Codes Description SIS Links

- Air Conditioning E11

- Air Conditioning System
- 7304 - CAB HEATER
E11 - 7309 - HEATER & AIR
CONDITIONER
- 7320 - AIR CONDITIONER
- 7566 - WIRING DIAGRAM
- AIR CONDITIONER GP
- Air Conditioning E12
- Air Conditioning System
- 7304 - CAB HEATER
E12 - 7309 - HEATER & AIR
CONDITIONER
- 7320 - AIR CONDITIONER
- 7566 - WIRING DIAGRAM
- AIR CONDITIONER GP
- Air Conditioning E13
- Air Conditioning System
- 7304 - CAB HEATER
E13 - 7309 - HEATER & AIR
CONDITIONER
- 7320 - AIR CONDITIONER
- 7566 - WIRING DIAGRAM
- AIR CONDITIONER GP
- Air Conditioning E14
- Air Conditioning System
- 7304 - CAB HEATER
E14 - 7309 - HEATER & AIR
CONDITIONER
- 7320 - AIR CONDITIONER
- 7566 - WIRING DIAGRAM
- AIR CONDITIONER GP
- Air Conditioning E15
- Air Conditioning System
- 7304 - CAB HEATER
E15 - 7309 - HEATER & AIR
CONDITIONER
- 7566 - WIRING DIAGRAM
- AIR CONDITIONER GP
- Air Conditioning E16
- Air Conditioning System
- 7304 - CAB HEATER
E16 - 7309 - HEATER & AIR
CONDITIONER
- 7566 - WIRING DIAGRAM
- AIR CONDITIONER GP
- Air Conditioning E21
E21
- Air Conditioning System
 - 7304 - CAB HEATER
- 7309 - HEATER & AIR
CONDITIONER
- 7566 - WIRING DIAGRAM
- AIR CONDITIONER GP
- Air Conditioning E22
- Air Conditioning System
- 7304 - CAB HEATER
E22 - 7309 - HEATER & AIR
CONDITIONER
- 7566 - WIRING DIAGRAM
- AIR CONDITIONER GP
- Air Conditioning E43
- Air Conditioning System
- 7304 - CAB HEATER
E43 - 7309 - HEATER & AIR
CONDITIONER
- 7320 - AIR CONDITIONER
- 7566 - WIRING DIAGRAM
- AIR CONDITIONER GP
- Air Conditioning E44
- Air Conditioning System
- 7304 - CAB HEATER
E44 - 7309 - HEATER & AIR
CONDITIONER
- 7320 - AIR CONDITIONER
- 7566 - WIRING DIAGRAM
- AIR CONDITIONER GP
- Troubleshooting Faults With
Service Codes
E51 - 7320 - AIR CONDITIONER
- 7566 - WIRING DIAGRAM
- AIR CONDITIONER GP

Component Based Troubleshooting is for technical reference only. It is not intended to replace the knowledge and skills of the
servicing technician, and does NOT imply warranty coverage.

Content Owner: Brian Hall

Caterpillar Confidential: Green
Copyright 2004 - 2011 Caterpillar Inc.
All Rights Reserved.
To view other code types click one of the links below.

Diagnostic Troubleshoot Code | Event | Flash

Description
Codes SIS Links
[Data Link] SPN, CID, or PID - FMI
- Cylinder #1 Injector : Erratic,
[CDL/ATA] Cylinder #1 Injector Intermittent, or Incorrect
1-2 - Injector Response - Test
- Data Erratic, Intermittent or Incorrect - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #1 Injector : Current
[CDL/ATA] Cylinder #1 Injector Below Normal
1-5 - Injector Solenoid - Test
- Current Below Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #1 Injector : Current
[CDL/ATA] Cylinder #1 Injector Above Normal
1-6 - Injector Solenoid - Test
- Current Above Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #1 Injector : Not
[CDL/ATA] Cylinder #1 Injector
Responding Properly
1-7 - Injector Response - Test
- Mechanical system not responding
- 1290 - UNIT INJECTOR
properly
- 7566 - WIRING DIAGRAM
- Cylinder #2 Injector : Erratic,
[CDL/ATA] Cylinder #2 Injector Intermittent, or Incorrect
2-2 - Injector Response - Test
- Data Erratic, Intermittent or Incorrect - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #2 Injector : Current
[CDL/ATA] Cylinder #2 Injector Below Normal
2-5 - Injector Solenoid - Test
- Current Below Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #2 Injector : Current
[CDL/ATA] Cylinder #2 Injector Above Normal
2-6 - Injector Solenoid - Test
- Current Above Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #2 Injector : Not
[CDL/ATA] Cylinder #2 Injector
Responding Properly
2-7 - Injector Response - Test
- Mechanical system not responding
- 1290 - UNIT INJECTOR
properly
- 7566 - WIRING DIAGRAM
- Cylinder #3 Injector : Erratic,
[CDL/ATA] Cylinder #3 Injector
Intermittent, or Incorrect
3-2
- Injector Response - Test
- Data Erratic, Intermittent or Incorrect
- 1290 - UNIT INJECTOR
 - 7566 - WIRING DIAGRAM
- Cylinder #3 Injector : Current
[CDL/ATA] Cylinder #3 Injector Below Normal
3-5 - Injector Solenoid - Test
- Current Below Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #3 Injector : Current
[CDL/ATA] Cylinder #3 Injector Above Normal
3-6 - Injector Solenoid - Test
- Current Above Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #3 Injector : Not
[CDL/ATA] Cylinder #3 Injector
Responding Properly
3-7 - Injector Response - Test
- Mechanical system not responding
- 1290 - UNIT INJECTOR
properly
- 7566 - WIRING DIAGRAM
- Cylinder #4 Injector : Erratic,
[CDL/ATA] Cylinder #4 Injector Intermittent, or Incorrect
4-2 - Injector Response - Test
- Data Erratic, Intermittent or Incorrect - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #4 Injector : Current
[CDL/ATA] Cylinder #4 Injector Below Normal
4-5 - Injector Solenoid - Test
- Current Below Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #4 Injector : Current
[CDL/ATA] Cylinder #4 Injector Above Normal
4-6 - Injector Solenoid - Test
- Current Above Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #4 Injector : Not
[CDL/ATA] Cylinder #4 Injector
Responding Properly
4-7 - Injector Response - Test
- Mechanical system not responding
- 1290 - UNIT INJECTOR
properly
- 7566 - WIRING DIAGRAM
- Cylinder #5 Injector : Erratic,
[CDL/ATA] Cylinder #5 Injector Intermittent, or Incorrect C6.4
5-2 - Injector Response - Test
- Data Erratic, Intermittent or Incorrect - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #5 Injector : Current
[CDL/ATA] Cylinder #5 Injector Below Normal C6.4
5-5 - Injector Solenoid - Test
- Current Below Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #5 Injector : Current
[CDL/ATA] Cylinder #5 Injector Above Normal C6.4
5-6 - Injector Solenoid - Test
- Current Above Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
 - Cylinder #5 Injector : Not
[CDL/ATA] Cylinder #5 Injector
Responding Properly C6.4
5-7 - Injector Response - Test
- Mechanical system not responding
- 1290 - UNIT INJECTOR
properly
- 7566 - WIRING DIAGRAM
- Cylinder #6 Injector : Erratic,
[CDL/ATA] Cylinder #6 Injector Intermittent, or Incorrect C6.4
6-2 - Injector Response - Test
- Data Erratic, Intermittent or Incorrect - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #6 Injector : Current
[CDL/ATA] Cylinder #6 Injector Below Normal C6.4
6-5 - Injector Solenoid - Test
- Current Below Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #6 Injector : Current
[CDL/ATA] Cylinder #6 Injector Above Normal C6.4
6-6 - Injector Solenoid - Test
- Current Above Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #6 Injector : Not
[CDL/ATA] Cylinder #6 Injector
Responding Properly C6.4
6-7 - Injector Response - Test
- Mechanical system not responding
- 1290 - UNIT INJECTOR
properly
- 7566 - WIRING DIAGRAM
- 8 Volt DC Supply : Voltage
[CDL] 8 Volt DC Supply Above Normal
- Sensor Supply - Test
41-3 [ATA] 8 Volt Supply - 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
- Voltage Above Normal TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
- 8 Volt DC Supply : Voltage
[CDL] 8 Volt DC Supply Below Normal
- Sensor Supply - Test
41-4 [ATA] 8 Volt Supply - 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
- Voltage Below Normal TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
- Throttle Position Sensor :
Abnormal Frequency, Pulse
[J1939] Accelerator Pedal Position 1
Width, or Period
- Speed Control (PWM) - Test
[CDL] Throttle Switch not released
- 1276 -
91-8 DECELERATOR/ACCELERATOR
[ATA] J1939 Throttle Position Signal
- 1913 - THROTTLE POSITION
SENSOR
- Abnormal Frequency, Pulse Width or
- 1915 - ENGINE SPEED
Period
CONTROL
- 7566 - WIRING DIAGRAM
[J1939] Engine Fuel Delivery Pressure - Fuel Delivery Pressure Sensor :
94-3
Voltage Above Normal
 [CDL] Fuel Delivery Pressure Sensor - Sensor Signal (Analog, Active) -
Test
[ATA] Fuel Pressure - 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
- Voltage Above Normal TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
- Fuel Delivery Pressure Sensor :
[J1939] Engine Fuel Delivery Pressure
Voltage Below Normal
- Sensor Signal (Analog, Active) -
[CDL] Fuel Delivery Pressure Sensor
Test
94-4
- 1439 - SENSOR (USE ONLY
[ATA] Fuel Pressure
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal
- 7566 - WIRING DIAGRAM
[J1939] Engine Fuel Delivery Pressure

