorer.
j. In the Cable name data field, accept or type the name of the cable that SmartPlant
Instrumentationwill create to connect the two panels. The cable names suggested by the
software are composedof the End 1 and End 2 panel names. Additional cables have their
names incremented by one, forexample XYZ.1, XYZ.2, and so forth.
k. Click OK to complete the task definition and return to the Auto-Wiring Browser View New

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 113 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Auto-Wiring Routing Task window.

6. In the Browser View New Auto-Wiring Routing Task window, click .

Auto-Wiring Task Statuses

After you define an auto-wiring task, SmartPlant Instrumentation assigns it a status. Tasks can have
different statuses that are set according to the task definitions. You can change certain task
statuses ifneeded.
The following table defines the various task statuses and explains which statuses you can change.

Status Description Can Be Changed To

New A newly created task that has not yet beenexecuted. Hold
Hold A task that has been put on hold.This task cannot be executed Execute
until you changeits status to Execute.
Execute A task whose status has been changed from Cannot be changed
Hold.This task can be executed.
Done A task that has already been executed.Such a task cannot be Cannot be changed
executed again.

Change an Auto-Wiring Task Status

After you define an auto-wiring task, SmartPlant Instrumentation assigns it a status. Tasks can have
different statuses that are set according to the task definitions. You can change certain task
statuses ifneeded.

1. In the Auto-Wiring Browser View window, right-click a task.

2. On the shortcut menu, click Task Status.
3. Click the option that you require.

9.11 Example of Creating Reference Junction Boxes and Terminal Strips

1. Press F8 to open the Reference Explorer.

2. Click the Panels folder.

3. Right-click the Junction Boxes folder, and on the shortcut menu, click New >Junction Box
(Generic).

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 114 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

4.Complete
lete the information in the Junction Box dialog box as follows.

5. Click OK.

6. To view the new junction box in the Reference Explorer,, expand the Junction Boxes folder by
clicking it.

7. To add a terminal strip, right-click

right the new junction box and on the shortcut menu, click New
>Terminal Strip.

8. On the Strip Terminal Configuration dialog box, click New.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 115 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

9. On the Terminals in Pattern dialog box, enter 3 and click OK.

10. Enter information for the new

ne strip configuration as shown.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 116 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Terminal Strip
Strip: To be filled
in
Mounting
Mounting: NA
Type:NA
NA
Dimension
Dimension: NA
Rail:NA
NA
Model: NA
Sequence: To be filled in

11. Click Save to save the configuration, then clickCreate

click to create the terminal strip.

12. On the Terminal Strip Properties dialog box, click in the Terminal strip field and name the
terminal strip 16 inst+ind. shield and then click OK.
13. If you want to Edit the Terminals,
Terminals In the Reference Explorer,, expand Panel 16
INSTRUMENTS
NSTRUMENTS WITH I/S.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 117 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

14.. Scroll down to the third terminal of the terminal strip (the one labeled 1SH) and select it.

15. Right-click
click this terminal and then on the shortcut menu, click Properties
Properties.

16. In the Terminal field, change 1SH to 1sh.

17. Click OK and observe the change in the Reference Explorer.

18.. Now change the value back to 1SH again.

9.9. Creating
reating Terminal Strips with Main Distribution Frame

You will now create terminal strips for JB SIDE-1and JB SIDE-2

2 to accommodate your junction box
cables (field side) within this Main Distribution Frame:

Create JB SIDE-1

1. Press F8 to open the Reference Explorer.

2. Click the Distribution Frame folder.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 118 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

3. Right-click Distribution Frame80

80 DF-00000,
DF , and on the shortcut menu click New >Terminal Strip.

4. On the Strip Terminal Configuration dialog box, select the configuration 2 TERMINALS +
SHIELD (this is the same configuration you used for the junction box).

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 119 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

5. Click Create to open the Terminal Strip Properties dialog box.

6. Complete the Terminal Strip Properties dialog box as shown.

7. Click OK to return to the Strip

St Terminal Configuration dialog box.

8. In the Reference Explorer,

Explorer expand the Distribution Frame80 DF-00000
00000 to view the newly
created terminal strip.

9. In the Reference Explorer,

Explorer right-click JB SIDE-1.

10. On the shortcut menu, click Duplicate.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 120 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

11. On the Terminal Strip Properties dialog box, change the terminal strip name to JB SIDE-2.

12. Click OK to accept the new values and close the dialog box.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 121 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

10. ENERATING TELECOM REPORTS COMMON TASKS

The following tasks are used frequently when you generate telecom reports.

10.1 Generate a Telecommunication Device List

This option enables you to generate a report that lists all the existing telecommunication devices in
the current <unit> or all the <units> in the current <plant>. The report lists all tag numbers (telecom
devices), their service, device types and line numbers, location layouts, field equipment and signal
levels, manufacturers and models, as well as the fire areas and load data. You generate this report
in the Instrument Index module.

