Level 1 & 2 Service Manual

6809510A67-O

MOTORIZR™Z8

UMTS 2100, GSM 850/900/1800/1900 MHz

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office.
All other product or service names are the property of their respective owners.

© Motorola, Inc. 20007.

All rights reserved.

Mobile Devices Business,

Sawgrass International Concourse
789 International Parkway
Room S2C
Sunrise, FL 33325-6220
 1 and 2
Level 1 and 2 Service Manual Z8 UMTS Contents
6809510A67-O
Contents

Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Product Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Product Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Product Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Regulatory Agency Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Computer Program Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About This Service Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty Service Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Parts Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Controls, Indicators, and Input/Output (I/O) Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Tools and Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Removing and Replacing the Battery Door and Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Removing and Replacing the Subscriber Identity Module (SIM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Removing and Replacing the Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Removing and Replacing the Rear Housing and Transceiver Board Assembly . . . . . . . . . . . . . . . . . . . . 17
Removing and Replacing the Expansion PC Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Removing and Replacing the GSM/3G-2100 MHz TX Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Subscriber Identity Module (SIM) and Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Personality Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Manual Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Programming: Software Upgrade and Flexing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Exploded View Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Exploded View Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

6809510A67-O June 07, 2007 1

Contents Z8 UMTS

2 June 07, 2007 6809510A67-O

 Z8 UMTS
6809510A67-O
Level 1 and 2 Service Manual 1 and 2

Introduction
Motorola® Inc. maintains a worldwide organization that is dedicated to provide
responsive, full-service customer support. Motorola products are serviced by an
international network of company-operated product care centers as well as autho-
rized independent service firms.
Available on a contract basis, Motorola Inc. offers comprehensive maintenance and
installation programs which enable customers to meet requirements for reliable,
continuous communications.
To learn more about the wide range of Motorola service programs, contact your local
Motorola products representative or the nearest Customer Service Manager.

Product Identification
Motorola products are identified by the model number on a label usually located
under the battery. Use the entire model number when inquiring about the product.
Numbers are also assigned to chassis and kits. Use these numbers when requesting
information or ordering replacement parts.

Product Names
Product names are listed on the front cover. Product names are subject to change
without notice. Some product names, as well as some frequency bands, are available
only in certain markets.

Product Changes
When electrical, mechanical or production changes are incorporated into Motorola
products, a revision letter is assigned to the chassis or kit affected, for example;
-A, -B, or -C, and so on.
The chassis or kit number, complete with revision number is imprinted during
production. The revision letter is an integral part of the chassis or kit number and
is also listed on schematic diagrams, and printed circuit board layouts.

Regulatory Agency Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions:
• This device may not cause any harmful interference, and
• this device must accept interference received, including interference that may
cause undesired operation
This class B device also complies with all requirements of the Canadian Interfer-
ence-Causing Equipment Regulations (ICES-003).
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.

6809510A67-O June 07, 2007 1

 Z8 UMTS

Computer Program Copyrights

The Motorola products described in this manual may include Motorola computer
programs stored in semiconductor memories or other media that are copyrighted
with all rights reserved worldwide to Motorola. Laws in the United States and other
countries preserve for Motorola, Inc. certain exclusive rights to the copyrighted
computer programs, including the exclusive right to copy, reproduce, modify,
decompile, disassemble, and reverse-engineer the Motorola computer programs in
any manner or form without Motorola's prior written consent. Furthermore, the
purchase of Motorola products shall not be deemed to grant either directly or by
implication, estoppel, or otherwise, any license or rights under the copyrights,
patents, or patent applications of Motorola, except for a nonexclusive license to use
the Motorola product and the Motorola computer programs with the Motorola
product.

About This Service Manual

Using this service manual and the suggestions contained in it assures proper
installation, operation, and maintenance of Z8 telephones. Refer questions about
this manual to the nearest Customer Service Manager. This manual contains
mechanical service information required for the equipment described and is current
as of the printing date.

Audience
This document aids service personnel in testing and repairing Z8 telephones.
Service personnel should be familiar with electronic assembly, testing, and
troubleshooting methods, and with the operation and use of associated test
equipment.

Scope
This manual provides basic information relating to Z8 telephones, and also to
provide procedures and processes for repairing the units at Level 1 and 2 service
centers including:
• Unit swap out
• Repairing of mechanical faults
• Basic modular troubleshooting
• Testing and verification of unit functionality
• Initiate warranty claims and send faulty modules to Level 3 or 4 repair
centers.

2 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual

Conventions
Special characters and typefaces, listed and described below, are used in this
publication to emphasize certain types of information.

➧ Note: Emphasizes additional information pertinent to the subject

matter.

G Caution: Emphasizes information about actions which may result in

equipment damage.

E Warning: Emphasizes information about actions which may result

in personal injury.

Keys to be pressed are represented graphically. For example, instead of “Press

P the End key”, you will see “Press P”.

Information from a screen is shown in text as similar as possible to what

displays on the screen. For example, PHONEBOOK.

Information that you need to type is printed in boldface type

Warranty Service Policy

The product is sold with the standard 12 month warranty terms and conditions.
Accidental damage, misuse, and extended warranties offered by retailers are not
supported under warranty. Non warranty repairs are available at agreed fixed
repair prices.

Out of Box Failure Policy

The standard out of box failure criteria applies. Customer phones that fail very
early on after the date of sale, are to be returned to Manufacturing for root cause
analysis, to guard against epidemic criteria. Manufacturing to bear the costs of early
life failure.

Product Support
Customer’s original phones will be repaired but not refurbished as standard.
Appointed Motorola Service Hubs will perform warranty and non-warranty field
service for level 2 (assemblies) and level 3 (limited PCB component). Motorola High
Tech Centers will perform level 4 (full component) repairs.

Customer Support
Customer support is available through dedicated Call Centers and in-country help
desks. Product-Service training should be arranged through the local Motorola
Support Center.