[CDL] Fuel Delivery Pressure Sensor - High Fuel Pressure

- Fuel Pressure Is High
94-15
[ATA] Fuel Pressure - 1250 - FUEL SYSTEM
- 7566 - WIRING DIAGRAM
- Data Valid but above Normal Operating
Range (least severe)
[J1939] Engine Fuel Delivery Pressure

[CDL] Fuel Delivery Pressure Sensor - Low Fuel Pressure

- Fuel Pressure Is Low
94-17
[ATA] Fuel Pressure - 1250 - FUEL SYSTEM
- 7566 - WIRING DIAGRAM
- Data Valid But Below Normal Operating
Range (least severe)
[J1939] Engine Fuel Filter Differential
- Fuel Filter Differential Pressure
Pressure
Sensor : Voltage Above Normal
- Sensor Signal (Analog, Active) -
[CDL] Fuel Filter Differential Pressure
Test
95-3 Sensor
- 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
[ATA] Fuel Filter Restriction
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Engine Fuel Filter Differential
- Fuel Filter Differential Pressure
Pressure
Sensor : Voltage Below Normal
- Sensor Signal (Analog, Active) -
[CDL] Fuel Filter Differential Pressure
Test
95-4 Sensor
- 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
[ATA] Fuel Filter Restriction
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
- Voltage Below Normal
[J1939] Engine Fuel Filter Differential
- Fuel Filter Restriction
Pressure
- Fuel Filter Is Restricted
95-17
- 1261 - FUEL FILTER
[CDL] Fuel Filter Differential Pressure
- 7566 - WIRING DIAGRAM
Sensor
 [ATA] Fuel Filter Restriction

- Data Valid But Below Normal Operating

Range (least severe)
[J1939] Engine Fuel Filter Differential
Pressure

[CDL] Fuel Filter Differential Pressure - Fuel Filter Restriction

Sensor - Fuel Filter Is Restricted
95-18
- 1261 - FUEL FILTER
[ATA] Fuel Filter Restriction - 7566 - WIRING DIAGRAM

- Data Valid But Below Normal Operating

Range (moderate severity)
[J1939] Engine Oil Pressure

[CDL] Engine Oil Pressure Sensor - Low Engine Oil Pressure

- Oil Pressure Is Low
100-1
[ATA] Oil Pressure - 1348 - ENGINE OIL
- 7566 - WIRING DIAGRAM
- Data Valid But Below Normal Operating
Range (most severe)
- Engine Oil Pressure Sensor :
[J1939] Engine Oil Pressure
Voltage Above Normal
- Sensor Signal (Analog, Active) -
[CDL] Engine Oil Pressure Sensor
Test
100-3
- 1439 - SENSOR (USE ONLY
[ATA] Oil Pressure
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal
- 7566 - WIRING DIAGRAM
- Engine Oil Pressure Sensor :
[J1939] Engine Oil Pressure
Voltage Below Normal
- Sensor Signal (Analog, Active) -
[CDL] Engine Oil Pressure Sensor
Test
100-4
- 1439 - SENSOR (USE ONLY
[ATA] Oil Pressure
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal
- 7566 - WIRING DIAGRAM
[J1939] Engine Oil Pressure - Engine Oil Pressure Sensor :
Abnormal Rate of Change
[CDL] Engine Oil Pressure Sensor - Sensor Supply - Test
100-10 - 1439 - SENSOR (USE ONLY
[ATA] Oil Pressure FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Abnormal rate of change - 7566 - WIRING DIAGRAM
[J1939] Engine Oil Pressure
- Low Engine Oil Pressure
[CDL] Engine Oil Pressure Sensor - Oil Pressure Is Low
100-17
- 1348 - ENGINE OIL
[ATA] Oil Pressure - 7566 - WIRING DIAGRAM
 - Data Valid But Below Normal Operating
Range (least severe)
[J1939] Engine Intake Manifold #1 - Intake Manifold Pressure Sensor
Pressure : Voltage Above Normal
- Sensor Signal (Analog, Active) -
[CDL] Boost Pressure Sensor Test
102-3
- 1439 - SENSOR (USE ONLY
[ATA] Boost Pressure FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal - 7566 - WIRING DIAGRAM
[J1939] Engine Intake Manifold #1 - Intake Manifold Pressure Sensor
Pressure : Voltage Below Normal
- Sensor Signal (Analog, Active) -
[CDL] Boost Pressure Sensor Test
102-4
- 1439 - SENSOR (USE ONLY
[ATA] Boost Pressure FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal - 7566 - WIRING DIAGRAM
[J1939] Engine Intake Manifold #1 - Intake Manifold Pressure Sensor
Pressure : Abnormal Rate of Change
- Sensor Signal (Analog, Active) -
[CDL] Boost Pressure Sensor Test
102-10
- 1439 - SENSOR (USE ONLY
[ATA] Boost Pressure FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Abnormal rate of change - 7566 - WIRING DIAGRAM
[J1939] Engine Intake Manifold #1
Pressure
- High Intake Manifold Pressure
[CDL] Boost Pressure Sensor - Intake Manifold Air Pressure Is
102-16 High
[ATA] Boost Pressure - 1058 - INLET MANIFOLD
- 7566 - WIRING DIAGRAM
- Data Valid but above Normal Operating
Range (moderate severity)
[J1939] Engine Intake Manifold #1
Pressure
- Low Intake Manifold Pressure
[CDL] Boost Pressure Sensor - Intake Manifold Air Pressure Is
102-18 Low
[ATA] Boost Pressure - 1058 - INLET MANIFOLD
- 7566 - WIRING DIAGRAM
- Data Valid But Below Normal Operating
Range (moderate severity)
[J1939] Engine Intake Manifold #1 - Intake Manifold Air Temperature
Temperature Sensor : Voltage Above Normal
- Sensor Signal (Analog, Passive)
[CDL] Inlet Manifold Temperature Sensor - Test
105-3
- 1439 - SENSOR (USE ONLY
[ATA] Intake Manifold Air Temperature FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal - 7566 - WIRING DIAGRAM
 [J1939] Engine Intake Manifold #1 - Intake Manifold Air Temperature
Temperature Sensor : Voltage Below Normal
- Sensor Signal (Analog, Passive)
[CDL] Inlet Manifold Temperature Sensor - Test
105-4
- 1439 - SENSOR (USE ONLY
[ATA] Intake Manifold Air Temperature FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal - 7566 - WIRING DIAGRAM
[J1939] Engine Intake Manifold #1
Temperature
- High Intake Manifold Air
Temperature
[CDL] Inlet Manifold Temperature Sensor
- Intake Manifold Air Temperature
105-15
Is High
[ATA] Intake Manifold Air Temperature
- 1058 - INLET MANIFOLD
- 7566 - WIRING DIAGRAM
- Data Valid but above Normal Operating
Range (least severe)
[J1939] Engine Intake Manifold #1
Temperature
- High Intake Manifold Air
Temperature
[CDL] Inlet Manifold Temperature Sensor
- Intake Manifold Air Temperature
105-16
Is High
[ATA] Intake Manifold Air Temperature
- 1058 - INLET MANIFOLD
- 7566 - WIRING DIAGRAM
- Data Valid but above Normal Operating
Range (moderate severity)
- Engine Coolant Temperature
[J1939] Engine Coolant Temperature
Sensor : Voltage Above Normal
- Sensor Signal (Analog, Passive)
[CDL] Engine Coolant Temperature Sensor
- Test
110-3
- 1439 - SENSOR (USE ONLY
[ATA] Coolant Temperature
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal
- 7566 - WIRING DIAGRAM
- Engine Coolant Temperature
[J1939] Engine Coolant Temperature
Sensor : Voltage Below Normal
- Sensor Signal (Analog, Passive)
[CDL] Engine Coolant Temperature Sensor
- Test
110-4
- 1439 - SENSOR (USE ONLY
[ATA] Coolant Temperature
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal
- 7566 - WIRING DIAGRAM
[J1939] Engine Coolant Temperature
- High Engine Coolant
[CDL] Engine Coolant Temperature Sensor
Temperature
110-15 - Coolant Temperature Is High
[ATA] Coolant Temperature
- 1395 - ENGINE COOLANT
- 7566 - WIRING DIAGRAM
- Data Valid but above Normal Operating
Range (least severe)
[J1939] Engine Coolant Temperature - High Engine Coolant
110-16 Temperature
[CDL] Engine Coolant Temperature Sensor - Coolant Temperature Is High
 - 1395 - ENGINE COOLANT
[ATA] Coolant Temperature - 7566 - WIRING DIAGRAM

- Data Valid but above Normal Operating

Range (moderate severity)
[J1939] Engine Injector Metering Rail #1 - Fuel Rail Pressure Sensor :
Pressure Voltage Above Normal
- Sensor Signal (Analog, Active) -
[CDL] Left Reverse EDC Solenoid Test
157-3
- 1439 - SENSOR (USE ONLY
[ATA] Fuel Rail Pressure FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal - 7566 - WIRING DIAGRAM
[J1939] Engine Injector Metering Rail #1 - Fuel Rail Pressure Sensor :
Pressure Voltage Below Normal
- Sensor Signal (Analog, Active) -
[CDL] Left Reverse EDC Solenoid Test
157-4
- 1439 - SENSOR (USE ONLY
[ATA] Fuel Rail Pressure FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal - 7566 - WIRING DIAGRAM
[J1939] Engine Injector Metering Rail #1
Pressure
- High Fuel Rail Pressure
[CDL] Left Reverse EDC Solenoid
- Fuel Rail Pressure Is High
157-16
- 1252 - FUEL INJECTION LINES
[ATA] Fuel Rail Pressure
- 7566 - WIRING DIAGRAM
- Data Valid but above Normal Operating
Range (moderate severity)
[J1939] Engine Injector Metering Rail #1
Pressure
- Low Fuel Rail Pressure
[CDL] Left Reverse EDC Solenoid
- Fuel Rail Pressure Is Low
157-18
- 1252 - FUEL INJECTION LINES
[ATA] Fuel Rail Pressure
- 7566 - WIRING DIAGRAM
- Data Valid But Below Normal Operating
Range (moderate severity)
[J1939] Keyswitch Battery Potential
- Ignition Key Switch loss of signal
- Electrical Power Supply - Test
158-2 [CDL] Right Forward EDC Solenoid
- 1401 - BATTERY
- 7566 - WIRING DIAGRAM
- Data Erratic, Intermittent or Incorrect
[J1939] Battery Potential