A. Switch to the Instrument Index module.

B. In the Instrument Index window, click Reports>Telecom Devices.

C. On the Report Selection Options, select one of the following options:

Current < Unit> - include the telecom devices belonging to the current<plant> only.
Current <Area>- include the telecom devices belonging to the current<area> only.
All<Units>-include the telecom devices belonging to all the <unit> in the
current<plant>.

D. When prompted to preview the new report, click YES. Click NO to print out the report without
opening its print preview..

10.2 Generate a Telecom Field Equipment Report

This option enables you to generate a list of all the existing telecom field equipment. The
report lists the equipment ex- code, IS code gas group, temp. class, frequency code, effect,
and the telecom ID number.

A. Switch to the Instrument Index module.

B. In the Instrument Index window, click Reports > Telecom Tables > Telecom Field
Equipment.
C. When prompted to preview the new report, click Yes. Click No to print out the report
without opening its print preview.

10.3 Generate a Speaker Load Report

This option allows you to generate a report that displays all the field device panels
connected to a specific channel in a selected equipment card.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 122 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

A. In the Wiring Module window, click Reports>Telecom

B. On the Report Selection Options, select one of the following options:

Single Speaker Report

Amplifier Actual Load Report
Amplifier Speaker Load Report

C. When prompted to preview the new report, click Yes. Click No to print out the report
without opening its print preview.

10.4 Create a Cable Block Diagram

This procedure shows how to create a new cable block diagram, add items, show already
connected cables, and connect cables between the items. Using
Using symbols supplied with the
software you drag and drop items where you want to position them within the drawing. When you
connect cables between the different items of equipment, the software checks that the connection
point is valid, and makes the connection.
connection. If no connection point is available the software does not
allow the cable to be connected.

1. On the Domain// Telecom Explorer, locate the Drawings folder.

2. In the Drawings folder, locate the Cable Block Diagram folder.
3. Right-click the Cable Block Diagram
Diagr folder, and from the shortcut menu select New >
Block Diagram.
4. On the Document Properties (New) dialog box, type a value for the Document number
and Description fields.
5. Click OK.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 123 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

6. In the Cable Block Diagram folder, right-click

click your new document, and ffrom the shortcut
menu select Reports > Generate Cable Diagram.
Diagram

7. At the prompt, click Yes to preview your drawing, a new blank drawing opens in the
Enhanced Report Utility.
8. In
n the Enhanced Report Utility, open the Domain Explorer by doing one of the ffollowing:
Press F7
Click Tools>Domain
Domain/Telecom Explorer

Click

9. From the Domain /Telecom Explorer in the Enhanced Report Utility drag the panels you
require, and position them on the drawing.

10. Click to allow the software to automatically regenerate your drawing, and show any
cables and there connections between the physically wired items.
11. To make the connections between the items manually, do the following:
12. Select any item on the drawing and do one of the following:
Click Activate Connection Mode
Click Edit
dit > Activate Connection Mode
13. On the Domain// Telecom Explorer select the cable you want to connect between two item items.
14. Move the cursor over the drawing to view the available, valid connect points of the items and
cable category on your drawing.
drawing
15. Click the connect
onnect point of the item you want the cable to connect 'From'.
16. Click the connect point of the item you want the cable to connect 'To'.
17. Select another cable or click View > Refresh to view the drawing with the cable attached.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 124 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Add Cables and Objects to an Existing Cable Block Diagram

This procedure shows you how to add cables and items to an existing cable block diagram.

1. Open the Cable Block Diagram that you want to add items to.
2. In the Enhanced Report Utility, open the Domain Explorer by doing one of the following:
Press F7
Click Tools > Domain/Telecom Explorer

Click
3. From the Domain /Telecom Explorer in the Enhanced Report Utility drag the objects you
want to add to the drawing, and position them on the drawing.

4. Click to allow the software to automatically regenerate your drawing, and show any
cables and there connections between the physically wired items.
5. To make the connections between the items manually, do the following:

b. Select any item on the drawing and do one of the following:

Click Activate Connection Mode

Click Edit > Activate Connection Mode.

c. On the Domain Explorer/Telecom select the cable you want to connect between
two items.
d. Move the cursor over the drawing to view the available, valid connect points of the
items and cable category on your drawing.
e. Click the connect point of the item you want the cable to connect 'From'.
f. Click the connect point of the item you want the cable to connect 'To'.

6. Select another cable or click View>Refresh to view the drawing with the cable attached.

View an Existing Cable Block Diagram

This procedure shows you how to view an existing cable block drawing.

