Microscope Report
Microscope Report
The first electromagnetic lens was developedin 1926 by Hans Busch.In 1937,
Manfred von Ardenee invent scanning electron microscope.However every inventor
were contribute a lot for evolution of science nowaday but the main contributer was
Hans Busch and Zacharias Jansen.
Objective:
1)To learn structure of microscope
2)To learn ways to protect and carry microscope
3)To understand function of every part of microscope
4)Make and use a wet mount
5)To learn how to adjust ocluar lens to prevent dizziness of using microscope for a
long period of time
6)To learn correctly use a compound light microscope
7)To learn how to calculate the power of magnification
8)To learn how to control the light intensity when changing power of objective lens
9)To learn how to make image clearer by adjust x-axis and y-axis of the object
10)To learn the procedure before starting an experiment
Methods
Microscope perparation
When preparng microscope slides for observation, its essential to having those
important material such as slides, cover slides, dropper ,methylene blue ,distilled
water and so on which is required for this experiment.Materials are advise to
examine carefully as one of the prominent for preparation.There are two type of
preparation which is temorary munt and permanent mount.Temporary mount, in
other ward called wet mount which means the specimen is placed in a drop of water
held between the slide and coverslide by surface tension.However,permanent
mount or generally called as prepared mount which remove all the water and
replace it to parafin.The preparation must be short enough so that able to prepare
temporary mount.other than that,Microscope should be treated with care; put one
hand on the arm and the other under the base of the microscope when carrying
it.Thus,carry one microscope carefully and properly from the microscope storage
area to the working area.So,Examine the microscope and give the function of each
of the parts is the examaniation which everyone should envisage it.
4)Reason that why should we scan a specimen under scanning power before using
high magnification power of objective lens:
The reason that why should we do that is because scanning power for objective lens
is to initialy find specimen before moving to high magnification.After using scanning
power, we are able to increase the magnification power in order to focus it and
provide a better and clearer image.
5)Briefly discuss how the correct waysto keep and carry the microscope:
Firstly, remove the slide which usen for the experimen from the microscope and
dispose or clean it.Then turn off the light and the power and following up remove
the plug to allow the microscope to cooldown under room temperature.After that,
adjust the stage all the way down by stage control.Moreover, cleaned the objective
lens with lens paper.
6)Describe diffirent structure between animal celles(human cheek cells) and plant
cells(onion cell):
Animal cells(human cheek Structure Plant cells(onion cell)
cell)
References
https://en.wikipedia.org/wiki/Electron_microscope
http://www.keyence.com/ss/products/microscope/bz-x700/stu
dy/optics/001/
http://bioweb.uwlax.edu/aplab/lab-unit-01/lab-01-04.html
https://ibg102.wordpress.com/2013/04/05/lab-1-principles-an
d-use-of-microscope/
http://wendy01pd2013.wikispaces.com/file/view/*microscope
+lab+report.pdf
http://www.microscope-microscope.org/basic/preparing-micro
scope-slides.htm
http://advice.writing.utoronto.ca/types-of-writing/lab-report/