[CDL] Electrical System Voltage - Electrical System Voltage : High

- Electrical Power Supply - Test
168-00
[ATA] ECM Battery Power - 1401 - BATTERY
- 7566 - WIRING DIAGRAM
- Data Valid but Above Normal Operating
Range (most severe)
168-1 [J1939] Battery Potential - Electrical System Voltage : Low
 - Electrical Power Supply - Test
[CDL] Electrical System Voltage - 1401 - BATTERY
- 7566 - WIRING DIAGRAM
[ATA] ECM Battery Power

- Data Valid But Below Normal Operating

Range (most severe)
[J1939] Battery Potential
- Electrical System Voltage :
[CDL] Electrical System Voltage Erratic, Intermittent, or Incorrect
168-2 - Electrical Power Supply - Test
[ATA] ECM Battery Power - 1401 - BATTERY
- 7566 - WIRING DIAGRAM
- Data Erratic, Intermittent or Incorrect
[J1939] Engine Air Inlet Temperature - Intake Manifold Air Temperature
Sensor : Voltage Above Normal
[CDL] Intake Manifold Air Temperature - Sensor Signal (Analog, Passive)
Sensor - Test
172-3
- 1439 - SENSOR (USE ONLY
[ATA] Air Inlet Temp FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal - 7566 - WIRING DIAGRAM
[J1939] Engine Air Inlet Temperature - Intake Manifold Air Temperature
Sensor : Voltage Below Normal
[CDL] Intake Manifold Air Temperature - Sensor Signal (Analog, Passive)
Sensor - Test
172-4
- 1439 - SENSOR (USE ONLY
[ATA] Air Inlet Temp FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal - 7566 - WIRING DIAGRAM
- Fuel Temperature Sensor :
[J1939] Engine Fuel Temperature 1
Voltage Above Normal
- Sensor Signal (Analog, Passive)
[CDL] Fuel Temperature Sensor
- Test
174-3
- 1439 - SENSOR (USE ONLY
[ATA] Fuel Temperature
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal
- 7566 - WIRING DIAGRAM
- Fuel Temperature Sensor :
[J1939] Engine Fuel Temperature 1
Voltage Below Normal
- Sensor Signal (Analog, Passive)
[CDL] Fuel Temperature Sensor
- Test
174-4
- 1439 - SENSOR (USE ONLY
[ATA] Fuel Temperature
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal
- 7566 - WIRING DIAGRAM
[J1939] Engine Fuel Temperature 1
- High Fuel Supply Temperature
[CDL] Fuel Temperature Sensor - Fuel Temperature Is High
174-15
- 1250 - FUEL SYSTEM
[ATA] Fuel Temperature - 7566 - WIRING DIAGRAM
 - Data Valid but above Normal Operating
Range (least severe)
[J1939] Engine Fuel Temperature 1