6809510A67-O June 07, 2007 3

 Z8 UMTS

Parts Replacement
When ordering replacement parts or equipment, include the Motorola part number
and description used in the service manual.

When the Motorola part number of a component is not known, use the product model
number or other related major assembly along with a description of the related
major assembly and of the component in question.

Replacement Parts Service Division (RPSD)

Order replacement parts, test equipment, and manuals from RPSD.

U.S.A. Outside U.S.A.

Phone: 800-422-4210 Phone: 847-538-8023

FAX: 800-622-6210 FAX: 847-576-3023

Website: http://businessonline.motorola.com

EMEA

Phone: +49 461 803 1404

Website: http://emeaonline.motorola.com

Asia

Phone: +65 648 62995

Website: http://asiaonline.motorola.com

4 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual

Specifications
Table 1. Specifications

Function Specification

Frequency Range EGSM TX: 880 - 915 MHz

Frequency (MHz) = 890 + (0.2 × n) where: 0 ≤n ≤124
Frequency (MHz) = 890 + (0.2 × (n – 1024)) where: 955 ≤n ≤1023

RX: 925 – 960 MHz

Frequency (MHz) = 935 + (0.2 × n) where: 0 ≤n ≤124
Frequency (MHz) = 935 + (0.2 × (n – 1024)) where: 955 ≤n ≤1023

Frequency Range DCS TX: 1710 to 1785 MHz

Frequency (MHz) = 1710.2 + (0.2 × (n – 512)) where: 512 ≤n ≤885

RX: 1805.2 to 1879.8 MHz

Frequency (MHz) = 1805.2 + (0.2 × (n – 512)) where: 512 ≤n ≤885
Frequency Range PCS TX: 1850 to 1910 MHz
Frequency (MHz) = 1850.2 + (0.2 × (n – 512)) where: 512 ≤n ≤810

RX: 1930 to 1990 MHz

Frequency (MHz) = 1930.2 + (0.2 × (n – 512)) where: 512 ≤n ≤810
Frequency Range UMTS TX: 1920 to 1980 MHz
Frequency (MHz) = UARFCN1 ÷ 5, where: 9612 < UARFCN1 < 9888
UARFCN1 in increments of 25

RX: 2110 to 2170 MHz

Frequency (MHz) = UARFCN1 ÷ 5, where: 10562 < UARFCN1 < 10838
UARFCN1 in increments of 25
Channel Spacing 200 kHz (GSM, DCS, PCS), 5 MHz UMTS
Channels 174 EGSM, 374 DCS, 274 PCS carriers with 8 channels per carrier, 11 UMTS
Duplex Spacing 45 MHz GSM, 95 MHz DCS, 80 MHz PCS, 190 MHz UMTS
Modulation GMSK AT BT = 0.3 (GSM, DCS, PCS), QPSK (UMTS)
Transmitter Phase Accuracy 5 degrees RMS, 20 Degrees peak
Frequency Error + 0.1ppm
Input/Output Impedance 50 ohms (nominal)
Nominal Operating Voltage 3.6 Vdc +10% (battery)
+4.4 Vdc +10% (external connector)
Dimensions (xyz) 107.9 mm, 50.6mm, 15.45mm
Size 77.6 cc
Weight 112 g
Display 16M color TFT, 320 x 240, 2.2”
Battery Life (1030mAh)2 GSM: Talk time: Up to 215 minutes
GSM: Standby time: Up to 220 to 260 hours
WCDMA Talk time: 5 hours
WCDMA Standby time: 384 hours
WCDMA Video talk time: Up to 300 minutes
Nominal Operating -10º C to +55º C
Temperature Range

6809510A67-O June 07, 2007 5

 Z8 UMTS

GSM System Functions Specification

Speech Coding Type Regular Pulse excitation / linear predictive coding with long term prediction
(RPE LPC with LTP)
Bit Rate 13.0 kbps
RF Power Output 32 dBm nominal GSM, 28.5 dBm nominal DCS / PCS
Spurious Emissions -36 dBm from 0.1 to 1 GHz, -30 dBm from 1 to 4 GHz
Receive Sensitivity -102 dBm GSM, -102 dBm DCS / PCS
RX Bit Error Rate < 2%

UMTS System Functions Specification

Speech Coding Type Adaptive Multirate (AMR)
RF Power Output 21 dBm
Spurious Emissions -36 dBm from 0.1 to 1 GHz, -30 dBm from 1 to 4 GHz
Error Vector Magnitude < 17.5%
PN9 Bit Error Rate (VER) 0.1% @12.2K, -106.7 dBm
ACLR -33 dBm @+5 MHz, -43 dBm @+10 MHz

6 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual

Product Overview
Motorola Z8 mobile telephones feature Wideband Code Division Multiple Access
(WCDMA) technology, and global system for mobile communications (GSM) air
interface, The mobile telephone uses a simple icon and graphical-based user
interface (UI) for easier operation, allows short message service (SMS) text
messaging, and includes clock, alarm, datebook, calculator, and caller profiling
personal management tools. The Z8 operates within the GSM 850/900MHz, DCS
1800 MHz, PCS 1900 MHz, and UMTS 2100 MHz bands.
Z8 telephones support HSPDA, GPRS, SMS, and MMS in addition to traditional
circuit switched transport technologies. High Speed Downlink Packet Access
(HSPDA) is a wireless radio broadband data standard adopted by many WCDMA
mobile phone service providers. HSPDA is significantly faster than GPRS,
providing mobile devices with air interface speeds from 384kbps to 3.5Mpbs.
HSPDA, where available, provides substantial increases in mobile data
communications performance and the efficient use of radio spectrum.
HSPDA allows the delivery of advanced mobile services, such as the streaming of
video and music clips, full multimedia messaging, high-speed internet access and
e-mail on the move.
The telephones are made of polycarbonate plastic. The display and speaker, as well
as the transceiver printed circuit board (PCB), microphone, charger and headphone
connectors, and buttons are contained within the thin kicking slider form-factor
housing. The 1030 mAh Lithium Ion (Li Ion) battery provides up to 5 hours of talk
time in UMTS mode with up to 384 hours of standby time1. The phone accepts 3V
and 1.8V mini subscriber identity module (SIM) cards which fit into the SIM holder
under the rear housing cover. The telephone features a 240 x 320, 16M QVGA TFT
color display and an internal antenna.

