NORDIMPIANTI P R O D U C T S A P P L I C A T I O N S T U R N K E Y S E R V I C E G L O B A L

Hollow Core Slabs

Applications

Hollow Core Slabs

Technology for the Precast and Prestressed Concrete Industry

 HOLLOW CORE SLABS
FIELD APPLICATIONS EXTRUDER evo SLIPFORMER sf
HOLLOW CORE
RESIDENTIAL, SOCIAL,SLABS EXTRUDER
INDUSTRIAL, COMMERCIAL
INFRASTRUCTURE CONSTRUCTION
SLIPFORMER
A P P L I C A T I O N

PRODUCED BY
EXTRUDER evo - SLIPFORMER sf

ELEMENT DIMENSIONS
CAN BE CUSTOMISED

Hollow core slabs are prestressed concrete elements that have a constant cross section. They are
manufactured using high tensile strength prestressed strands or single wire which are embedded
within the element.
The production of these elements is achieved using our Extruder and Slipformer machines that
cast in one phase along a production bed without the need of any formworks.
Hollow core slabs are highly developed structural elements and are used all over the world due
to their many advantages and diverse applications.
Today they are one of the most well known prefabricated elements
because of their technical and economic characteristics.
Hollow core slabs are widely used for flooring and wall panels in industrial,
commercial, residential and infrastructure construction.
Hollow core slabs can be used with different supporting structures:
concrete constructed walls, brick built walls, steel structures, on-site
concrete cast structures, prefabricated beams etc.
For infrastructure hollow core slabs are used extensively to protect roads
from natural dangers. They are used to construct anti-landslide and avalanche guards as well as
the road decking itself, all elements requiring high loading specifications.
Moreover hollow core slabs possess certifiable fire resistances and offer an economic solution to
construct fire stop walls for warehouses, industrial buildings and car parks.

Concrete
Experience

2
Prestressed Hollow
Core slabs
produced by the best quality
casting machines available
 TOP 16 ADVANTAGES OF HOLLOW CORE SLABS

ASSURED QUALIT Y BIG COST SAVINGS

EXCELLENT LOWER SURFACE FINISH EFFICIENT SPAN/DEPTH-RATIO LEADING
A P P L I C A T I O N READY TO PAINT TO REDUCED STOREY HEIGHT
QUICK AND EASY INSTALLATION HIGH DURABILIT Y AND LOAD RESISTANCE
EXCELLENT FIRE RESISTANCE LONG SPANS WITHOUT THE NEED OF
TEMPORARY SUPPORTS
HIGH LOAD CAPACIT Y AND RIGIDIT Y EXCELLENT THERMAL PROPERTIES AND
EASY PROJEC T IMPLEMENTATION GIVING ACOUSTIC INSULATION
DESIGNERS GREATER VERSATILIT Y GREEN PRODUC T REDUCED USE OF RAW
EASILY ADAPTED TO ENABLE MOUNTING MATERIAL
OF ANCILLARY BUILDING SYSTEMS CAN BE USED IN SEISMIC ZONES
REDUCED SELF-WEIGHT PRODUC TION FLEXIBILIT Y

1) ASSURED QUALITY 2) EXCELLENT LOWER SURFACE FINISH READY

By using specific equipment for the TO PAINT
manufacture of the concrete elements and a The lower surface of the element is smooth having a
high end quality control system. steel formwork finish. Generally this surface can be left
as seen or can be simply painted.

3) QUICK AND EASY INSTALLATION 4) EXCELLENT FIRE RESISTANCE

With only 3-4 workers it is possible to install Through the choice of the different thicknesses
more than 500-600 m2 of floor per day. of the lower part of the element, floors can be
produced with a high fire resistance up to 180
minutes.