[CDL] Fuel Temperature Sensor - High Fuel Supply Temperature

- Fuel Temperature Is High
174-16
[ATA] Fuel Temperature - 1250 - FUEL SYSTEM
- 7566 - WIRING DIAGRAM
- Data Valid but above Normal Operating
Range (moderate severity)
[J1939] Engine Speed
- Engine Speed Sensor :
Abnormal Frequency, Pulse
[CDL] Engine Speed Sensor
Width, or Period
190-8 - Speed/Timing - Test
[ATA] Primary Engine Speed
- 1912 - ENGINE SPEED/TIMING
SENSOR
- Abnormal Frequency, Pulse Width or
- 7566 - WIRING DIAGRAM
Period
[J1939] Engine Speed
- Engine Overspeed
[CDL] Engine Speed Sensor
- Engine Overspeeds
190-15 - 1915 - ENGINE SPEED
[ATA] Primary Engine Speed
CONTROL
- 7566 - WIRING DIAGRAM
- Data Valid but above Normal Operating
Range (least severe)
- Personality Module : Erratic,
[CDL] Personality Module
Intermittent, or Incorrect
- ECM Software - Install
[ATA] Check Customer or System
253-2 - 1901 - ENGINE ELECTRONIC
Parameters
CONTROL MODULE
- 7620 - SOFTWARE
- Data Erratic, Intermittent or Incorrect
- 7566 - WIRING DIAGRAM
- Engine Timing Offset fault
[CDL/ATA] Engine Timing Calibration - Fuel Injection Timing - Check
261-11 - Fuel Injection Pump - Install
- Failure Mode Not Identifiable - 1251 - FUEL INJECTION PUMP
- 7566 - WIRING DIAGRAM
- 5 Volt Sensor DC Power Supply
: Voltage Above Normal
[CDL/ATA] 5 Volt Sensor DC Power Supply - Sensor Supply - Test
262-3 - 1439 - SENSOR (USE ONLY
- Voltage Above Normal FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
- 5 Volt Sensor DC Power Supply
: Voltage Below Normal
[CDL/ATA] 5 Volt Sensor DC Power Supply - Sensor Supply - Test
262-4 - 1439 - SENSOR (USE ONLY
- Voltage Below Normal FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
 - Programmed Parameter Fault :
Erratic, Intermittent, or Incorrect
[CDL/ATA] Programmed Parameter Fault
- Configuration Parameters
268-2
- 1900 - ENGINE ELECTRONIC
- Data Erratic, Intermittent or Incorrect
CONTROL SYSTEM
- 7566 - WIRING DIAGRAM
[CDL] Secondary Engine Speed Sensor - Secondary Engine Speed
Sensor : Abnormal Frequency,
[ATA] Aftertreatment Atomization Air Pulse Width, or Period
342-8 Solenoid - Speed/Timing - Test
- 1912 - ENGINE SPEED/TIMING
- Abnormal Frequency, Pulse Width or SENSOR
Period - 7566 - WIRING DIAGRAM
- Fuel Pressure Sensor - After
Fuel Filter : Voltage Above Normal
[CDL] Fuel Pressure Sensor - After Fuel - Sensor Signal (Analog, Active) -
Filter Test
460-3
- 1439 - SENSOR (USE ONLY
- Voltage Above Normal FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
- Fuel Pressure Sensor - After
Fuel Filter : Voltage Below Normal
[CDL] Fuel Pressure Sensor - After Fuel - Sensor Signal (Analog, Active) -
Filter Test
460-4
- 1439 - SENSOR (USE ONLY
- Voltage Below Normal FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
- Fuel Pressure Sensor - After
Fuel Filter : Abnormal Rate of
[CDL] Fuel Pressure Sensor - After Fuel Change
Filter - Sensor Supply - Test
460-10
- 1439 - SENSOR (USE ONLY
- Abnormal rate of change FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
- Inlet Air Heater Relay : Current
[J1939] Parking Brake On Actuator Below Normal
- Starting Aid - Test
617-5 [CDL/ATA] Inlet Air Heater Relay - 1090 - AIR INLET HEATER
- 1412 - GLOW PLUG
- Current Below Normal - 1456 - ETHER STARTING AID
- 7566 - WIRING DIAGRAM
- Inlet Air Heater Relay : Current
[J1939] Parking Brake On Actuator Above Normal
- Starting Aid - Test
617-6 [CDL/ATA] Inlet Air Heater Relay - 1090 - AIR INLET HEATER
- 1412 - GLOW PLUG
- Current Above Normal - 1456 - ETHER STARTING AID
- 7566 - WIRING DIAGRAM
[J1939] Calibration Memory - Programmed Parameter Fault :
630-2
Erratic, Intermittent, or Incorrect
 - Data Erratic, Intermittent or Incorrect - Configuration Parameters
- 1900 - ENGINE ELECTRONIC
CONTROL SYSTEM
- 7566 - WIRING DIAGRAM
- Personality Module : Erratic,
[J1939] Calibration Module Intermittent, or Incorrect
- ECM Software - Install
631-2 [CDL] Transmission Clutch 1 Solenoid - 1901 - ENGINE ELECTRONIC
CONTROL MODULE
- Data Erratic, Intermittent or Incorrect - 7620 - SOFTWARE
- 7566 - WIRING DIAGRAM
[J1939] Engine Timing Sensor - Engine Timing Offset fault
- Fuel Injection Timing - Check
637-11 [CDL] Backup Alarm - Fuel Injection Pump - Install
- 1251 - FUEL INJECTION PUMP
- Failure Mode Not Identifiable - 7566 - WIRING DIAGRAM
- Cylinder #1 Injector : Erratic,
[J1939] Engine Injector Cylinder #01 Intermittent, or Incorrect
651-2 - Injector Response - Test
- Data Erratic, Intermittent or Incorrect - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #1 Injector : Current
[J1939] Engine Injector Cylinder #01 Below Normal
651-5 - Injector Solenoid - Test
- Current Below Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #1 Injector : Current
[J1939] Engine Injector Cylinder #01 Above Normal
651-6 - Injector Solenoid - Test
- Current Above Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #1 Injector : Not
[J1939] Engine Injector Cylinder #01
Responding Properly
651-7 - Injector Response - Test
- Mechanical system not responding
- 1290 - UNIT INJECTOR
properly
- 7566 - WIRING DIAGRAM
- Cylinder #2 Injector : Erratic,
[J1939] Engine Injector Cylinder #02 Intermittent, or Incorrect
652-2 - Injector Response - Test
- Data Erratic, Intermittent or Incorrect - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #2 Injector : Current
[J1939] Engine Injector Cylinder #02 Below Normal
652-5 - Injector Solenoid - Test
- Current Below Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #2 Injector : Current
[J1939] Engine Injector Cylinder #02 Above Normal
652-6 - Injector Solenoid - Test
- Current Above Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
 - Cylinder #2 Injector : Not
[J1939] Engine Injector Cylinder #02
Responding Properly
652-7 - Injector Response - Test
- Mechanical system not responding
- 1290 - UNIT INJECTOR
properly
- 7566 - WIRING DIAGRAM
- Cylinder #3 Injector : Erratic,
[J1939] Engine Injector Cylinder #03 Intermittent, or Incorrect
653-2 - Injector Response - Test
- Data Erratic, Intermittent or Incorrect - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #3 Injector : Current
[J1939] Engine Injector Cylinder #03 Below Normal
653-5 - Injector Solenoid - Test
- Current Below Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #3 Injector : Current
[J1939] Engine Injector Cylinder #03 Above Normal
653-6 - Injector Solenoid - Test
- Current Above Normal - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Cylinder #3 Injector : Not
[J1939] Engine Injector Cylinder #03
Responding Properly
653-7 - Injector Response - Test
- Mechanical system not responding
- 1290 - UNIT INJECTOR
properly
- 7566 - WIRING DIAGRAM
[J1939] Engine Injector Cylinder #04
- Cylinder #4 Injector : Erratic,
Intermittent, or Incorrect
[CDL] Trailer Right Brake Oil Temperature
654-2 - Injector Response - Test
Sensor
- 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Data Erratic, Intermittent or Incorrect
[J1939] Engine Injector Cylinder #04
- Cylinder #4 Injector : Current
Below Normal
[CDL] Trailer Right Brake Oil Temperature
654-5 - Injector Solenoid - Test
Sensor
- 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Engine Injector Cylinder #04
- Cylinder #4 Injector : Current
Above Normal
[CDL] Trailer Right Brake Oil Temperature
654-6 - Injector Solenoid - Test
Sensor
- 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Current Above Normal
[J1939] Engine Injector Cylinder #04
- Cylinder #4 Injector : Not
[CDL] Trailer Right Brake Oil Temperature Responding Properly
654-7 Sensor - Injector Response - Test
- 1290 - UNIT INJECTOR
- Mechanical system not responding - 7566 - WIRING DIAGRAM
properly
[J1939] Engine Injector Cylinder #05 - Cylinder #5 Injector : Erratic,
655-2
Intermittent, or Incorrect C6.4
 [CDL] Trailer Left Brake Oil Temperature - Injector Response - Test
Sensor - 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Data Erratic, Intermittent or Incorrect
[J1939] Engine Injector Cylinder #05
- Cylinder #5 Injector : Current
Below Normal C6.4
[CDL] Trailer Left Brake Oil Temperature
655-5 - Injector Solenoid - Test
Sensor
- 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Engine Injector Cylinder #05
- Cylinder #5 Injector : Current
Above Normal C6.4
[CDL] Trailer Left Brake Oil Temperature
655-6 - Injector Solenoid - Test
Sensor
- 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Current Above Normal
[J1939] Engine Injector Cylinder #05
- Cylinder #5 Injector : Not
[CDL] Trailer Left Brake Oil Temperature Responding Properly C6.4
655-7 Sensor - Injector Response - Test
- 1290 - UNIT INJECTOR
- Mechanical system not responding - 7566 - WIRING DIAGRAM
properly
[J1939] Engine Injector Cylinder #06
- Cylinder #6 Injector : Erratic,
Intermittent, or Incorrect C6.4
[CDL] Trailer Brake Cooler Inlet
656-2 - Injector Response - Test
Temperature Sensor
- 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Data Erratic, Intermittent or Incorrect
[J1939] Engine Injector Cylinder #06
- Cylinder #6 Injector : Current
Below Normal C6.4
[CDL] Trailer Brake Cooler Inlet
656-5 - Injector Solenoid - Test
Temperature Sensor
- 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Engine Injector Cylinder #06
- Cylinder #6 Injector : Current
Above Normal C6.4
[CDL] Trailer Brake Cooler Inlet
656-6 - Injector Solenoid - Test
Temperature Sensor
- 1290 - UNIT INJECTOR
- 7566 - WIRING DIAGRAM
- Current Above Normal
[J1939] Engine Injector Cylinder #06
- Cylinder #6 Injector : Not
[CDL] Trailer Brake Cooler Inlet Responding Properly C6.4
656-7 Temperature Sensor - Injector Response - Test
- 1290 - UNIT INJECTOR
- Mechanical system not responding - 7566 - WIRING DIAGRAM
properly
[J1939] ECU 8 Volts DC Supply
- 8 Volt DC Supply : Voltage
678-3 Above Normal
[CDL] Torque Converter Impeller Clutch
- Sensor Supply - Test
Solenoid
 - 1439 - SENSOR (USE ONLY
- Voltage Above Normal FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
- 8 Volt DC Supply : Voltage
[J1939] ECU 8 Volts DC Supply
Below Normal
- Sensor Supply - Test
[CDL] Torque Converter Impeller Clutch
678-4 - 1439 - SENSOR (USE ONLY
Solenoid
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal
- 7566 - WIRING DIAGRAM
- Secondary Engine Speed
Sensor : Abnormal Frequency,
[J1939] Engine Speed Sensor #2
Pulse Width, or Period
723-8 - Speed/Timing - Test
- Abnormal Frequency, Pulse Width or
- 1912 - ENGINE SPEED/TIMING
Period
SENSOR
- 7566 - WIRING DIAGRAM
- Inlet Air Heater Relay : Current
[J1939] Engine Inlet Air Heater Driver #1 Below Normal
- Starting Aid - Test
729-5 [CDL] Auto - 1090 - AIR INLET HEATER
- 1412 - GLOW PLUG
- Current Below Normal - 1456 - ETHER STARTING AID
- 7566 - WIRING DIAGRAM
- Inlet Air Heater Relay : Current
[J1939] Engine Inlet Air Heater Driver #1 Above Normal
- Starting Aid - Test
729-6 [CDL] Auto - 1090 - AIR INLET HEATER
- 1412 - GLOW PLUG
- Current Above Normal - 1456 - ETHER STARTING AID
- 7566 - WIRING DIAGRAM
- 5 Volt Sensor DC Power Supply
[J1939] Sensor Supply Voltage 1
: Voltage Above Normal
- Sensor Supply - Test
[CDL] Blade Control Handle Tilt Position
1079-3 - 1439 - SENSOR (USE ONLY
Sensor
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal
- 7566 - WIRING DIAGRAM
- 5 Volt Sensor DC Power Supply
[J1939] Sensor Supply Voltage 1
: Voltage Below Normal
- Sensor Supply - Test
[CDL] Blade Control Handle Tilt Position
1079-4 - 1439 - SENSOR (USE ONLY
Sensor
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal
- 7566 - WIRING DIAGRAM
- Machine Security System
[J1939] Anti-theft Component Status States Module : Erratic, Intermittent, or
Incorrect
1196-2 [CDL] Fan Return Filter Bypass Switch - CAN Data Link - Test
- 1900 - ENGINE ELECTRONIC
- Data Erratic, Intermittent or Incorrect CONTROL SYSTEM
- 7566 - WIRING DIAGRAM
 [J1939] Engine Fuel Pump Pressurizing
Assembly #1 - Fuel Rail #1 Pressure Valve
Solenoid : Current Below Normal
1347-5 [CDL] DLO Engine Cooler In Temp Sens - Fuel Rail Pump - Test
open - 1251 - FUEL INJECTION PUMP
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Engine Fuel Pump Pressurizing
Assembly #1 - Fuel Rail #1 Pressure Valve
Solenoid : Current Above Normal
1347-6 [CDL] DLO Engine Cooler In Temp Sens - Fuel Rail Pump - Test
open - 1251 - FUEL INJECTION PUMP
- 7566 - WIRING DIAGRAM
- Current Above Normal
- Machine Security System
[J1939] Fan Speed
Module : Erratic, Intermittent, or
Incorrect
[CDL/ATA] Machine Security System
1639-2 - CAN Data Link - Test
Module
- 1900 - ENGINE ELECTRONIC
CONTROL SYSTEM
- Data Erratic, Intermittent or Incorrect
- 7566 - WIRING DIAGRAM
[J1939] High Limit Threshhold for Minimum
Continuous Torque from Retarder
- Fuel Rail #1 Pressure Valve
[CDL] Fuel Rail #1 Pressure Valve Solenoid : Current Below Normal
1779-5 Solenoid - Fuel Rail Pump - Test
- 1251 - FUEL INJECTION PUMP
[ATA] Fuel Rail Pressure Valve Solenoid - 7566 - WIRING DIAGRAM

- Current Below Normal

[J1939] High Limit Threshhold for Minimum
Continuous Torque from Retarder
- Fuel Rail #1 Pressure Valve
[CDL] Fuel Rail #1 Pressure Valve Solenoid : Current Above Normal
1779-6 Solenoid - Fuel Rail Pump - Test
- 1251 - FUEL INJECTION PUMP
[ATA] Fuel Rail Pressure Valve Solenoid - 7566 - WIRING DIAGRAM