Features
Z8 telephones use advanced, self-contained, sealed, custom integrated circuits to
perform the complex functions required for GSM and UMTS communication. Aside
from the space and weight advantage, microcircuits enhance basic reliability,
simplify maintenance, and provide a wide variety of operational functions.
Features available include:
• Messaging/WAP: SMS, MMS, EMS, email (POP3/IMAP4/SMTP/SSL), Opera
browser
• OS/Applications: 2-softkey UI version of UIQ 3.1/Symbian 9.2
• Special Features: Media Studio with full Music support and 30fps H.264 video
• Camera: 2MP, 8x digital zoom, Flash
• Video: MPEG4, H.263, H.264
• Audio: MP3, AAC/AAC+/AAC+E, AMR-NB, XMF, WAV / 40 MIDI Levels
• Connectivity: EMU (mini USB), Bluetooth including A2DP, AVACP profiles
• Server based solutions: OMA DM/DS, FOTA, OMA DRM,
• FOTA (Firmware Over The Air)
• Native Media player
• Video capture, playback
• Lower voltage technology that provides increased standby and talk times
• Extended GSM (EGSM) channels

1. All talk and standby times are approximate and depend on network configuration, signal strength, and features selected. Standby
times are quoted as a range from DRX=2 to DRX=9. Talk times are quoted as a range from DTX off to DTX on.

6809510A67-O June 07, 2007 7

 Z8 UMTS

• Tri-coder/decoder (CODEC) that allows full rate, half rate, and enhanced full
rate modes of transmission
• Supports MP3, AAC, AAC+, AAC+ enhanced, MIDI, AMR-NB, Streaming
3GPP
• High quality playback (RV, H.263, MPEG4)
• 5 hour video capture capable
• Downloadable themes (ringers, images, sounds)
• Text to Speech
• Class 12 GPRS (2U/4D)
• Enhanced Bluetooth® profiles, including stereo headset support.
• High Speed synchronization with Desktop with USB 2.0 for faster music and
personal information downloads.
• Large (2.2 inch), high resolution (240x320), (TFT, 262K color display)
• Approximately 80 Mbytes of built-in end user storage expandable to over 4 GB
with removable memory (SD/MMC card)

Simplified Text Entry

Motorola Labs handwriting and predictive text entry. Press a key to generate a
character, and a dynamic dictionary uses this to build and display a set of word or
name options. This feature may not be available on the phone in all languages.

Caller Line Identification

Upon receipt of a call, the calling party’s phone number is compared to the phone
book. If the number matches a phone book entry, that name will be displayed. If
there is no phone book entry, the incoming phone number will be displayed. In the
event that no caller identification information is available, an incoming call message
is displayed.

➧ User must subscribe to a caller line identification service through their service
provider.

Personal Information Management

The Z8 telephone contains a built in calendar with date book reminders and
phonebook that can be synchronized easily to a computer.

8 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual

General Operation
Controls, Indicators, and Input/Output (I/O) Connectors
The Z8 controls are located on the front and back of the device, and on the keyboard,
as shown in Figures 1 and 2.

Handsfree
Microphone Secondary
Camera
Lens
Navigation Key
Scroll up, Bumper Bar
down, left, right
or press centre Left Soft Key Right Soft Key
to select.

Volume Keys Media Player

Home Key Clear/Back Key
Key

Video Call Key Call Key End Key

Make & Turn on & off,
Camera Key answer calls. hang up, exit
menus.
Microphone

070258o
Figure 1. Telephone Controls and Indicators Locations (Front)

Battery Cover

Camera Flash Primary Camera Lens

& Camera On Indicator
SIM Cover

Accessary Connector Port Memory Card

Slot
Insert battery charger &
phone accessories.

061418o
Figure 2. Telephone Controls and Indicators Locations (Back)

6809510A67-O June 07, 2007 9

 Z8 UMTS

Figure 3 shows the main Screen display.

Service Provider
10/Jan/2007 12:00am
Call a contact
Send a message
Jan 10, 2007
Ring
Active profile: General
Live Music Info
00:00
Options Open Contacts
065309o
Figure 3. Main Screen Display

Status Indicators
The following status indicators may appear at the top of the display:
1. Signal Strength Indicator – Vertical bars show the strength of the network
connection. Network services, such as calls may not be available when 1 or
0 appears.
2. Network Indicator – Shows when your phone is using a GSM connection
(standard network access), GPRS connection (high speed network access),
3G connection (highest speed network and video calling) or flight mode (no
network connection).
T GSM U GPRS
f 3G V Flight mode
HSDPA

3. Roam Indicator – Shows when your phone is seeking or using a network

outside your Home network.
4. Bluetooth Indicator – Shows current Bluetooth status. Indicators may
include:
X Bluetooth on X Bluetooth
(green) active (blue)
Ysending

5. Calls Indicator – Shows various call states. Indicators may include:

Z active voice call [ active video
call
\ missed call

6. Message Indicator – Shows when you receive an SMS, MMS, email or

voicemail message. Indicators can include:
] SMS ^ email
_ MMS a voicemail

10 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual

7. Sound Mode Indicator – Shows the current sound mode.

b silent d speakerphone
c microphone muted

Menu Navigation
Z8 telephones are equipped with an icon and graphical-based user interface. All of
the phone’s features can be accessed with a 5-way navigation key that allows you
to move easily through menus and select menu items.