4
TOP 16 ADVANTAGES OF HOLLOW CORE SLABS

5) HIGH LOAD CAPACITY AND RIGIDITY 6) EASY PROJECT IMPLEMENTATION GIVING

Hollow core slabs have minimal deformation DESIGNERS GREATER VERSATILITY
even with high slenderness ratios due to the Hollow core slabs have a wide range of applications.
transversal load distribution and even when They can be produced up to 25 m long.
the elements do not have any concrete They are very common in the residential, healthcare,
topping. education, industrial and commercial markets and
The produced elements have high load also in seismic zones.
resistances thanks to a low water/cement It is possible to manufacture elements with end
ratio of concrete from 0.32 to 0.38. Higher openings that are then filled on-site in an orthogonal
water/cement ratios cannot be employed direction to the floor creating solid ends to increase
for the production of desired cross sections shear resistance.
without the use of expensive formworks.
Even though the low water/cement ratio
employed makes the concrete hard to work,
NORDIMPIANTIs machines have no difficulty
producing particular element shapes with
high levels of reliability.

7) EASILY ADAPTED TO ENABLE MOUNTING 8) REDUCED SELF-WEIGHT

OF ANCILLARY BUILDING SYSTEMS The presence of longitudinal voids in the cross-section leads to
Hollow core slabs are ideal for the mounting approx. 50% saving in concrete compared with a plain cast
of ancillary plant such as electrical trays, water in-situ reinforced slab, and at the same time cuts the amount
sprinkler and HVAC systems. of prestressing steel by 30% because of the lower self-weight.

5
TOP 16 ADVANTAGES OF HOLLOW CORE SLABS

9) ) BIG COST SAVINGS 10) EFFICIENT SPAN/DEPTH-RATIO LEADING TO

Large production volumes with uniform cross REDUCED STOREY HEIGHT
sections even with different cable reinforcement Precast prestressed hollow core floors offer maximum
configurations.Once the concrete elements have efficiency to the user. Due to the slenderness of the products
been produced they can be removed from the and long span capacities, they allow for maximum exploitation
casting beds after just 6-8 hours. of the available building space.
The use of high tensile strength prestressed The figure shows a vertical section through a tower building
strands, wires or single wire means that the of 37 floors. The total floor slab and topping is only 40 cm.
prestressed elements have smaller cross sections Compared to the classic in-situ construction, it has been
using concrete more efficiently and thus possible to add one more storey within the maximum
achieving elements of the highest quality. building height imposed by the town planning directives in
Smaller cross sections mean lighter panels reducing San Paolo, Brazil.
the cost of transport and allowing easy handling
both on-site and in the production plant.

11) HIGH DURABILITY AND LOAD RESISTANCE 12) LONG SPANS WITHOUT THE NEED OF
The element guarantees high fire resistance TEMPORARY SUPPORTS
because of the Extruder and Slipformer Applicable to all loads and spans meaning that there is no
technologies used for element production and need for supports during installation. It is possible to load the
also due to the low cement/water ratio used in floor immediately after installation, even without any in-situ
the concrete mix. concrete casting.
The quality of the casting machines guarantees
a high compaction level and impermeability
combined with a high mechanical resistance

6
TOP 16 ADVANTAGES OF HOLLOW CORE SLABS

13) EXCELLENT THERMAL PROPERTIES 14) GREEN PRODUCT REDUCE

AND ACOUSTIC INSULATION USE OF RAW MATERIAL
Hollow core slabs have good sound insulation Hollow core slabs are economic with their use of materials.
properties, especially against airborne sound One reason is that the precaster normally uses fairly high
transmission, reducing noise from the external concrete and steel grades, consequently the products use
environment and in providing sound separation less materials to achieve the same load bearing capacity as
between rooms below and above. cast in-situ structures. The smaller dimensions result in less
Impact sound insulation properties are similar dead load to carry.
as with other solid slabs and depend merely on Hollow core slabs are better than other types of floors, because
the type of floor covering. A better and more of their efficient use of materials. The presence of longitudinal
fundamental solution is to use structural methods voids in the cross-section leads to about 45% saving in
such as raised floor or floating floors. The raised concrete compared with a plain in-situ cast reinforced slab,
floor system is however seldom used in residential and at the same time cuts the amount of prestressing steel by
buildings. 30% because of its lower intrinsic weight.