- Current Above Normal

- Intake Manifold Pressure Sensor
[J1939] Engine Speed Limit Request -
: Voltage Above Normal
Maximum Continuous
- Sensor Signal (Analog, Active) -
Test
1785-3 [CDL/ATA] Intake Manifold Pressure
- 1439 - SENSOR (USE ONLY
Sensor
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal
- 7566 - WIRING DIAGRAM
[J1939] Engine Speed Limit Request -
Maximum Continuous - Intake Manifold Pressure Sensor
: Voltage Below Normal
1785-4
[CDL/ATA] Intake Manifold Pressure - Sensor Signal (Analog, Active) -
Sensor Test
 - Voltage Below Normal - 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
- Intake Manifold Pressure Sensor
[J1939] Engine Speed Limit Request -
: Abnormal Rate of Change
Maximum Continuous
- Sensor Signal (Analog, Active) -
Test
1785-10 [CDL/ATA] Intake Manifold Pressure
- 1439 - SENSOR (USE ONLY
Sensor
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Abnormal rate of change
- 7566 - WIRING DIAGRAM
- Fuel Rail Pressure Sensor :
Voltage Above Normal
[J1939] ACC System Shutoff Warning
- Sensor Signal (Analog, Active) -
Test
1797-3 [CDL/ATA] Fuel Rail Pressure Sensor
- 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
- Voltage Above Normal
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
- Fuel Rail Pressure Sensor :
Voltage Below Normal
[J1939] ACC System Shutoff Warning
- Sensor Signal (Analog, Active) -
Test
1797-4 [CDL/ATA] Fuel Rail Pressure Sensor
- 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
- Voltage Below Normal
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
[J1939] Engine Total Average Fuel Rate
- Ignition Key Switch loss of signal
- Electrical Power Supply - Test
1834-2 [CDL/ATA] Ignition Key Switch
- 1401 - BATTERY
- 7566 - WIRING DIAGRAM
- Data Erratic, Intermittent or Incorrect
- Air Inlet Heater : Voltage Above
Normal
Air Inlet Heater - Starting Aid - Test
3257-3 - 1090 - AIR INLET HEATER
- Voltage Above Normal - 1412 - GLOW PLUG
- 1456 - ETHER STARTING AID
- 7566 - WIRING DIAGRAM
- Air Inlet Heater : Voltage Below
Normal
Air Inlet Heater - Starting Aid - Test
3257-4 - 1090 - AIR INLET HEATER
- Voltage Below Normal - 1412 - GLOW PLUG
- 1456 - ETHER STARTING AID
- 7566 - WIRING DIAGRAM

Component Based Troubleshooting is for technical reference only. It is not intended to replace the knowledge and skills of the
servicing technician, and does NOT imply warranty coverage.

Content Owner: Brian Hall

Caterpillar Confidential: Green
Copyright 2004 - 2011 Caterpillar Inc.
All Rights Reserved.

To view other code types click one of the links below.