Liquid Crystal Display (LCD)

The LCD provides an large color display with user-adjustable brightness settings
for optimum readability in all light conditions. The large 240 x 320 pixel display
provides room for entering text, viewing graphics, tapping icons, and system
prompts.

➧ Whether a phone displays all indicators depends on the programming and services
to which the user subscribes.

Battery Information

Battery Charge Indicator

The telephone displays a battery charge indicator icon in the idle screen to indicate
the battery charge level. The gauge shows four levels: 100%, 66%, 33%, and Low
Battery.

Battery Removal
Removing the battery causes the device to immediately shut down and any pending
work (partially entered phone book entries or outgoing messages, for example) is
lost.

All batteries can cause property damage and/or bodily injury, such as, burns if a

E conductive material, such as, jewelry, keys, or beaded chains touch exposed termi-
nals. The conductive material may complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any charged battery, particularly when
placing it inside a pocket, purse, or other container with metal objects.

G If the battery is removed while receiving a message, the message will be lost.

➧ To ensure proper memory retention, turn the phone OFF before removing the
battery.

6809510A67-O June 07, 2007 11

 1 and 2
Tools and Test Equipment Z8 UMTS Z8 UMTS
6809510A67-O

Tools and Test Equipment

The following table lists tools and test equipment recommended for disassembly
and reassembly of Z8 telephones. Use either the listed items or equivalents.

Table 1. General Test Equipment and Tools

Motorola Part Number1 Description Application

RSX4043-A Torque Driver Used to remove and replace screws

-- #0 Cross Point Screwdriver Used to remove cross point screws

Torque Driver Bit T-5 Plus, Apex 440-

— Used with torque driver
6IP Torx Plus or equivalent

Torque Driver Bit T-4 Plus, Apex 440-

— Used with torque driver
6IP Torx Plus or equivalent

Used to charge battery and to power

See Table 5 Rapid Charger device

Antistatic Mat Kit (includes 66-80387A95 Provides protection from damage to

0180386A82 antistatic mat, 66-80334B36 ground device caused by electrostatic discharge
cord, and 42-80385A59 wrist band) (ESD)

Disassembly tool, plastic with flat and Used during assembly/disassembly of

6680388B67 pointed ends (manual opening tool) device

6680388B01 Tweezers, plastic Used during assembly/disassembly

— Digital Multimeter, HP34401A2 Used to measure battery voltage

8102430Z04 GSM / DCS Test SIM Used to enable manual test mode

1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) at (800) 422-4210 or
FAX (800) 622-6210; Internationally, AAD can be reached by calling (847) 538-8023 or faxing (847) 576-3023.
2. Not available from Motorola. To order, contact Hewlett Packard at (800) 452-4844.

12 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual Disassembly

Disassembly
The procedures in this section provide instructions for the disassembly of an Z8
telephone. Tools and equipment used for the phone are listed in Table 1, preceding.

G Many of the integrated devices used in this equipment are vulnerable to damage
from electrostatic discharge (ESD). Ensure adequate static protection is in place
when handling, shipping, and servicing the internal components of this equipment.

G Avoid stressing the plastic in any way to avoid damage to either the plastic or
internal components.

Removing and Replacing the Battery Door and Battery

All batteries can cause property damage and/or bodily injury, such as, burns if a

E conductive material, such as, jewelry, keys, or beaded chains touch exposed termi-
nals. The conductive material may complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any charged battery, particularly when
placing it inside a pocket, purse, or other container with metal objects.

1. Ensure the phone is turned off.

2. Grasp both sides of the battery door firmly and slide it in the direction indicated
in Figure 1. The battery door has been designed to fit very snugly onto the
phone.

Battery door

070261o
Figure 1. Removing the Battery Door

3. Lift the battery door completely off the phone.

6809510A67-O June 07, 2007 13

Disassembly Z8 UMTS

4. Lift the end of the battery and remove it completely. See Figure 2.

Battery

070262
Figure 2. Removing the Battery

There is a danger of explosion if the Lithium Ion battery is replaced incorrectly.

E Replace only with the same type of battery or equivalent as recommended by the
battery manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.

5. To replace, align the battery with the battery compartment so the contacts on
the battery match the battery contacts in the phone.
6. Insert the battery, contacts side first, into the battery compartment and push
down.
7. Insert the ridge at the bottom of the battery housing into the base of the phone,
then push the cover down and snap it into place.

14 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual Disassembly

Removing and Replacing the Subscriber Identity Module (SIM)

1. Remove the battery door and battery as described in the procedures.
2. Slide the SIM cover as indicated in Figure 3 and lift it away from the phone.

Sim cover

070263o
Figure 3. Removing the SIM Cover

3. Use the disassembly tool to slide the SIM out of the SIM holder, as shown in
Figure 4.

Disassembly tool
SIM

070264o
Figure 4. Removing the SIM

4. Carefully lift the SIM from the phone.

5. To replace, insert the SIM into the holder, ensuring the keyed corner of the
SIM faces the top edge of the phone.
6. Place the SIM cover onto the phone and slide into position to lock the SIM cover.
7. Replace the battery and battery door as described in the procedures.

6809510A67-O June 07, 2007 15

Disassembly Z8 UMTS

Removing and Replacing the Memory Card

1. Remove the battery door and battery as described in the procedures.
2. Open the memory card cover and slide the memory card inward to unlock it,
then slide the memory card out of the phone.

Memory card door

Memory card

070282o
Figure 5. Removing the Memory Card

3. To replace, insert the memory card, with the metal contacts side facing down,
all the way into the memory card slot until the card locks into position. A click
is heard when the card is inserted correctly.

16 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual Disassembly

Removing and Replacing the Rear Housing and Transceiver Board Assembly

G This product contains static-sensitive devices. Use anti-static handling procedures

to prevent electrostatic discharge (ESD) and component damage.

