Scribd
Upload
28 views2 pages

FIBARO Door/Window Sensor: Z-Wave Protocol Implementation Conformance Statement

prueba

Uploaded by

Johannes Zapata
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views2 pages

FIBARO Door/Window Sensor: Z-Wave Protocol Implementation Conformance Statement

prueba

Uploaded by

Johannes Zapata
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Z-Wave Protocol Implementation Conformance Statement

FIBARO Door/Window Sensor


General Information

Product Identifier: FGK-10X


Brand Name: FIBARO
Product Version: HW: 1 FW: 3.02
Z-Wave Certification #: ZC10-16025002

Z-Wave Product Information

Supports Z-Wave Beaming Technology? No


Supports Z-Wave Network Security? Yes
Supports Z-Wave AES-128 Security S0? Yes
Supports Security S2? No

Z-Wave Technical Information

Z-Wave Frequency: U.S./Canada/Mexico


Z-Wave Product ID: 0x2001
Z-Wave Product Type: 0x0701
Z-Wave Hardware Platform: ZM5202
Z-Wave Development Kit Version: 6.51.06
Z-Wave Library Type: Enhanced 232 Slave
Z-Wave Device Type / Role Type: Notification Sensor / Reporting Sleeping Slave

Association Group Information

Group # / Max Description


Nodes
1/1 Lifeline reports the device status and allows for assigning single device only (main controller by default).
2/5 Control is assigned to the device status (reed sensor and IN input) - sending BASIC SET control frames to
the associated devices.
3/5 Alarm is assigned to the device status - sending alarm frames to the associated devices. Its value may be
modified via advanced parameters.
4/5 Sensor ZW3 is assigned to the device status (reed sensor and IN input) - sending BASIC SET control frames
to the associated devices. This group provides backward compatibility with controllers not supporting
Z-Wave+.

Copyright 2012-2016 Z-Wave Alliance. All Rights Reserved. All Logos property of respective rights' holders, no claim intended. Generated @ May 31, 2017
Z-Wave Protocol Implementation Conformance Statement
(Continued)
FIBARO Door/Window Sensor

5/5 Tamper ZW3 is assigned to the TMP switch - sending alarm frames to the associated devices in case a TMP
button is released. This group provides backward compatibility with controllers not supporting Z-Wave+.

Supported Command Classes (17):


Application Status Association Group Information
Association V2 Battery
Configuration CRC16 Encapsulation
Device Reset Local Firmware Update MD V3
Manufacturer Specific V2 Multi-Channel-Association_V3
Notification V5 Powerlevel
Security Sensor Multilevel V5
Version V2 Wake-Up V2
Z-Wave Plus Info V2

Controlled Command Classes (3):


Basic Multi-Channel_V4
Time Parameters

Copyright 2012-2016 Z-Wave Alliance. All Rights Reserved. All Logos property of respective rights' holders, no claim intended. Generated @ May 31, 2017

You might also like