Diagnostic Troubleshoot Code | Event

Description
Codes SIS Links
[Data Link] SPN, CID, or PID - FMI
- MID 039 - CID 0041 - FMI 06
[CDL] 8 Volt DC Supply - Electronic Control Module
(ECM) - Replace
41-6 [ATA] 8 Volt Supply - 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
- Current Above Normal TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
[J1939] Fuel Level
- MID 039 - CID 0096 - FMI 04
[CDL] Fuel Level Sensor - Electronic Control Module
96-4 (ECM) - Replace
[ATA] Fuel Level - 1273 - FUEL TANK
- 7566 - WIRING DIAGRAM
- Voltage Below Normal
[J1939] Fuel Level
- MID 039 - CID 0096 - FMI 05
[CDL] Fuel Level Sensor - Electronic Control Module
96-5 (ECM) - Replace
[ATA] Fuel Level - 1273 - FUEL TANK
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Engine Coolant Temperature - MID 039 - CID 0110 - FMI 04
- Electronic Control Module
[CDL] Engine Coolant Temperature Sensor (ECM) - Replace
110-4 - System Schematic
[ATA] Coolant Temperature - 1906 - WATER
TEMPERATURE SENSOR
- Voltage Below Normal - 7566 - WIRING DIAGRAM
- MID 039 - CID 0110 - FMI 09
[J1939] Engine Coolant Temperature
- Electronic Control Module
(ECM) - Replace
[CDL] Engine Coolant Temperature Sensor
- Electronic Control Module
110-9
(ECM) - Flash Program
[ATA] Coolant Temperature
- 1906 - WATER
TEMPERATURE SENSOR
- Abnormal Update Rate
- 7566 - WIRING DIAGRAM
[J1939] Charging System Potential - MID 039 - CID 0167 - FMI 12
167-12 - Electronic Control Module
[CDL] Alternator Charging Voltage Sensor (ECM) - Replace
 - Electronic Control Module
- Bad Device or Component (ECM) - Flash Program
- 1406 - CHARGING SYSTEM
- 7566 - WIRING DIAGRAM
[J1939] Battery Potential
- MID 039 - CID 0168 - FMI 05
[CDL] Electrical System Voltage - Electronic Control Module
168-5 (ECM) - Replace
[ATA] ECM Battery Power - 1406 - CHARGING SYSTEM
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Ambient Air Temperature
- MID 039 - CID 0171 - FMI 03
[CDL] Ambient Air Temperature Sensor - Electronic Control Module
(ECM) - Replace
171-3
[ATA] Loss of Ambient Air Temperature - 1928 - ATMOSPHERIC
Data TEMPERATURE SENSOR
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Ambient Air Temperature
- MID 039 - CID 0171 - FMI 04
[CDL] Ambient Air Temperature Sensor - Electronic Control Module
(ECM) - Replace
171-4
[ATA] Loss of Ambient Air Temperature - 1928 - ATMOSPHERIC
Data TEMPERATURE SENSOR
- 7566 - WIRING DIAGRAM
- Voltage Below Normal
[J1939] Engine Speed
- MID 039 - CID 0190 - FMI 08
[CDL] Engine Speed Sensor - Electronic Control Module
(ECM) - Replace
190-8
[ATA] Primary Engine Speed - 1907 - ENGINE SPEED
SENSOR
- Abnormal Frequency, Pulse Width or - 7566 - WIRING DIAGRAM
Period
[J1939] Total Vehicle Hours
- MID 039 - CID 0246 - FMI 12
- Electronic Control Module
[CDL] Proprietary CAN Data Link
(ECM) - Replace
246-12
- 7610 - PROGRAMMABLE
[ATA] Brake Pedal Switch #1
CONTROL
- 7566 - WIRING DIAGRAM
- Bad Device or Component
[J1939] Engine Total Hours of Operation
- MID 039 - CID 0247 - FMI 12
[CDL] SAE J1939 Data Link
- 7610 - PROGRAMMABLE
247-12
CONTROL
[ATA] Brake Pedal Switch #2
- 7566 - WIRING DIAGRAM
- Bad Device or Component
[J1939] Total Power Takeoff Hours
- MID 039 - CID 0248 - FMI 12
248-12 - Electronic Control Module
[CDL/ATA] CAT Data Link
(ECM) - Replace
 - Bad Device or Component - 7610 - PROGRAMMABLE
CONTROL
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0254 - FMI 12
[CDL] Electronic Control Module
- Electronic Control Module
(ECM) - Replace
254-12 [ATA] ECM Fault
- 7610 - PROGRAMMABLE
CONTROL
- Bad Device or Component
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0262 - FMI 06
- Electronic Control Module
[CDL/ATA] 5 Volt Sensor DC Power Supply (ECM) - Replace
262-6 - 1439 - SENSOR (USE ONLY
- Current Above Normal FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0271 - FMI 06
[CDL] Action Alarm
- System Schematic
271-6
- 7407 - ACTION ALARM
- Current Above Normal
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0291 - FMI 03
[CDL] Engine Cooling Fan Solenoid - Wiring Harness (Short Circuit) -
Test
291-3 [ATA] Fuel Rail Pump #2 Output - Electronic Control Module
(ECM) - Replace
- Voltage Above Normal - 1359 - FAN DRIVE
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0291 - FMI 05
[CDL] Engine Cooling Fan Solenoid - Wiring Harness (Open Circuit) -
Test
291-5 [ATA] Fuel Rail Pump #2 Output - Electronic Control Module
(ECM) - Replace
- Current Below Normal - 1359 - FAN DRIVE
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0291 - FMI 06
[CDL] Engine Cooling Fan Solenoid - Wiring Harness (Short Circuit) -
Test
291-6 [ATA] Fuel Rail Pump #2 Output - Electronic Control Module
(ECM) - Replace
- Current Above Normal - 1359 - FAN DRIVE
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0362 - FMI 03
[CDL] Engine Fan Speed Control Solenoid
- Electronic Control Module
(ECM) - Replace
362-3 [ATA] Cylinder #1 Injector Actuator #2
- 1359 - FAN DRIVE
- 5479 - SOLENOID VALVE
- Voltage Above Normal
- 7566 - WIRING DIAGRAM
[CDL] Engine Fan Speed Control Solenoid - MID 039 - CID 0362 - FMI 05
- Electronic Control Module
362-5 [ATA] Cylinder #1 Injector Actuator #2 (ECM) - Replace
- 1359 - FAN DRIVE
- Current Below Normal - 5479 - SOLENOID VALVE
 - 7566 - WIRING DIAGRAM
- MID 039 - CID 0362 - FMI 06
[CDL] Engine Fan Speed Control Solenoid
- Electronic Control Module
(ECM) - Replace
362-6 [ATA] Cylinder #1 Injector Actuator #2
- 1359 - FAN DRIVE
- 5479 - SOLENOID VALVE
- Current Above Normal
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0374 - FMI 03
- Electronic Control Module
[CDL] Swing Brake Solenoid (ECM) - Replace
374-3 - 5059 - PILOT CONTROL
- Voltage Above Normal VALVE
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0374 - FMI 05
- Electronic Control Module
[CDL] Swing Brake Solenoid (ECM) - Replace
374-5 - 5059 - PILOT CONTROL
- Current Below Normal VALVE
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0374 - FMI 06
- Electronic Control Module
[CDL] Swing Brake Solenoid (ECM) - Replace
374-6 - 5059 - PILOT CONTROL
- Current Above Normal VALVE
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0544 - FMI 08
[J1939] Engine Reference Torque - Electronic Control Module
(ECM) - Replace
[CDL] Engine Cooling Fan Speed Sensor - 1359 - FAN DRIVE
544-8
- 1439 - SENSOR (USE ONLY
- Abnormal Frequency, Pulse Width or FOR SIS ACCESS TO
Period TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
[J1939] Transmission Gear Ratio - MID 039 - CID 0581 - FMI 03
- Electronic Control Module
581-3 [CDL] Power Shift Solenoid (ECM) - Replace
- 5479 - SOLENOID VALVE
- Voltage Above Normal - 7566 - WIRING DIAGRAM
[J1939] Transmission Gear Ratio - MID 039 - CID 0581 - FMI 05
- Electronic Control Module
581-5 [CDL] Power Shift Solenoid (ECM) - Replace
- 5479 - SOLENOID VALVE
- Current Below Normal - 7566 - WIRING DIAGRAM
[J1939] Transmission Gear Ratio - MID 039 - CID 0581 - FMI 06
- Electronic Control Module
581-6 [CDL] Power Shift Solenoid (ECM) - Replace
- 5479 - SOLENOID VALVE
- Current Above Normal - 7566 - WIRING DIAGRAM
586-5 [J1939] Make - MID 039 - CID 0586 - FMI 05
 - Electronic Control Module
[CDL] Engine Speed Dial Switch (ECM) - Replace
- 7332 - ELECTRIC SWITCH
- Current Below Normal (MANUAL)
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0586 - FMI 12
[J1939] Make
- Electronic Control Module
(ECM) - Replace
586-12 [CDL] Engine Speed Dial Switch
- 7332 - ELECTRIC SWITCH
(MANUAL)
- Bad Device or Component
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0588 - FMI 09
- Electronic Control Module
[J1939] Serial Number
(ECM) - Replace
- Electronic Control Module
588-9 [CDL] Monitoring System Display
(ECM) - Flash Program
- 7490 - ELECTRONIC
- Abnormal Update Rate
MONITORING SYSTEM/PANEL
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0590 - FMI 09
- Electronic Control Module
[J1939] Engine Idle Shutdown Timer State
(ECM) - Replace
- Electronic Control Module
590-9 [CDL] Engine Control Module
(ECM) - Flash Program
- 1901 - ENGINE ELECTRONIC
- Abnormal Update Rate
CONTROL MODULE
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0598 - FMI 03
[J1939] Clutch Switch - Electronic Control Module
(ECM) - Replace
598-3 [CDL] Travel Speed Solenoid - 5051 - HYDRAULIC CONTROL
VALVE
- Voltage Above Normal - 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0598 - FMI 05
[J1939] Clutch Switch - Electronic Control Module
(ECM) - Replace
598-5 [CDL] Travel Speed Solenoid - 5051 - HYDRAULIC CONTROL
VALVE
- Current Below Normal - 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- MID 039 - CID 0598 - FMI 06
[J1939] Clutch Switch - Electronic Control Module
(ECM) - Replace
598-6 [CDL] Travel Speed Solenoid - 5051 - HYDRAULIC CONTROL
VALVE
- Current Above Normal - 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
[J1939] Cruise Control Coast (Decelerate) - MID 039 - CID 0600 - FMI 04
Switch - Electronic Control Module
600-4 (ECM) - Replace
[CDL] Hydraulic Oil Temperature Sensor - 509T - HYDRAULIC OIL
TEMPERATURE SENSOR
 - Voltage Below Normal - 7566 - WIRING DIAGRAM
[J1939] Transmission Range Clutch C2
- MID 039 - CID 0735 - FMI 03
Solenoid
- Electronic Control Module
735-3 (ECM) - Replace
[CDL] Heavy Lift Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Transmission Range Clutch C2
- MID 039 - CID 0735 - FMI 05
Solenoid
- Electronic Control Module
735-5 (ECM) - Replace
[CDL] Heavy Lift Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Transmission Range Clutch C2
- MID 039 - CID 0735 - FMI 06
Solenoid
- Electronic Control Module
735-6 (ECM) - Replace
[CDL] Heavy Lift Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Above Normal
- MID 039 - CID 1129 - FMI 03
[J1939] Engine Turbocharger 3 Boost
- Electronic Control Module
Pressure
(ECM) - Replace
1129-3 - 1439 - SENSOR (USE ONLY
[CDL] Right Side Attachment Pedal Sensor
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal
- 7566 - WIRING DIAGRAM
- MID 039 - CID 1129 - FMI 04
[J1939] Engine Turbocharger 3 Boost
- Electronic Control Module
Pressure
(ECM) - Replace
1129-4 - 1439 - SENSOR (USE ONLY
[CDL] Right Side Attachment Pedal Sensor
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal
- 7566 - WIRING DIAGRAM
[J1939] Engine Turbocharger 3 Boost - MID 039 - CID 1129 - FMI 08
Pressure - Electronic Control Module
(ECM) - Replace
1129-8 [CDL] Right Side Attachment Pedal Sensor - 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
- Abnormal Frequency, Pulse Width or TECHNICAL DOCUMENTS)
Period - 7566 - WIRING DIAGRAM
- MID 039 - CID 1130 - FMI 03
[J1939] Engine Turbocharger 4 Boost
- Electronic Control Module
Pressure
(ECM) - Replace
1130-3 - 1439 - SENSOR (USE ONLY
[CDL] Left Side Attachment Pedal Sensor
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal
- 7566 - WIRING DIAGRAM
[J1939] Engine Turbocharger 4 Boost
Pressure - MID 039 - CID 1130 - FMI 04
1130-4 - Electronic Control Module
[CDL] Left Side Attachment Pedal Sensor (ECM) - Replace
 - Voltage Below Normal - 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
[J1939] Engine Turbocharger 4 Boost - MID 039 - CID 1130 - FMI 08
Pressure - Electronic Control Module
(ECM) - Replace
1130-8 [CDL] Left Side Attachment Pedal Sensor - 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
- Abnormal Frequency, Pulse Width or TECHNICAL DOCUMENTS)
Period - 7566 - WIRING DIAGRAM
- MID 039 - CID 1160 - FMI 03
[J1939] Engine Main Bearing #4
- Electronic Control Module
Temperature
(ECM) - Replace
1160-3 - 5059 - PILOT CONTROL
[CDL] Hydraulic Lock Solenoid
VALVE
- 5479 - SOLENOID VALVE
- Voltage Above Normal
- 7566 - WIRING DIAGRAM
- MID 039 - CID 1160 - FMI 05
[J1939] Engine Main Bearing #4
- Electronic Control Module
Temperature
(ECM) - Replace
1160-5 - 5059 - PILOT CONTROL
[CDL] Hydraulic Lock Solenoid
VALVE
- 5479 - SOLENOID VALVE
- Current Below Normal
- 7566 - WIRING DIAGRAM
- MID 039 - CID 1160 - FMI 06
[J1939] Engine Main Bearing #4
- Electronic Control Module
Temperature
(ECM) - Replace
1160-6 - 5059 - PILOT CONTROL
[CDL] Hydraulic Lock Solenoid
VALVE
- 5479 - SOLENOID VALVE
- Current Above Normal
- 7566 - WIRING DIAGRAM
[J1939] Engine Turbocharger 3 - MID 039 - CID 1178 - FMI 03
Compressor Inlet Pressure - Electronic Control Module
(ECM) - Replace
1178-3 [CDL] Machine Overload Warning Pressure - 1439 - SENSOR (USE ONLY
Sensor FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal - 7566 - WIRING DIAGRAM
[J1939] Engine Turbocharger 3 - MID 039 - CID 1178 - FMI 04
Compressor Inlet Pressure - Electronic Control Module
(ECM) - Replace
1178-4 [CDL] Machine Overload Warning Pressure - 1439 - SENSOR (USE ONLY
Sensor FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal - 7566 - WIRING DIAGRAM
- MID 039 - CID 1178 - FMI 08
[J1939] Engine Turbocharger 3
- Electronic Control Module
Compressor Inlet Pressure
(ECM) - Replace
1178-8 - 1439 - SENSOR (USE ONLY
[CDL] Machine Overload Warning Pressure
FOR SIS ACCESS TO
Sensor
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
 - Abnormal Frequency, Pulse Width or
Period
[J1939] Header Tilt Right Valve Drive
- MID 039 - CID 1522 - FMI 03
- Electronic Control Module
[CDL] Relief Valve #2 Check Valve
1522-3 (ECM) - Replace
Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Header Tilt Right Valve Drive
- MID 039 - CID 1522 - FMI 05
- Electronic Control Module
[CDL] Relief Valve #2 Check Valve
1522-5 (ECM) - Replace
Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Header Tilt Right Valve Drive
- MID 039 - CID 1522 - FMI 06
- Electronic Control Module
[CDL] Relief Valve #2 Check Valve
1522-6 (ECM) - Replace
Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Above Normal
[J1939] Header Lift Cylinder Pressure
Diverted Valve Drive - MID 039 - CID 1523 - FMI 03
- Electronic Control Module
1523-3 [CDL] Relief Valve #1 Check Valve (ECM) - Replace
Solenoid - 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Header Lift Cylinder Pressure
Diverted Valve Drive - MID 039 - CID 1523 - FMI 05
- Electronic Control Module
1523-5 [CDL] Relief Valve #1 Check Valve (ECM) - Replace
Solenoid - 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Header Lift Cylinder Pressure