1. Remove the battery cover, battery, and SIM as described in the procedures.
2. Insert the disassembly tool under the speaker grill and release the grill snaps
at the bottom edge at the front of the phone. Avoid damage to the speaker
located under the speaker grill.

Disassembly tool Speaker grill

070276o
Figure 6. Removing the Speaker Grill

3. Carefully lift it away from the phone.

6809510A67-O June 07, 2007 17

Disassembly Z8 UMTS

4. Use the T5 driver to remove 2 screws under the speaker grill. Set the screws
aside for reuse.

Screws
070275o
Figure 7. Removing the Speaker Grill Screws

5. Use the disassembly tool to release the latches on the top and sides of the
acoustic assembly.

Latch location

Acoustic assembly
070277o
Figure 8. Removing the Acoustic Assembly

18 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual Disassembly

6. Turn the unit over and use the T5 driver to remove the two screws near the
camera lens.

T5 driver
Screw location

Screw location
070283o
Figure 9. Removing the Rear Housing Screws

7. Remove the rear housing from the phone.

8. Carefully turn the unit over and use the disassembly tool to release the keypad
flex connector.

Keypad flex connec

070284o
Figure 10. Removing the Keypad Flex Connector

6809510A67-O June 07, 2007 19

Disassembly Z8 UMTS

9. Use the disassembly tool to release the display flex connector.

Dynamic flex connector

Disassembly tool
070285o
Figure 11. Removing the Dynamic Flex Connector

10. Turn the phone over, lift the bottom end of the transceiver PC board and use
the disassembly tool to release the battery flex connector.

Battery
Flex connector

Transceiver board
070286o
Figure 12. Removing the Battery Flex Connector

11. Carefully remove the transceiver PC board from the phone.

20 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual Disassembly

12. To replace, align the transceiver board next to the rear housing. Connect the
flex connector to the socket on the transceiver PC board. Then carefully flip
the entire PC board over into the rear housing. Ensure that the antenna
connector aligns correctly with the antenna when the transceiver board is
seated in the rear housing. Ensure the transceiver board is properly seated in
the rear housing.

Flex connector
Antenna Antenna connector

Transceiver PC board
070290o
Figure 13. Replacing the Transceiver Board

13. Replace the transceiver PC board, rear housing, SIM, battery & battery door
as described in the procedures.

6809510A67-O June 07, 2007 21

Disassembly Z8 UMTS

Removing and Replacing the Expansion PC Board

G This product contains static-sensitive devices. Use anti-static handling procedures

to prevent electrostatic discharge (ESD) and component damage.

1. Remove the battery door, battery, SIM & rear housing and transceiver PC
board as described in the procedures.
2. Using the disassembly tool, carefully slide the 2 side key switchdomes out of
their slots on both sides of the rear housing assembly. Avoid damage to the flex
cables.
3. Using the disassembly tool, carefully pry the expansion PC board out of the
rear housing assembly (see Figure 14).

Disassembly tool Side key switchdomes

Expansion board

Side key switchdomes

070296o
Figure 14. Removing and Replacing the Small PCB

4. To replace, insert the expansion pc board and board to board connector.

5. Install the two side key switchdomes.
6. Replace the rear housing, SIM, battery & battery door as described in the
procedures.

22 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual Disassembly

Removing and Replacing the GSM/3G-2100 MHz TX Antenna

1. Use the disassembly tool to release the antenna from the rear housing (see
Figure 15).

Antenna assembly

070291o
Figure 15. Removing the GSM/3G 2100 MHz Antenna

2. To replace, align the antenna assembly to the phone.

3. Carefully press the antenna assembly into position until the antenna assembly
latches snap into position.

6809510A67-O June 07, 2007 23

Subscriber Identity Module (SIM) and Identification Z8 UMTS

Subscriber Identity Module (SIM) and Identification

SIM
A SIM is required to access the existing local GSM network, or remote networks
when traveling (if a roaming agreement has been made with the provider).
The SIM contains:
• All the data necessary to access GSM services.
• The ability to store user information, such as phone numbers.
• All information required by the network provider to provide access to the net-
work.

Personality Transfer
A personality transfer is required when a phone is express exchanged or when the
main board is replaced. Personality transfers reproduce the customer's original
personalized details, such as menu and stored memory, such as phone books, or
even just program a unit with basic user information, such as language selection.
Z8 telephones use Motorola Phone Tools synchronization software to effect a
personality transfer.

Identification
Each Motorola GSM device is labeled with a variety of identifying numbers. The
following information describes the current identifying labels.

Mechanical Serial Number (MSN)

The Mechanical Serial Number (MSN) is an individual unit identity number and
remains with the unit throughout the life of the unit.
The MSN can be used to log and track a unit on Motorola's Service Center Database.
The MSN is divided into 4 sections, as shown in Figure 16.

000807a
Figure 16. MSN Label Breakdown

24 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual Subscriber Identity Module (SIM) and Identification

International Mobile Station Equipment Identity (IMEI)

The International Mobile station Equipment Identity (IMEI) number is an
individual number unique to the PCB and is stored within the unit's memory.
The IMEI uniquely identifies an individual mobile station and thereby provides a
means for controlling access to GSM networks based on mobile station types or
individual units. The full IMEI structure is listed in Table 2.

Table 2. IMEI Number Breakdown

TAC Serial Number Check Digit

NNXXXXXX ZZZZZZ A

Where
TAC Type Allocation Code, formerly known as Type Approval Code
NN Reporting body identifier
XXXXXX Type Identifier
ZZZZZZ Individual unit serial number
A Phase 1 = 0.
Phase 2 = check digit defined as a function of all other IMEI digits
Other label number configurations present are:
• TRANSCEIVER NUMBER: Identifies the product type. Normally the SWF
number. (i.e. V100).
• PACKAGE NUMBER: Identifies the equipment type, mode, and language in
which the product is shipped.