15) CAN BE USED IN SEISMIC ZONES 16) PRODUCTION FLEXIBILITY

Hollow core panels fully satisfy the anti-seismic Possibility to change the dimensions of the concrete elements
standards of the most developed countries. For and the prestressed steel wire configuration according to the
this specific purpose the floor elements can be technical specifications of the element required. It is a simple
connected to each other using steel reinforcement and quick operation to change the necessary parts of the
during construction in order to create floor forming insert of the casting machine to vary the height and the
continuity even without the concrete topping. thickness of the concrete elements.
This gives the floor the correct static characteristics For the most demanding applications or in case of high concrete
required for seismic zones. elements, the lower part of the element and the vertical ribs are
reinforced with steel mesh and connection bars.

7
 FIELD APPLICATIONS
THE DIFFERENT APPLICATIONS OF HOLLOW CORE SLABS

Hollow Core Slabs have many applications in

residential, social, industrial, commercial and
A P P L I C A T I O N
infrastructure construction where elements
with high loads and up to 180 minutes of fire
resistance are called for.

INDUSTRIAL ROOF COVERINGS

CAR PARKING UNDERGROUND CAR PARKING

8
LARGE COMMERCIAL ROOF COVERS

FLOORS FOR MULTISTOREY BUILDINGS GRANDSTAND PANEL

USED WITH STEEL STRUCTURES CONTINOUS FLOORING

It is possible to connect the floor elements using

steel reinforcement during construction in order to
create floor continuity giving the floor the correct
static characteristics required for seismic zones.

9
Extruder Technology
Hollow Core Slabs
HOLLOW CORE SLABS PRODUCED BY EXTRUDER
EXTRUDER EVO e60, e120, e125, e150, e240

The hollow core slabs produced by The extruder machine casts elements in a
NORDIMPIANTIs evo Extruders offer cost- single phase using the extrusion method
effective solutions for companies who are without the need for vibration thus keeping
looking for a flexible approach to produce the noise of the machine to a minimum.
hollow core slabs in various sizes. Concrete is pushed into place around the
Standard heights range from 150mm to 520 forming tubes by the Archimedean screws
mm while the widths available are 600 mm, ensuring an excellent level of compaction at
1200 mm, 1250 mm, 1500 mm and 2400 mm. every point along the element.
The forming tubes and the side formers create
the shape and the voids of the element.
The heights of the elements, as well as
the thickness of the vertical ribs can be
varied within certain limits according to the
application and the element specifications
required.

Extruder EVO e60, e120,

e125, e150 and e240
600-2400 mm wide, 150-500 mm high

The key features of the NORDIMPIANTI EVO Extruder are:

High level of concrete compaction Proven reliability

All the motors are INVERTER driven allowing Heavy-duty construction;
precise control of the machine; NORDIMPIANTI Extruder machines are
Excellent surface finish; Internationally proven;
Precise control of the dimensions of the slab; Most of mechanical parts are galvanized
Function to control the level of compaction for durability and easy maintenance;
adjusting the machine to suit the type of Third party components are sourced from
concrete and the elements being produced. the worlds most renowned suppliers.

Production flexibility User friendly

Slab heights from 150mm to 520mm; New operator control panel;
A vast range of standard or customised Production data acquisition to analyse
cross sections to meet any technical machine use and production costs;
requirement; Wear materials designed for long service life;
Extruder evo machines can be supplied Wear parts engineered to be changed with
to produce slabs with widths 2 x 600 mm, the minimum of down-time;
1200 mm, 1250 mm, 1500 mm, 2 x 1200 Rapid production changeover to manufacture
mm or 2400 mm. different profiles and slab heights;
Machine noise kept to a minimum.

The hollow core slabs can

ONLY
NORDIMPIANTI
be produced with certifiable
fire resistances up to 180
TECHNOLOGY
minutes without changing any
components on the machine.

11
 HOLLOW CORE SLABS MADE BY EXTRUDER evo

We have a range of machines capable of

meeting all your needs

THE CHOICE IS YOURS!

