Signal-to-Noise, Carrier-to-Noise, EbNo

on Signal Quality Ratios

by Wolfgang Damm, WTG

Agenda

Signal Measurement Environment

Ratios: S/N, C/N, C/No, C/I, EbNo

Shannon Limit

Error Correction

BER & Coding Schemes

Noisecom CNG-EbNo

Questions - Answers
Technologies effected by Power Measurements

Satellite Communication R&D, System Monitoring

Cable TV R&D, bandwidth analysis, throughput

optimization, amplifiers,

Telecommunications R&D, QoS, amplifiers,

Chip Manufacturing Amplifiers, Receivers, Transmitters

Wireless Data Networks R&D, System Monitoring,

Backbone & Directed RF Optimization, Monitoring
links

mmWave applications e.g. 60G

Signal Quality: Essential for Data Transmission

Data transmission has to work under challenging

circumstances: weak signals and high noise levels

Requirement: High data rates, reliability, low BER

Designers, developers and system engineers have to take less-

than-ideal circumstances in consideration.
Signal Environment
Signal Measurement Environment 1

P
Signal
High
Signal
Power

f
Signal Measurement Environment 2

P
Signal

Signal
Power
Limitations

f
Signal Measurement Environment 3

Signal

Lower power
level due to
spread spectrum

f
Signal Measurement Environment 4

Intrinsic noise
P (amplifier, demodulator) Signal

Noise
Floor

f
Signal Measurement Environment 5

Intrinsic noise
P (amplifier, demodulator) Signal

Neighbor
channels

Noise
Floor

f
Communication Challenges

Satellite
Communication
10101000101110001

Wireless Data

10101000101110001 Limited Power

Limited Bandwidth
Very low Signal Levels
Noise
Interferers
Cable TV Limited Data Processing Power
Shannon Limit

ShannonHartley theorem:
The limit of reliable data rate of a channel depends on band-
width and signal-to-noise ratio according to:

Signal
power (S)
R information rate in bits per second;
B channel bandwidth in Hertz;
Noise
power (N) S total signal power (equivalent to the
carrier power C)
N total noise power in the bandwidth.
Bandwidth (B)
f
Forward Error Correction (FEC)

FEC is a system of error control for data transmission. The sender

adds redundant data to its messages (error correction code).

Example (2 Bit overhead):

Triplet Interpreted Advantages:

received as
High degree of fault tolerance
000 0

001 0
No back-channel required
010 0
Simple logic (cost efficient, fast)
100 0

111 1 Disadvantages:
110 1 Adds data redundancy to link budget
101 1

011 1
Ratios

C/N Carrier to noise

C/No Carrier to noise density
Eb/No Energy per bit to noise density
C/I Carrier to interferer
Carrier to Noise Ratio (C/N)

What is it? P

C/N is the ratio of the relative

power level to the noise level in
the bandwidth of a system. Carrier
power (C)

Why: Noise

Allows to analyze if a carrier

power (N)

can still be recognized as such,

or if it is obliterated by ambient
and system noise. C/N Provides Bandwidth (B)
f
a value for the quality of a
communication channel. C and N may be measured in watts or in volts squared

How:
The quality of the system is A Carrier is modulated and measured at the input of the demodulator

usually determined through A Signal is demodulated and usually measured at the output of the
demodulator
BER plots against C/N.
C/N Example
-15.0

-20.0

-25.0

-30.0

-35.0

-40.0

-45.0

-50.0

dBm

Example: Spectrum of a QPSK signal interfered by ambient white noise. The

horizontal axis shows the frequency in Hertz, and the vertical axis the power in dBm
In this example, the C/N is (32.5 dBm) (48 dBm) = 15.5
Noise Spectral Density (No)

What is No? P

Noise spectral density (No) is defined

as the amount of (white) noise energy
per bandwidth unit (Hz).

No = N / B Noise
power (N)

No is often expressed as:

1Hz
Bandwidth (B) f
No = k T
where Units of No are:
k is the Boltzmann's constant in Joules [J], Watts/Hz [W/Hz] or Watts * s [Ws].
Joules per Kelvin [J/K], and All three units express the very same metric..
T is the receiver system noise
temperature in Kelvin [K] [J] = [W / Hz] = [Ws]
Carrier to Noise Spectral Density Ratio (C/No)

What is it? P

C/No is the ratio of the power

level to the noise power spectral
density (normalized noise level
Carrier
power (C)
relative to 1 Hz) in a system.
Noise
Why: power (N)

Similar as C/N but C/No does not

factor the actual noise bandwidth 1Hz
in. This simplifies analysis of Bandwidth (B) f
systems where variation of the
(utilized) BW may apply.

How:
As C/N, C/No is usually
determined through BER plots.
Energy per Bit (Eb)

What is Eb? P

Energy per information bit (i.e. the

energy per bit net of FEC overhead Carrier
10101000101
bits). Carrier power divided by actual power (C)
information bits.