6809510A67-O June 07, 2007 25

Troubleshooting Z8 UMTS

Troubleshooting
Manual Test Mode
Motorola Z8 telephones are equipped with a manual test mode capability. This
allows service personnel to verify functionality and perform fault isolation by
entering keypad commands.
To enter the manual test command mode, a GSM / DCS test SIM must be used.
1. Turn the phone OFF.
2. Remove the battery as described in the procedures.
3. Remove the customer’s SIM card from the phone as described in the
procedures.
4. Insert the test SIM into the SIM slot.
5. Replace the battery as described in the procedures.
6. Turn the phone ON.

Troubleshooting Chart

Table 3. : Level 1 and 2 Troubleshooting Chart

SYMPTOM PROBABLE CAUSE VERIFICATION AND REMEDY
1. Telephone will not turn on or stay on. a) Battery either discharged or Measure battery voltage across a 50 ohm (>1
defective. Watt) load. If the battery voltage is <3.25 Vdc,
recharge the battery using the appropriate
battery charger. If the battery will not recharge,
replace the battery. If battery is not at fault,
proceed to b.
b) Battery connectors open or Visually inspect the battery connectors on both
misaligned. the battery and the telephone. Realign and, if
necessary, either replace the battery or refer to
a Level 3 Service Center for the battery
connector replacement. If battery connectors
are not at fault, proceed to c.
c) Transceiver board assembly Forward to an authorized level 3 service center.
defective.
d) keyboard assembly failure. Replace the keyboard assembly. Temporarily
connect a +3.6 Vdc supply to the battery
connectors. Press and hold the PWR button. If
unit turns on and stays on, disconnect the dc
power source and reassemble with the new
keyboard assembly.
2. Telephone exhibits poor reception or a) Antenna assembly defective. Check to make sure that the antenna pin is
erratic operation, such as calls frequently properly connected to the transceiver board
dropping or weak or distorted audio. assembly. If connected properly, substitute a
known good antenna. If the fault is still present,
proceed to b.
b) Transceiver board assembly Forward to an authorized level 3 service center.
defective.

26 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual Troubleshooting

Table 3. : Level 1 and 2 Troubleshooting Chart (Continued)

SYMPTOM PROBABLE CAUSE VERIFICATION AND REMEDY
3. Display is erratic, or provides partial or a) Transceiver board connections Remove rear chassis assembly from unit, check
no display. faulty. general condition of flexible printed cable (flex).
If the flex is good, check that the flex connector
is fully pressed down. If not, check connector to
transceiver board connections. If faulty
connector, replace the transceiver board
assembly. If connector is not at fault, proceed to
b.
c) Transceiver board assembly Forward to an authorized level 3 service center.
defective.
4. Incoming call alert transducer audio Faulty transceiver board assembly. Replace the transceiver board assembly (refer
distorted or volume is too low. to 1c). Verify that the fault has been cleared and
reassemble the unit with the new transceiver
board assembly.

5. Telephone transmit audio is weak. a) microphone obstructed by user Verify transmit audio quality. If transmit audio
(usually indicated by called parties while holding the phone quality is still weak and microphone is not
complaining of difficulty in hearing voice). obstructed, proceed to b.
b) Microphone defective. Replace the microphone as described in the
procedures. If fault is not cleared, proceed to c.
c) Transceiver board defective. Forward to an authorized level 3 service center.
6. Receive audio from earpiece speaker is a) Connections to or from transceiver Gain access to the transceiver board assembly
weak or distorted. board assembly defective. as described in the procedures. Check flex and
the flex connector to the transceiver board
assembly. If flex connector is at fault, proceed to
d. If connection is not at fault, proceed to b.
b) Antenna assembly defective. Check to make sure the antenna is installed
correctly. If the antenna is installed correctly,
substitute a known good antenna assembly. If
this does not clear the fault, reinstall the original
antenna assembly and proceed to d.
c) Transceiver board assembly Forward to an authorized level 3 service center.
defective.
7. Telephone will not recognize or accept a) SIM defective. Check the SIM contacts for dirt. Clean if
SIM. necessary and check if fault has been cleared. If
the contacts are clean, insert a known good SIM
into the telephone. Power up the unit and
confirm that the SIM has been accepted. If the
fault no longer exists, replace the defective SIM.
If the SIM is not at fault, proceed to b.
b) Transceiver board assembly Forward to an authorized level 3 service center.
defective.
8. Vibrator feature not functioning. Transceiver board assembly Forward to an authorized level 3 service center.
defective.
9. Internal Charger not working. Faulty charger circuit on transceiver Test a selection of batteries in the rear pocket of
board assembly. the desktop charger. Check LED display for the
charging indications. If these are charging
properly, then the internal charger is at fault.
Replace the transceiver board assembly (refer
to 1c). Verify that the fault has been cleared and
reassemble the unit with the new transceiver
board assembly.

6809510A67-O June 07, 2007 27

Troubleshooting Z8 UMTS

Table 3. : Level 1 and 2 Troubleshooting Chart (Continued)

SYMPTOM PROBABLE CAUSE VERIFICATION AND REMEDY
10. Real Time Clock resetting when Lithium button cell in the display Refer service to a Level 3 service center for
standard battery is removed. board may be depleted. replacement.
11. No or weak audio when using headset. a) Headset not fully pushed home. Ensure the headset plug is fully seated in the
jack socket. If fault not cleared, proceed to b.
b) Faulty jack socket on transceiver Replace the transceiver board assembly (refer
board assembly. to 1c). Verify that the fault has been cleared and
reassemble the unit with the new transceiver
board assembly.

Programming: Software Upgrade and Flexing

Contact your local technical support engineer for information about equipment and procedures
for flashing and flexing.