Diverted Valve Drive - MID 039 - CID 1523 - FMI 06
- Electronic Control Module
1523-6 [CDL] Relief Valve #1 Check Valve (ECM) - Replace
Solenoid - 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Above Normal
[J1939] Reel Position Aft Actuator - MID 039 - CID 1525 - FMI 03
- Electronic Control Module
1525-3 [CDL] Straight Travel Solenoid (ECM) - Replace
- 5479 - SOLENOID VALVE
- Voltage Above Normal - 7566 - WIRING DIAGRAM
[J1939] Reel Position Aft Actuator - MID 039 - CID 1525 - FMI 05
- Electronic Control Module
1525-5 [CDL] Straight Travel Solenoid (ECM) - Replace
- 5479 - SOLENOID VALVE
- Current Below Normal - 7566 - WIRING DIAGRAM
1525-6 [J1939] Reel Position Aft Actuator - MID 039 - CID 1525 - FMI 06
 - Electronic Control Module
[CDL] Straight Travel Solenoid (ECM) - Replace
- 5479 - SOLENOID VALVE
- Current Above Normal - 7566 - WIRING DIAGRAM
[J1939] Adaptive Cruise Control Mode
- MID 039 - CID 1590 - FMI 03
- Electronic Control Module
[CDL] Main Pump Flow Limitation Pressure
1590-3 (ECM) - Replace
Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Adaptive Cruise Control Mode
- MID 039 - CID 1590 - FMI 05
- Electronic Control Module
[CDL] Main Pump Flow Limitation Pressure
1590-5 (ECM) - Replace
Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Adaptive Cruise Control Mode
- MID 039 - CID 1590 - FMI 06
- Electronic Control Module
[CDL] Main Pump Flow Limitation Pressure
1590-6 (ECM) - Replace
Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Above Normal
[J1939] Front axle
- MID 039 - CID 1593 - FMI 03
- Electronic Control Module
[CDL] Attachment Valve #1 Extend
1593-3 (ECM) - Replace
Pressure Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Front axle
- MID 039 - CID 1593 - FMI 05
- Electronic Control Module
[CDL] Attachment Valve #1 Extend
1593-5 (ECM) - Replace
Pressure Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Front axle
- MID 039 - CID 1593 - FMI 06
- Electronic Control Module
[CDL] Attachment Valve #1 Extend
1593-6 (ECM) - Replace
Pressure Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Above Normal
[J1939] Rear axle
- MID 039 - CID 1594 - FMI 03
- Electronic Control Module
[CDL] Attachment Valve #2 Extend
1594-3 (ECM) - Replace
Pressure
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Rear axle
- MID 039 - CID 1594 - FMI 05
- Electronic Control Module
[CDL] Attachment Valve #2 Extend
1594-5 (ECM) - Replace
Pressure
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Below Normal
 [J1939] Rear axle
- MID 039 - CID 1594 - FMI 06
- Electronic Control Module
[CDL] Attachment Valve #2 Extend
1594-6 (ECM) - Replace
Pressure
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Above Normal
[J1939] Rear axle
- MID 039 - CID 1595 - FMI 03
- Electronic Control Module
[CDL] Attachment Valve #3 Extend
1595-3 (ECM) - Replace
Pressure Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Rear axle
- MID 039 - CID 1595 - FMI 05
- Electronic Control Module
[CDL] Attachment Valve #3 Extend
1595-5 (ECM) - Replace
Pressure Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Rear axle
- MID 039 - CID 1595 - FMI 06
- Electronic Control Module
[CDL] Attachment Valve #3 Extend
1595-6 (ECM) - Replace
Pressure Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Above Normal
[J1939] Security Entity Length
- MID 039 - CID 1596 - FMI 03
- Electronic Control Module
[CDL] Attachment Valve #1 Retract
1596-3 (ECM) - Replace
Pressure Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Security Entity Length
- MID 039 - CID 1596 - FMI 05
- Electronic Control Module
[CDL] Attachment Valve #1 Retract
1596-5 (ECM) - Replace
Pressure Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Security Entity Length
- MID 039 - CID 1596 - FMI 06
- Electronic Control Module
[CDL] Attachment Valve #1 Retract
1596-6 (ECM) - Replace
Pressure Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Above Normal
[J1939] Data Security Parameter
- MID 039 - CID 1597 - FMI 03
- Electronic Control Module
[CDL] Attachment Valve #2 Retract
1597-3 (ECM) - Replace
Pressure Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Data Security Parameter - MID 039 - CID 1597 - FMI 05
- Electronic Control Module
1597-5
[CDL] Attachment Valve #2 Retract (ECM) - Replace
Pressure Solenoid - 5479 - SOLENOID VALVE
 - 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Data Security Parameter
- MID 039 - CID 1597 - FMI 06
- Electronic Control Module
[CDL] Attachment Valve #2 Retract
1597-6 (ECM) - Replace
Pressure Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Above Normal
[J1939] PGN of message to be
authenticated - MID 039 - CID 1598 - FMI 03
- Electronic Control Module
1598-3 [CDL] Attachment Valve #3 Retract (ECM) - Replace
Pressure Solenoid - 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] PGN of message to be
authenticated - MID 039 - CID 1598 - FMI 05
- Electronic Control Module
1598-5 [CDL] Attachment Valve #3 Retract (ECM) - Replace
Pressure Solenoid - 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] PGN of message to be
authenticated - MID 039 - CID 1598 - FMI 06
- Electronic Control Module
1598-6 [CDL] Attachment Valve #3 Retract (ECM) - Replace
Pressure Solenoid - 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Above Normal
- MID 039 - CID 1609 - FMI 03
[J1939] Adjust local minute offset
- Electronic Control Module
(ECM) - Replace
[CDL] F2 Type Valve Load Sense Pressure
1609-3 - 1439 - SENSOR (USE ONLY
Sensor
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal
- 7566 - WIRING DIAGRAM
- MID 039 - CID 1609 - FMI 04
[J1939] Adjust local minute offset
- Electronic Control Module
(ECM) - Replace
[CDL] F2 Type Valve Load Sense Pressure
1609-4 - 1439 - SENSOR (USE ONLY
Sensor
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal
- 7566 - WIRING DIAGRAM
[J1939] Adjust local minute offset - MID 039 - CID 1609 - FMI 08
- Electronic Control Module
[CDL] F2 Type Valve Load Sense Pressure (ECM) - Replace
1609-8 Sensor - 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
- Abnormal Frequency, Pulse Width or TECHNICAL DOCUMENTS)
Period - 7566 - WIRING DIAGRAM
[J1939] Engine Injector Needle Lift Sensor
1657-3 - MID 039 - CID 1657 - FMI 03
#1
 - Electronic Control Module
[CDL] Left Joystick Thumbwheel (ECM) - Replace
- 5705 - JOYSTICK
- Voltage Above Normal - 7566 - WIRING DIAGRAM
[J1939] Engine Injector Needle Lift Sensor
- MID 039 - CID 1657 - FMI 04
#1
- Electronic Control Module
1657-4 (ECM) - Replace
[CDL] Left Joystick Thumbwheel
- 5705 - JOYSTICK
- 7566 - WIRING DIAGRAM
- Voltage Below Normal
[J1939] Engine Injector Needle Lift Sensor
#1 - MID 039 - CID 1657 - FMI 08
- Electronic Control Module
1657-8 [CDL] Left Joystick Thumbwheel (ECM) - Replace
- 5705 - JOYSTICK
- Abnormal Frequency, Pulse Width or - 7566 - WIRING DIAGRAM
Period
[J1939] Engine Injector Needle Lift Sensor
- MID 039 - CID 1658 - FMI 03
#2
- Electronic Control Module
1658-3 (ECM) - Replace
[CDL] Right Joystick Thumbwheel
- 5705 - JOYSTICK
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Engine Injector Needle Lift Sensor
- MID 039 - CID 1658 - FMI 04
#2
- Electronic Control Module
1658-4 (ECM) - Replace
[CDL] Right Joystick Thumbwheel
- 5705 - JOYSTICK
- 7566 - WIRING DIAGRAM
- Voltage Below Normal
[J1939] Engine Injector Needle Lift Sensor
#2 - MID 039 - CID 1658 - FMI 08
- Electronic Control Module
1658-8 [CDL] Right Joystick Thumbwheel (ECM) - Replace
- 5705 - JOYSTICK
- Abnormal Frequency, Pulse Width or - 7566 - WIRING DIAGRAM
Period
[J1939] Engine Turbocharger Oil Level
- MID 039 - CID 1665 - FMI 03
Switch
- Electronic Control Module
(ECM) - Replace
1665-3 [CDL] Variable Relief Valve #1 Pressure
- 5571 - SOLENOID & RELIEF
Solenoid
VALVE
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Engine Turbocharger Oil Level
- MID 039 - CID 1665 - FMI 05
Switch
- Electronic Control Module
(ECM) - Replace
1665-5 [CDL] Variable Relief Valve #1 Pressure
- 5571 - SOLENOID & RELIEF
Solenoid
VALVE
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Engine Turbocharger Oil Level
1665-6 - MID 039 - CID 1665 - FMI 06
Switch
 - Electronic Control Module
[CDL] Variable Relief Valve #1 Pressure (ECM) - Replace
Solenoid - 5571 - SOLENOID & RELIEF
VALVE
- Current Above Normal - 7566 - WIRING DIAGRAM
[J1939] Automatic Gear Shifting Enable
- MID 039 - CID 1666 - FMI 03
Switch
- Electronic Control Module
(ECM) - Replace
1666-3 [CDL] Variable Relief Valve #2 Pressure
- 5571 - SOLENOID & RELIEF
Solenoid
VALVE
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Automatic Gear Shifting Enable
- MID 039 - CID 1666 - FMI 05
Switch
- Electronic Control Module
(ECM) - Replace
1666-5 [CDL] Variable Relief Valve #2 Pressure
- 5571 - SOLENOID & RELIEF
Solenoid
VALVE
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Automatic Gear Shifting Enable
- MID 039 - CID 1666 - FMI 06
Switch
- Electronic Control Module
(ECM) - Replace
1666-6 [CDL] Variable Relief Valve #2 Pressure
- 5571 - SOLENOID & RELIEF
Solenoid
VALVE
- 7566 - WIRING DIAGRAM
- Current Above Normal
[J1939] Aux Valve 2 Port Flow Command
- MID 039 - CID 1931 - FMI 03
- Electronic Control Module
[CDL] Auxiliary Circuit Flow Combining
1931-3 (ECM) - Replace
Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Aux Valve 2 Port Flow Command
- MID 039 - CID 1931 - FMI 05
- Electronic Control Module
[CDL] Auxiliary Circuit Flow Combining
1931-5 (ECM) - Replace
Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Below Normal
[J1939] Aux Valve 2 Port Flow Command
- MID 039 - CID 1931 - FMI 06
- Electronic Control Module
[CDL] Auxiliary Circuit Flow Combining
1931-6 (ECM) - Replace
Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Above Normal
[J1939] Aux Valve 9 Extend Port Estimated - MID 039 - CID 2265 - FMI 03
Flow - Electronic Control Module
(ECM) - Replace
2265-3 [CDL] Hydraulic Pump #1 Outlet Pressure - 1439 - SENSOR (USE ONLY
Sensor FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal - 7566 - WIRING DIAGRAM
 [J1939] Aux Valve 9 Extend Port Estimated - MID 039 - CID 2265 - FMI 04
Flow - Electronic Control Module
(ECM) - Replace
2265-4 [CDL] Hydraulic Pump #1 Outlet Pressure - 1439 - SENSOR (USE ONLY
Sensor FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal - 7566 - WIRING DIAGRAM
[J1939] Aux Valve 9 Extend Port Estimated
- MID 039 - CID 2265 - FMI 08
Flow
- Electronic Control Module
(ECM) - Replace
[CDL] Hydraulic Pump #1 Outlet Pressure
2265-8 - 1439 - SENSOR (USE ONLY
Sensor
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Abnormal Frequency, Pulse Width or
- 7566 - WIRING DIAGRAM
Period
[J1939] Aux Valve 9 Retract Port Estimated - MID 039 - CID 2266 - FMI 03
Flow - Electronic Control Module
(ECM) - Replace
2266-3 [CDL] Hydraulic Pump #2 Outlet Pressure - 1439 - SENSOR (USE ONLY
Sensor FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Above Normal - 7566 - WIRING DIAGRAM
[J1939] Aux Valve 9 Retract Port Estimated - MID 039 - CID 2266 - FMI 04
Flow - Electronic Control Module
(ECM) - Replace
2266-4 [CDL] Hydraulic Pump #2 Outlet Pressure - 1439 - SENSOR (USE ONLY
Sensor FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Voltage Below Normal - 7566 - WIRING DIAGRAM
[J1939] Aux Valve 9 Retract Port Estimated
- MID 039 - CID 2266 - FMI 08
Flow
- Electronic Control Module
(ECM) - Replace
[CDL] Hydraulic Pump #2 Outlet Pressure
2266-8 - 1439 - SENSOR (USE ONLY
Sensor
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- Abnormal Frequency, Pulse Width or
- 7566 - WIRING DIAGRAM
Period
[J1939] Aux Valve 10 Extend Port
- MID 039 - CID 2275 - FMI 03
Measured Flow
- Electronic Control Module
2275-3 (ECM) - Replace
[CDL] Hammer Return To Tank Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Voltage Above Normal
[J1939] Aux Valve 10 Extend Port
- MID 039 - CID 2275 - FMI 06
Measured Flow
- Electronic Control Module
2275-6 (ECM) - Replace
[CDL] Hammer Return To Tank Solenoid
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- Current Above Normal
[J1939] Aux Valve 10 Extend Port Pressure - MID 039 - CID 2280 - FMI 03
- Electronic Control Module
2280-3
[CDL] Travel Alarm Relay (ECM) - Replace
- 4493 - RELAY
 - Voltage Above Normal - 7566 - WIRING DIAGRAM
- MID 039 - CID 2300 - FMI 09
[J1939] Aux Valve 12 Retract Port - Electronic Control Module
Measured Flow (ECM) - Replace
2300-9 - Electronic Control Module
[CDL] Switch Panel (ECM) - Flash Program
- 7451 - INSTRUMENT
- Abnormal Update Rate PANEL/CONTROL PANEL
- 7566 - WIRING DIAGRAM
- MID 039 - CID 2420 - FMI 03
[J1939] Process Data Type 1 - Wiring Harness (Short Circuit) -
Test
2420-3 [CDL] Boom Cylinder Extend Limit Solenoid - Electronic Control Module
(ECM) - Replace
- Voltage Above Normal - 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- MID 039 - CID 2420 - FMI 05
- System Schematic
[J1939] Process Data Type 1
- Wiring Harness (Open Circuit) -
Test
2420-5 [CDL] Boom Cylinder Extend Limit Solenoid
- Electronic Control Module
(ECM) - Replace
- Current Below Normal
- 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- MID 039 - CID 2420 - FMI 06
[J1939] Process Data Type 1 - Wiring Harness (Short Circuit) -
Test
2420-6 [CDL] Boom Cylinder Extend Limit Solenoid - Electronic Control Module
(ECM) - Replace
- Current Above Normal - 5479 - SOLENOID VALVE
- 7566 - WIRING DIAGRAM
- MID 039 - CID 2425 - FMI 03
- Wiring Harness (Short Circuit) -
Test
[J1939] Implement Type 1 - Wiring Harness (Open Circuit) -
Test
2425-3 [CDL] Boom Angle Sensor - Electronic Control Module
(ECM) - Replace
- Voltage Above Normal - 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
- MID 039 - CID 2425 - FMI 04
- Wiring Harness (Short Circuit) -
[J1939] Implement Type 1 Test
- Electronic Control Module
2425-4 [CDL] Boom Angle Sensor (ECM) - Replace
- 1439 - SENSOR (USE ONLY
- Voltage Below Normal FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM
2425-13 [J1939] Implement Type 1 - MID 039 - CID 2425 - FMI 13
 - Electronic Control Module
[CDL] Boom Angle Sensor (ECM) - Replace
- Calibration
- Out of Calibration - 1439 - SENSOR (USE ONLY
FOR SIS ACCESS TO
TECHNICAL DOCUMENTS)
- 7566 - WIRING DIAGRAM