1. On the Domain/Telecom Explorer, locate the Drawings folder.

2. In the Drawings folder, locate the Cable Block Diagram folder.
3. In the Cable Block Diagram folder, right-click the drawing you want to view, and from the
shortcut menu select Reports>Generate Cable Diagram.
4. At the prompt, click Yes to preview your drawing, the drawing opens in the Enhanced Report
Utility.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 125 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Disconnect Cables from Items in a Cable Block Diagram

This procedure shows you how to disconnect cables from items on your drawing.

1. Open the Cable Block Diagram that you want to disconnect cables from.
2. Select the cable you want to disconnect.
3. Do one of the following:

Click

Click Edit > Disconnect.

Right-click, and on the shortcut menu, click Disconnect Items.

4. At the prompt, select the required check box, and click OK.

NOTE :

If the cable for disconnection is only connected to one item, no prompt will appear
and the cable is disconnected automatically.
Disconnecting both sides of the cable results in the loss of any wiring associated
with the connection.

Associate Cable with a Panel

You use the Associate Cable with Panels feature in conjunction with cable block
diagrams, to associate a specific cable to specific panels. When you use the cable in
your cable block diagram the panels that are associated with the cable are automatically
placed on your drawing along with the cable.By dragging panels from the Domain
Explorer to the Associate Cable with Panels window you can associate the panel with
either side of the cable. You can see which panels are already associated or connected
to the cable and to what side of the cable the panel is associated. Also you can move a
panel from one side of the cable to the other.

1. In the Telecom Explorer, navigate to the Cables folder.

2. Open the Cables folder, and select the cable you want to associate with a panel.

Tip: You can choose more than one cable at the same time by clicking the required
cables in the Itemspane in the Domain/Telecom Explorer. In the Associate Cable with
Panels window, you choose the cable that you want to associate to a panel from the
Cable pick list in the window.

3. Right-click the cable, and from the shortcut menu, click Actions>Associate Panels, the
Associate Cable with Panels window opens.

Tip: The Associate Cable with Panels window shows the physically connected panels
as well as the associated panels. A cable that is already associated to a panel,
displays next to the panels name.
A cable that is physically connected to a panel, displays next
to the panels name.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 126 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

4. In the Domain/Telecom Explorer, navigate to the Panels by Category folder.

5. Locate the required panel you want to associate with the cable.
6. From Panels by Category folder, drag the required panel icon on to the Cable End One
or Cable End Two column of the Associate Cable with Panels window.
TIP:
You can associate more than one panel with the required cable.
To change a panels cable end association, drag the panel from one cable end
column to the other cable end column.

7. Close the Associate Cable with Panels window, click Yes at the prompt to save the
associations.

NOTE:

Cable relationships which were manually associated with panels are not removed
or deleted by the software when physically connected with the panels.
The relationship between the physically connected panels and the cable shown in
the Associate Cable with Panels window cannot be deleted. They are removed
when the cable is disconnected.
The Associate Cable with Panels window does not display, or take into
consideration, pre-assigned panels or junction boxes that were assigned using
instrument connection pre- assignment browsers.

SmartPlant Instrumentation creates and keeps track of wiring routing and connections by
identifying the wires and their connection points.

The wires and the items to which they are connected are arranged hierarchically as they appear in
the Domain Explorer.

The following sequence of operations is necessary for the creation of a wiring scheme:
Creation of panels, plug-and- socket boxes, terminal strips, wiring equipment, terminals,
and so on
Creation of cables, cable sets, and wires
Connecting wires to terminals.

In addition, tagged instruments may be wired so that their wiring routing is automatically tracked
and wire names are automatically propagated.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 127 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

11. APPENDIX

Instrument Index Commands

The following commands are used when working in the Instrument Index module

Icon Commands Explanation

Edit >Tag Numbers >New Tag Adds a new tag to the current domain
Number
Edit >Tag Numbers >Tag NumberProperties Edits the properties of a tag number thatyou select
in the Enter Tag Number dialog
box.
Edit >Tag Numbers >Duplicate Tag Duplicates a tag number that you select inthe
Numbers Enter Tag Number dialog box.
None Edit >Tag Numbers >Delete Tag Deletes a tag number that you select in theEnter
Numbers Tag Number dialog box.
None Edit >Tag Numbers >Move TagNumber Moves a tag number that you select in theEnter
Tag Number dialog box to another
<unit><area> or <plant>.

Edit >Loop Numbers >New LoopNumber Creates a new loop number.