28 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual Troubleshooting

Exploded View Diagram

6
7
8
9
10
13
11
18
14
19

27
28

29

30

1 2
4
15
3 5
12 16
17

20 23
21
24
25
22
26
v459714
Figure 17. Exploded View Diagram

6809510A67-O June 07, 2007 29

Troubleshooting Z8 UMTS

Exploded View Parts List

Part numbers are only provided as a reference. Contact your local Motorola parts
organization for current part number information.

Table 4. Exploded View Parts List

Part
Item Description Item Part Number Description
Number
1 0103582P01 Cover Alert Speaker 19 0303529E03 Screw M1.4x2.5mm

2 0303529E05 Screw K15x8.5mm 0103560E01 MPXL Camera

20 1503608E01 MPXL Camera grommet
3 0103597E02 Endo Audio Assy 21 0103613P01 Battery assembly flex
4 0503578C18 RF grommet 22 0103515P02 Rear housing assembly
5 0103564P01 Alert speaker 23 0103698E02 Expansion PCB assembly
6 Front housing assembly 24 0503578C11 Transflash card grommet
7 0103580P01 Keyboard navigation 25 0503578C10 USB grommet
8 7271449E04 Display assembly 26 CFHN9093A SIM Card Bezel
9 1503579B14 VGA camera grommet 27 SNN5792A Battery
10 0103562E01 VGA camera 28 CFHN9089A Battery door
11 0103666E04 Flex slider module 29 0303529E04 Screw M1.6 x 4.5mm
12 0103509P02 Keyboard assembly 30 0503578C22 Screw cover
13 0103664E02 Flex dynamic 31 1503579B13 Microphone grommet
14 0703577C39 Bridge support assembly
15 0371235E01 Screw M1.2 x1.75mm
16 4203641D10 Grounding clip left
17 4203641D11 Grounding clip right
18 0103535E02 Slider assembly

30 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual Troubleshooting

Accessories
Table 5. Accessories
Accessory Description Kit Number
Audio and Media
H3 Bluetooth Headset Dark Pearl Grey SYN1507
H500 Bluetooth headset Black Softtouch SYN1374
H500 Bluetooth Headset Hot Pink SYN1525
H500 Bluetooth Headset iPOD Blue SYN1523
H500 Bluetooth Headset iPOD Gold SYN1524
H500 Bluetooth Headset Spa Blue SYN1527
H500 Bluetooth Headset White SYN1526
H500 Gloss Black SYN1375
H500 Nickel Japan SYN1441
H500 Pink SYN1436
Headset Mono One Touch w/ Send-End (EMU) SYN0896
Headset Stereo 3.5mm SYN1302
Bluetooth Stereo Transceiver DC800 SYN1001
RAZR H3 Black SYN1437
RAZR H3 Silver SYN1438
Stereo Headset - EMU SYN1301
H350 BT Headset Black SYN1439
JBL Black On Tour Portable Speaker SYN1451
JBL On Tour Mobile European Kit OnTourMBBLKE
JBL On Tour Mobile portable speaker US Kit OnTourMBBLK
JBL On Tour Mobile speaker PRC kit CH1414A
JBL On Tour Mobile speaker UK kit OnTourMBBLKU
S805 DJ Headset - Bluetooth - Music and Telephony SYN1673
H500 Bluetooth Headset Fire Red SYN1667
H500 Bluetooth Headset Celery SYN1732
H500 Bluetooth Headset Pumpkin SYN1733
H500 Bluetooth Headset Steel Teal SYN1734
H500 Bluetooth Headset Oi SYN1735
H3 Bluetooth Headset Cherry Red SYN1736
H350 Bluetooth Headset Sapphire Blue SYN1738
H350 Bluetooth Headset Silver Sail SYN1764
H350 Bluetooth Headset Dark Pearl Grey SYN1763
H350 Bluetooth Headset Silver Quartz SYN1765
D&G Gold H700 SYN1769
Blue/Black Cingular Only H700 SYN1508
Black H700 (not available in North America) SYN1509
Blue H700 (Verizon only in North America) SYN1618
Bluetooth Module (Stereo Music and Telephony) SYN1447

6809510A67-O June 07, 2007 31

Troubleshooting Z8 UMTS

Table 5. Accessories (Continued)

Accessory Description Kit Number
Bluetooth Stereo Headset & Controller S705 SYN1711
Bluetooth Headset - HS850 (Refresh - Black) SYN1107
Bluetooth Headset - HS850 (Refresh - Blue) SYN1226
Bluetooth Headset (Pearl Dark Gray) - H300 SYN1297
Bluetooth Headset (Pink) - H300 SYN1417
Bluetooth Headset (Pure White) - H300 SYN1416
Bluetooth Headset - H605 SYN1303
Bluetooth Mono Headset, Nickel- H500 SYN1290
Bluetooth Stereo Headset HT820 SYN0948
Bluetooth Headset - H700 (silver) SYN1311
Automotive
Bluetooth Car Kit - Asia/Americas S9642
Bluetooth Car Kit - Euro S9643
Bluetooth Car Kit - HF850 98675H
Bluetooth Car Kit - IHF1000 - Americas/Asia 98676J
Bluetooth Car Kit - IHF1000 - EMEA CFLN1232AB
BT Pro-Install Carkit IHF1000r 98676K
T605 Pro Install Bluetooth Carkit SYN1782A
Bluetooth Car Kit - High Tier, T505 SYN1717
Bluetooth Car Kit - Mid Tier, T305 SYN1716
Data and Enterprise
1GB microSD card & Mot SD adapter SYN1406
128MB microSD card & Mot SD adapter SYN1403
Bluetooth TXTR Keyboard (silver) SYN1391
2GB microSD card & Mot SD adapter SYN1407
SD 128MB card SYN1659
SD 1GB card SYN1584
SD 256MB card SYN1589
SD 2GB card SYN1585
SD 512MB card SYN1583
SD 64MB card SYN1658
SD 4GB SYN1586
256MB microSD card & Mot SD adapter SYN1404
32MB microSD card & Mot SD adapter SYN1401
512MB microSD card & Mot SD adapter SYN1405
64MB microSD card & Mot SD adapter SYN1402
Bluetooth Class 1 USB Adapter PC850 SYN1244
Digital Accessories
Data Cable Mini USB/USB/Serial SKN6371
Mobile Phone Tools Region-specific