Component Based Troubleshooting is for technical reference only. It is not intended to replace the knowledge and skills of the
servicing technician, and does NOT imply warranty coverage.

Content Owner: Brian Hall

Caterpillar Confidential: Green
Copyright 2004 - 2011 Caterpillar Inc.
All Rights Reserved.

To view other code types click one of the links below.

Diagnostic Troubleshoot Code | Event

Description
Codes SIS Links
[Data Link] SPN, CID, or PID - FMI
[J1939] Battery Potential
- MID 122 - CID 0168 - FMI 00
[CDL] Electrical System Voltage - Electronic Control Module
(ECM) - Replace
168-0 - Charging System
[ATA] ECM Battery Power
Troubleshooting
- Data Valid but Above Normal Operating - 1406 - CHARGING SYSTEM
Range (most severe) - 7566 - WIRING DIAGRAM

[J1939] Battery Potential

- MID 122 - CID 0168 - FMI 01
- Electronic Control Module
[CDL] Electrical System Voltage
(ECM) - Replace
168-1 - Charging System
[ATA] ECM Battery Power
Troubleshooting
- 1406 - CHARGING SYSTEM
- Data Valid But Below Normal Operating
- 7566 - WIRING DIAGRAM
Range (most severe)
- MID 122 - CID 0254 - FMI 04
- Electronic Control Module
[CDL] Electronic Control Module
(ECM) - Replace
- Charging System
254-4 [ATA] ECM Fault
Troubleshooting
- 7610 - PROGRAMMABLE
- Voltage Below Normal
CONTROL
- 7566 - WIRING DIAGRAM
[CDL] Electronic Control Module
254-12 - MID 122 - CID 0254 - FMI 12
 [ATA] ECM Fault - Electronic Control Module
(ECM) - Replace
- Bad Device or Component - 7610 - PROGRAMMABLE
CONTROL
- 7566 - WIRING DIAGRAM
- MID 122 - CID 0269 - FMI 03
[CDL] Sensor Power Supply - Electronic Control Module
269-3 (ECM) - Replace
- Voltage Above Normal - 1408 - WIRING HARNESS
- 7566 - WIRING DIAGRAM
- MID 122 - CID 0269 - FMI 04
[CDL] Sensor Power Supply - Electronic Control Module
269-4 (ECM) - Replace
- Voltage Below Normal - 1408 - WIRING HARNESS
- 7566 - WIRING DIAGRAM
- MID 122 - CID 1250 - FMI 09
[J1939] Calibration Record Start Month
- Electronic Control Module
(ECM) - Replace
1250-9 [CDL] Remote Communication Module
- 7606 - PRODUCT LINK
SYSTEM
- Abnormal Update Rate
- 7566 - WIRING DIAGRAM
[J1939] Calibration Record Start Day - MID 122 - CID 1251 - FMI 03
- Electronic Control Module
1251-3 [CDL] Alternator R-Terminal Signal (ECM) - Replace
- 1406 - CHARGING SYSTEM
- Voltage Above Normal - 7566 - WIRING DIAGRAM

Component Based Troubleshooting is for technical reference only. It is not intended to replace the knowledge and skills of the
servicing technician, and does NOT imply warranty coverage.

Content Owner: Brian Hall

Caterpillar Confidential: Green
Copyright 2004 - 2011 Caterpillar Inc.
All Rights Reserved.