2x600 mm wide 1200 mm wide 1250 mm wide

8 8
hole hole

h150 mm Kg/m 220 h150 mm Kg/m 224 h150 mm Kg/m 216

4 6 6
hole hole hole

h180 mm Kg/m 241 h200 mm Kg/m 242 h200 mm Kg/m 248

5 5
hole hole

h200 mm Kg/m 263

h265 mm Kg/m 303 h265 mm Kg/m 304

h320 mm Kg/m 378 h320 mm Kg/m 379

4 4
hole hole

h400 mm Kg/m 432 h400 mm Kg/m 424

h500 mm Kg/m 521 h500 mm Kg/m 504

12
Extruder Modular and Interchangeable

1500 mm wide 2x1200 mm wide or 2400 mm wide

7 6
hole hole

h220 mm Kg/m 267 h200 mm Kg/m 242

5 or 5+5
hole

h265 mm Kg/m 303 h265 mm Kg/m 708

h320 mm Kg/m 378 h320 mm Kg/m 916

4 or 4+4
hole

h400 mm Kg/m 432 h400 mm Kg/m 1037

h500 mm Kg/m 521 h500 mm Kg/m 1257

13
 Slipformer Technology
Hollow Core Slabs

14
HOLLOW CORE SLABS PRODUCED BY SLIPFORMER
SLIPFORMER SF120

The hollow core slabs produced by The sf Slipformer casts elements in a single phase
NORDIMPIANTIs sf Slipformers offer cost-effective using the vibration method without the need for
solutions for companies who are looking for a formworks.
flexible approach to produce hollow core slabs Concrete is delivered from the main hopper by
for floors and walls in various sizes. feeding tables into delivery hoppers mounted
Standard heights range from 80mm to 1000 mm on the forming insert. From here the concrete is
while the width can be up to 1200 mm. Different delivered to the production bed and the voids
widths are available according to customer are formed by a set of forming tubes. Special
requirements. vibrating groups provide a two stage vibration
process ensuring an excellent level of compaction
at every point along the element.
The heights of the elements, as well as the
thickness of the vertical ribs can be varied within
certain limits according to the application and
the element specifications required.

Slipformer sf
600-2400 mm wide, 80-1000 mm high

The key features of the NORDIMPIANTI sf Slipformer are:

High concrete compaction Reliability

The Slipformer vibration motors are specially Heavy-duty construction;
designed for continuous working; NORDIMPIANTI Slipformer machines are
The machine is available with two or three Internationally proven;
vibration stages in order to attain the best Most of mechanical parts are galvanized for
concrete compaction; durability and easy maintenance;
Third party components are sourced from the
Production flexibility worlds most renowned suppliers;
Element height from 80 mm up to 1000 mm;
The Slipformer is able to produce a wide range User friendly
of prestressed concrete elements such as The use of anti-wear materials to extend their
hollow core slabs for floors and Walls, inverted working life.
T and I-Beams, inverted double T slabs, Wear parts designed to be easily changed
vineyard posts, lintels, solid slabs, half slabs reducing downtime to a minimum.
and grandstand panels; The forming inserts can be quickly changed
It is possible to insert steel wire mesh to enable production of slabs with different
reinforcement; profiles or heights;

ONLY
NORDIMPIANTI
The hollow core slabs can
be produced with certifiable
fire resistances up to 180
TECHNOLOGY
minutes without changing any
components on the machine.

15
 HOLLOW CORE SLABS MADE BY SLIPFORMER sf

The right solution to manufacture both floor and

wall elements with different sizes

WHATS RIGHT FOR YOU?

Wall Elements Floor Elements Floor Elements

1200 mm wide 1200 mm wide 1200 mm wide

h80 mm Kg/m 162 h80 mm Kg/m 158 h200 mm Kg/m 308

h100 mm Kg/m 182 h100 mm Kg/m 175 h220 mm Kg/m 322

11
hole h120 mm Kg/m 203
h120 mm Kg/m 212 h250 mm Kg/m 342

11 7
hole
hole h150 mm Kg/m 247
h150 mm Kg/m 257
h300 mm Kg/m 379

h200 mm Kg/m 303

h200 mm Kg/m 311

h400 mm Kg/m 448

h220 mm Kg/m 322

Concrete h250 mm Kg/m 352

Experience h500 mm Kg/m 567

16
Slipformer User friendly, proven reliability

Floor Elements Special Elements

1200 mm wide 1200 mm wide

Wall panels with coloured aggregate finish

h500 mm Kg/m 596

Insulated Sandwich Wall panels

3
hole h800 mm Kg/m 852

h600 mm Kg/m 676

Grandstand Panels

h700 mm Kg/m 759 h1000 mm Kg/m 1123

SPECIAL
PROFILE
ONLY
W I T H
h 1000 NORDIMPIANTI
TECHNOLOGY
EXCEEDING EXPECTATIONS
FOR INDUSTRIAL AND COMMERCIAL BUILDINGS