32 June 07, 2007 6809510A67-O

Level 1 and 2 Service Manual Troubleshooting

Table 5. Accessories (Continued)

Accessory Description Kit Number
Modules
Reverb (Oakley Stereo Bluetooth Eyewear - BLK) SYN1552
Reverb (Oakley Stereo Bluetooth Eyewear - WHT) SYN1553
REVERB (Oakley Stereo Bluetooth Eyewear Br. Sm.) SYN1554
Bluetooth Helmet Adapter (Mage) - HS830 SYN0996
Oakley RAZRWIRE (Mercury: NA) - H7 98679H
Oakley RAZRWIRE (Pewter/Black: NA) - H7 98677H
Oakley RAZRWIRE (Plantinum/Rootbeer: NA) - H7 98678H
Power and Personalization
Battery BC70 (SC6) Li-Ion 1000 mAh SNN5769
Charger Adapter - Aust/NZ Plug SYN8127
Charger Adapter - Euro Plug SYN7456
Charger Adapter - UK Plug SYN7455
Charger Adapter EMU/EMU (Y-cable) SKN6222
Travel Charger EMU Mid-Rate Switcher - Argentina SPN5192
Travel Charger EMU Mid-Rate Switcher - Australia SPN5193
Travel Charger EMU Mid-Rate Switcher - BRAZIL SPN5187
Travel Charger EMU Mid-Rate Switcher - EURO SPN5189
Travel Charger EMU Mid-Rate Switcher - INDIA SPN5194
Travel Charger EMU Mid-Rate Switcher - MEXICO SPN5186
Travel Charger EMU Mid-Rate Switcher - PRC SPN5188
Travel Charger EMU Mid-Rate Switcher - TWN SPN5216
Travel Charger EMU Mid-Rate Switcher - UK/HK SPN5190
Travel Charger EMU Mid-Rate Switcher - US ENG SPN5185
Travel Charger EMU Rapid Switcher - Argentina SPN5197
Travel Charger EMU Rapid Switcher - BRAZIL SPN5196
Travel Charger EMU Rapid Switcher - HK SPN5199
Travel Charger EMU Rapid Switcher - MEXICO SPN5200
Travel Charger EMU Rapid Switcher - PRC SPN5198
Travel Charger EMU Rapid Switcher - US SPN5202
Travel Charger EMU Rapid TWN SPN5270
Vehicle Power Adapter EMU - VC700 SYN0847
Battery-Only-Charger for SC batteries, HongKong plug SYN1486A
Battery-Only-Charger for SC batteries, PRC plug SYN1492A
Battery-Only-Charger for SC batteries, Taiwan plug SYN1485
Battery-Only-Charger for SC batteries, US/Euro plug SYN1484
BATTERY-ONLY-CHARGER FOR KC/BK BATTERIES US PLG SYN1699A
Battery-Only-Charger, KC (BK) battery, PRC plug SYN1700
P320 desktop BOC (battery-only-charge), platform, EMU SPN5394

6809510A67-O June 07, 2007 33

Troubleshooting Z8 UMTS

Table 5. Accessories (Continued)

Accessory Description Kit Number
P320 desktop BOC, platform, EMU, Chinese label SPN5395
Travel Charger EMU Mid-Rate Switcher - JAPAN SPN5274
Travel Charger EMU Rapid Switcher - Japan SPN5275

34 June 07, 2007 6809510A67-O

 1 and 2
Z8
Level 1 and 2 Service Manual 6809510A67-O Index
IndexIndex
Z8 UMTS

A IMEI 25
antenna, removing and replacing 23
L
B LCD 11
battery liquid crystal display (LCD) 11
charge indicator 11
function 11
M
removing 13 manual test mode 26
battery housing memory card, removing and replacing 16
removing 13 message indicator 10
Bluetooth indicator 10 MSN 24

C N
caller ID 8 names
calls indicator 10 product 1
Canadian Interference-Causing Equipment regulations 1 network indicator 10
changes
product 1
conventions 3 O
copyrights operation 9
computer software 2 battery 11
controls, indicators, and I/O connectors 9
LCD 11
D menu navigation 11
disassembly 13

P
E part numbers
exploded view diagram 29 accessories 31
exploded view parts list 30 parts
exploded view diagram 29
F exploded view parts list 30
FCC rules 1 product
features changes 1
caller ID 8 identification 1
text entry 8 names 1
product overview 7
features 7
I
identification 24
international mobile station equipment identity 25 R
mechanical serial number 24 rear housing
product 1 removing 17
regulatory agency compliance 1
removing
antenna 23
battery 11, 13
battery housing 13
memory card 16
rear housing 17
SIM 15

6809510A67-O June 07, 2007 Index-1

Index Z8 UMTS

transceiver board 17 V
replacement parts voicemail message indicator 10
contact information 4
replacing
antenna 23
W
warranty service 3
battery 13
memory card 16
rear housing 17
SIM 15
transceiver board 17
roam indicator 10

S
serial number
mechanical 24
service manual
about 2
revisions 3
scope 2
service policy 3
customer support 3
out of box failure 3
product support 3
service procedure
ordering replacement parts 4
shut down
upon battery removal 11
signal strength indicator 10
SIM card 24
personality transfer 24
replacing 15
SIM, removing and replacing 15
sound mode indicator 11
specifications 5
status indicators 10
support
customer 3
product 3

T
text entry 8
tools and test equipment 12
troubleshooting 26
manual test mode 26

Index-2 June 07, 2007 6809510A67-O