Scribd
Upload
32 views1 page

141 150t H Frame

H Frame Presses are large hydraulic presses that are 2.3 meters tall and can handle heavy pressing jobs horizontally or vertically. They have a rugged frame that can withstand the rated load across the full width. The press bed can be easily positioned using a winch and locked in place with retaining pins. Uprights allow for side entry of large bars or shafts. They are powered by an electric/hydraulic pump that allows for fast operation and remote control of the cylinder from all angles.

Uploaded by

jasscons
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views1 page

141 150t H Frame

H Frame Presses are large hydraulic presses that are 2.3 meters tall and can handle heavy pressing jobs horizontally or vertically. They have a rugged frame that can withstand the rated load across the full width. The press bed can be easily positioned using a winch and locked in place with retaining pins. Uprights allow for side entry of large bars or shafts. They are powered by an electric/hydraulic pump that allows for fast operation and remote control of the cylinder from all angles.

Uploaded by

jasscons
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

H Frame Presses

Standing 2,3 m tall, these giants handle the


really big jobs. May be used horizontally for
special pressing applications with user-
supplied supports.
Workhead has wide horizontal travel; rugged
press frame withstands load of rated
capacity across full width of frame. 150-200 Ton
Winch mechanism provides easy positioning Movable Presses
of press bed, locks in place for insertion of
retaining pins. Upper bolster can be lowered
279 mm for convenient positioning on
repetitive jobs.
Uprights are placed for easy side entry of
bars or shafts for straightening or bending.
Fast cylinder approach is provided by
PQ1204S "Quiet" electric/hydraulic pump.
Has remote control hand switch, enabling
SPE20013DS
operator to view work from all sides with

SHOP EQUIPMENT
fingertip control of cylinder piston travel.
PUMP ELECTRICAL SPECIFICATIONS
PQ120 Series 2,24 KW, 380 volt,
Hydraulic gauge and hydraulic fittings
are included with presses.
CE
50 cycle, three phase.

D
E H
J

G C Lower Bolster
B

DIMENSIONS
A B C D* E F G H J L M Floor Space
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2.286 1.803 1,118 279-991 228-1.111 279 1.270 318 381 105 457 1.117 x 1.803

*Lateral head movement

ORDERING INFORMATION
Capacity Type of Stroke Cylinder Order Speed (mm/min.) Type Valve Pump Prod. Wt.
(tons) Cylinder Used (mm) Model No. Advance Pressing Pump Type Model*** (kg)
150 Double-Acting 333 RD15013 SPE15013DS 610 99 Electric 4-way** PQ1204S-E380 1.366
200 Double-Acting 333 RD20013 SPE20013DS 457 74 Electric 4-way** PQ1204S-E380 1.484
Frame is shipped assembled.
Typical performance based on 7 bar and 700 bar pump specifications. Actual speeds may vary under operating conditions.
** Solenoid valve with 24 volt remote control hand switch.
*** Pump standard with press. Other Power Team pumps can be substituted. dBA at idle and 700 bar: 73/78, measured at 0,9 m foot distance, all sides.

PRESS ACCESSORIES
Page 144-145
www.powerteam.com 141

You might also like