Scribd
Upload
40 views

Staircase Design: Loads On Going Loads On Waist Slab

The document provides design specifications and calculations for a staircase, including load calculations, bending moment calculation, required steel reinforcement area and spacing. The effective span is 2.89m, riser is 175mm, tread is 254mm, and waist slab thickness is 125mm. Self weight, live, and floor finish loads were calculated. The required bending moment is 19kN-m. The area of main steel reinforcement required is 435sqmm spaced 260c/c or 462c/c. The area of distribution steel is 150sqmm spaced 335c/c or 524c/c.

Uploaded by

Sita G Shrestha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views

Staircase Design: Loads On Going Loads On Waist Slab

The document provides design specifications and calculations for a staircase, including load calculations, bending moment calculation, required steel reinforcement area and spacing. The effective span is 2.89m, riser is 175mm, tread is 254mm, and waist slab thickness is 125mm. Self weight, live, and floor finish loads were calculated. The required bending moment is 19kN-m. The area of main steel reinforcement required is 435sqmm spaced 260c/c or 462c/c. The area of distribution steel is 150sqmm spaced 335c/c or 524c/c.

Uploaded by

Sita G Shrestha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Staircase Design

Client: PRAMILA

Data
Effective Span (l) 2.89 mm m
Riser (R) 175 mm
Thread (T) 254 mm
Waist Slab thickness (t) 125 mm
Clear Cover 15 mm
Effective Depth of Waist Slab (d) 110 mm

Grade of Concrete (fck) 20 MPa


Grade of Steel (fy) 500 MPa

Loading
Loads on going Loads on waist slab
Self weight of waist slab 3.79 KN/m Self weight of landing slab 3.13 KN/m
Self weight of steps 2.19 KN/m Live Load 3.00 KN/m
Live Load 3.50 KN/m Floor Finish Load 1.20 KN/m
Floor Finish Load 2.50 KN/m Total Load 7.33 KN/m
Total Load 11.98 KN/m Factored Load 10.99 KN/m
Factored Load 17.97 KN/m

Bending Moment
Calculate Bending Moment using the equation (W*L*L )/8

Bending Moment = 19 KN-m

Reaction
to be used as UDL = 26 KN
60 KN-m

Area of Main Steel


Ast 435 sqmm

Spacing
Diameter of bar 12 16
Spacing across x 260 c/c 462 c/c

Provded Main Steel:

Area of Distribution Steel


Ast 150 sqmm

Spacing
Diameter of bar 8 10
Spacing across y 335 c/c 524 c/c

Provided Distridution Steel:

You might also like