17
 h1000 Special Profiles
Slipformer JUMBO

18
 LARGE HOLLOW CORE SLABS
h 500 mm UP TO 1000 mm high h1000
The large hollow core slabs S-floor JUMBO series have heights from 500 mm to 1000 mm and
are available in widths of 600 mm or 1200 mm.
A P P L I C A T I O N

The slabs produced by NORDIMPIANTIs Slipformer are cast through a combination of concrete
dosage and vibration ensuring a high level of compaction along every point of the element.

This series of elements have a particular constant

cross section with two large lateral voids and a
smaller centre void. Steel mesh can be inserted into
the ribs and the lower part of the element.
The main applications of these special elements are:
Tunnels, anti-landslide and avalanche guards;
Decking systems for road viaducts and bridges with
spans of more than 15m;
Industrial flooring systems.

Slipformer JUMBO
SPECIAL PROFILES 600-1200 mm wide, 500-1000 mm high
ONLY FROM NORDIMPIANTI
1200 mm wide 600 mm wide
2+1 HOLE 1 HOLE

h 500 mm h 500 mm
Kg/m2 596 Kg/m 358

h 600 mm h 600 mm
The presence of voids means a Kg/m2 676 Kg/m 338
reduction in slab weight. This results
in a lighter floor with a solid/void
ratio of less than 0.5

h 700 mm h 700 mm
Kg/m2 759 Kg/m 379

h 800 mm h 800 mm
Kg/m2 852 Kg/m 426

h 1000 mm h 1000 mm
Kg/m2 1123 Kg/m 561

19
 HOLLOW CORE WALL PANELS
In residential, commercial or industrial building sectors hollow core slabs can be used as a
wall element.
A P P L I C A T I O N
Hollow core wall panels have an excellent finish on both sides, one side because the
elements are cast on steel beds the other side because the element is smoothed by the
slipformer meaning that the final element requires no further finishing, painting can be
done only if required.
To improve the architectural aspect of the panel one side can be manufactured with a finish
incorporating different coloured agregates using a special topping machine. This allows
economic production of high quality wall elements.
The elements can also incorporate insulating material between the hollow core slab and the
concrete topping to increase the acoustic and thermal properties.

TOPPING MACHINE SLIPFORMER COMBINED WITH TOPPING MACHINE

The production of this particular element is

simple and cost effective and doesnt require a
large investment outlay on equipment. It can be
manufactured on the same production bed as used
for floor elements.
The thicknesses of both the elements and insulation
can be varied as required in sandwich wall panels.

Concrete
Experience

20
Possibility to have different coloured aggregate finishes

21
Grandstand Panels
Produced by Slipformer Technology
GRANDSTAND PANELS
In infrastructure hollow core slabs can also
be used for the construction of stadium
seating.

3 hole

Concrete
Experience

23
3.1 | ENGLISH VERSION

adv | eventra.it
Hollow Core Slabs
Applications

NORDIMPIANTI SYSTEM SRL

Via Erasmo Piaggio, 19/A
66100 Chieti (CH) - Italy
Tel. +39 0871 540222
Fax +39 0871 562408
[email protected]
www.nordimpianti.com

THE PRODUCTS IN THE PICTURES MAY HAVE SOME ACCESSORIES NOT INCLUDED WITH THE BASIC MACHINE.
THE DATA GIVEN IS STRICTLY INFORMATIVE. NORDIMPIANTI RESERVES THE RIGHT TO MODIFY THIS DATA WITHOUT PRIOR NOTICE.