Edit >Loop Numbers >Loop Number Edits the properties of a loop that you selectin the
Properties Enter Loop Number dialog box.
Edit >Loop Numbers >Duplicate Loop NumberCreates a new loop by duplicating
Number theproperties of an existing loop
None Edit >Loop Numbers >Delete LoopNumber Deletes a loop number that you enter in theEnter
Loop Number dialog box.
None Edit >Loop Numbers >Move LoopNumber Moves a loop number that you select in theEnter
Loop Number dialog box to another
<unit><area> or <plant>.
Edit >Loop Numbers >Rename Renames a loop number.
Multiple Loop Numbers
None Edit >Typical Loop Management Opens the Typical Loop Managementdialog box.
None Edit >Batch Loop Creation Opens the Batch Loop Creation dialogbox.
None Reports >All Tag Numbers Opens the Report Selection Optionsdialog box
for creating a tag summaryreport.
None Reports >Available Tag NumericSegments Opens the Available Tag NumericSegments
dialog box to create a report ofall the unused
numeric segments of tagnumbers in the current
<unit> or <plant>.
None Reports >Available Loop NumericSegments Opens the Available Loop NumericSegments
dialog box to create a report ofall the unused
numeric segments of loop
numbers in the current <unit> or <plant>.
None Reports >Loop Tag Numbers Creates a report of loop numbers and
theirassociated tags.
None Reports >Loop Summary Opens the Report Selection Optionsdialog box
for creating a loop summaryreport.
None Reports >Tables >Standard Creates an Instrument Type Report.
Instrument Type List
None Reports >Tables >Detailed Instrument Creates a Detailed Instrument List TypeReport.
Type List
None Reports >Tables >Instrument Creates an Instrument Status Report.

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 128 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

Statuses
None Reports >Tables >Equipment Type Creates an Equipment Type Report
None Reports >Tables >Equipment Creates an Equipment Report.
None Reports >Electrical Equipment Tables Creates an Associated Electrical
>Associated Electrical Equipment EquipmentReport.
None Reports >Electrical Equipment Tables Creates an Associated Electrical Equipmentand
>Associated Electrical Equipment &Types Types Report
None Reports >Telecom Devices Creates a Telecom Devices Report
None Reports >Telecom Tables Creates a Telecom Type Report.
>StandardTelecom Type List
None Reports >Telecom Tables >DetailedTelecom Creates a Telecom Type List Report.
Type List
None Reports >Telecom Tables >TelecomLine Creates a Telecom Line Numbers Report.
Numbers
None Reports >Telecom Tables >TelecomField Creates a Telecom Field Equipment Report
Equipment
None Reports >Telecom Tables >TelecomSignal Creates a Telecom Signal Levels Report
Levels
None Reports >Power Supply Tables >Rated Creates a Rated Voltage Report.
Voltage
None Reports >Power Supply Tables >Frequency Creates a Frequency Report.
None Reports >Power Supply Tables >Number of Creates a Number of Phases Report.
Phases
None Reports >Power Supply Tables >Operating Creates an Operating Modes Report.
Modes
Actions >Browse Index Opens an Instrument Index StandardBrowser
view.
Actions >Associate Opens the Associate Tag Number dialogbox to
associate a selected loop with tagnumbers.
None Tables >Telecom >Telecom DeviceTypes Opens the Telecom Device Types dialogbox. You
use this dialog box to create and
manage telecom device types.
None Tables >Telecom >Telecom LineNumbers Opens the Telecom Line Numbers dialogbox.
You use this dialog box to maintain the
contents of the Telecom line list when
creating a telecom field device.
None Tables >Telecom >Telecom FieldEquipment Opens the Telecom Field Equipmentdialog box.
You use this dialog box tomaintain the contents of
the FieldEquipment drop-down list in the Tag
Number Properties dialog box.
None Tables >Telecom >Telecom Signal Opens the Telecom Signal Levels dialogbox. You
Levels use this dialog box to maintain the
contents of the Signal Level drop- down list
in the Tag Number Properties dialog box.
None Tables >Power Supply >RatedVoltage Opens the Rated Voltage supporting table.This
shows the rated voltage values thatyou can use in
the Rated voltage list on thePower Supply tab of
the Tag Number
Properties dialog box.
None Tables >Power Supply >Frequency Opens the Frequency supporting table.This
shows the frequency values that youcan use in the
Frequency list on the PowerSupply tab of the
Tag Number Propertiesdialog box.
None Tables >Power Supply >Number of Opens the Number of Phases supporting
Phases table. This shows the number of phase
values that you can use in the Number of

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 129 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

phases list on the Power Supply tab of the

Tag Number Properties dialog box.
None Tables >Power Supply >Operating Opens the Operating Modes supportingtable.
Modes This shows the operating modevalues that you can
use in the Operatingmode list on the Power
Supply tab of theTag Number Properties dialog
box and theproperties dialog boxes of panels that
support power supply

Creating Panels using Browser Manager

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 130 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 131 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 132 of 133
 Procedure
SmartPlant Operation Procedure- Telecom

DOCUMENT NO.: REVISION NO.: REVISION DATE: APPROVED:

EKOL-SMO-X-XXXXX A 09-NOV-2010
Page 133 of 133