Eb = C / R
where
C is the carrier power, and f

R is the actual information bit rate. Simplified depiction of Eb. Bits in modulation schemes are
not as shown directly linked to a certain frequency.

Why?
Using the Eb rather than overall carrier Unit of Eb is:
power (C) allows comparing different Joules [J], Watts/Hz [W/Hz] or Watts * s [Ws].
modulation schemes easily. All three units express the very same metric..
Energy per Bit to Noise Spectrum Density (Eb/No)

What is it? P

Eb/No is the ratio of the Energy

per Bit divided by the noise
power density. Carrier
power (C)
10101000101

Why: Noise

Allows comparing bit error rate

power (N)

(BER) performance (effective-

ness) of different digital modu- 1Hz
lation schemes. Both factors are Bandwidth (B)
f
normalized, so actual bandwidth
is no longer of concern.

How:
Modulation schemes are com- Eb / No is a dimensionless ratio.
pared through BER plots against
Eb/No.
BER, Coding Scheme and Eb/No

Coding
improvement
Eb/No

Eb / No is commonly used with

modulation and coding design
for noise-limited rather than
interference-limited communi-
cation systems, and for power-
limited rather than bandwidth-
limited communication
systems. Examples of power-
limited systems include spread
spectrum and deep-space,
which are optimized by using
large bandwidths relative to the
bit rate. MSK: Minimum shift keying
PSK: Phase shift keying
DBPSK: Differential binary phase shift keying
DQPSK: Differential quadrature phase shift keying
OOK: On-off-keying
OFSK: Orthogonal frequency shift keying
Analyzing Ratios (EbNo)

Carrier Receiver

Tuning carrier or
noise level shifts Eb/No

Noise
Source
CNG EbNo

Transmitter Receiver

Noise
Source

CNG Eb/No does exactly this, it

automatically sets the desired Eb/No
quickly and very accurately. Based on
the user-specified carrier output level,
Eb/No ratio, and bit rate, the instrument
calculates for example the maximum
noise density.
Correlation: C/N, C/No and Eb/No

C/N, C/No and Eb/No are correlated

C / N = C / (No * B) = (Eb / No) * (R / B) R information rate in bits per second;

B channel bandwidth in Hertz;
C total carrier power
Eb / No = (C / N) * (B / R) N total noise power in the bandwidth.

No = (N * Eb *R) / B * C

C / N dB = 10 log (Eb/No) + 10 log (R / B)

Carrier to Interference Ratio (C/I, CIR)

What is it? P
C/I is the quotient between the
average received modulated carrier
power C and the average received Carrier
power (C)
co-channel interference power I
( i.e. cross-talk, from other
transmitters than the useful
signal).

Why: Channel Channel

Allows analysis and rating of Interference 1 Interference 2

channel channel robustness against

neighbor channels. C / I = C / (I1 + I2 + In)

How:
As C/N and C/No, C/I is usually C / I is a dimensionless ratio
analyzed through BER plots.
CNG EbNo Application

The CNG EbNo, simulates the transmitter-receiver link and

measures relevant transmission quality parameters at the same
time.
Product Specification Examples
CNG EbNo Specs (excerpt)

Carrier Path Noise Path

Input Power -55 dBm to +5 dBm Output Power -55 dBm to +5 dBm
Range: Range:
Max Input +21 dBm (with no damage) Flatness: +/- 0.2 dB / 40 MHz
Power: +/- 0.3 dB / 80 MHz
Nominal +/-1.0 dB +/- 0.4 dB / 200 MHz
gain: +/- 0.5 dB / 300 MHz

Gain 0 to 60 dB in 0.1 dB steps Attenuation 60 dB in 0.25 dB steps

resolution: range: (0.1 dB opt)

Gain 0.2 dB for 70 MHz +/-20 MHz

flatness: 0.3 dB for 140 MHz +/-40 MHz
0.4 dB for others
Group +/-.20 ns/40 MHz for
Delay: frequencies above 20 MHz

CNG EbNos are available with a wide variety of frequency bands. Please check:
http://noisecom.com/products/instruments/cng-ebno-snr-noise-generator for more information
or contact your next Noisecom representative.
CNG EbNo vs. Spectrum Analyzer

The CNG EbNo offers a variety of advantages over discrete instruments

when measuring C/N, C/No, Eb/No or C/I:

Automated procedure, therefore repeatable measurements provided

quickly
Highest accuracy through substitution calibration method
Automated calculation of results
Customer specific configuration depending on the application
Conclusion

Signal Measurement Environment

Ratios: C/N, C/No, C/I, EbNo

Shannon Limit

Error Correction

BER & Coding Schemes

Noisecom CNG-EbNo
Questions Answers
CNG EbNo Block Diagram (simplified)

OUT

+
AWGN

Sig

dB

Controller Power
Meter
Questions Answers
 THANK YOU !

Join us for our next Webinar:

Amplifier Testing: New Methods (Part I)
by Bob Muro, WTG
Date: 12/15/2010
Addendum