Scribd
Upload
1K views

NMS Installation

1. Create a virtual network adapter to assign an IP address for the database. Install MySQL server and assign it the IP address. 2. Install OTNM 2000 in server mode, selecting the MySQL database and IP address. Replace the license file and start the EMS services. 3. Login to OTNM2000 using the default username and password of "admin".

Uploaded by

Suraj Sikarwar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

NMS Installation

1. Create a virtual network adapter to assign an IP address for the database. Install MySQL server and assign it the IP address. 2. Install OTNM 2000 in server mode, selecting the MySQL database and IP address. Replace the license file and start the EMS services. 3. Login to OTNM2000 using the default username and password of "admin".

Uploaded by

Suraj Sikarwar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 28

NMS installation

NMS installation
1.Creat a Virtual Network.

2.DATABASE IP SETTING

3.install the MySQL server

4.OTNM 2000 installation


1.Creat a Virtual Network.
1
To install virtual network card wright click on
My computer located on the desktop. Select
Manage. Then select Device Manager.
right click on User Name Example I clicked
DiponkarGhosh here. Select Add legacy
hardware.

2
1.Creat a Virtual Network.

Here you see new window comes up. Click Next.


1.Creat a Virtual Network.

Select Install the hardware that I manually select from


a list.(advance).
1.Creat a Virtual Network.

Select Network adapters then click next.


1.Creat a Virtual Network.

Select Microsoft in the left side of the table and select


Microsoft Loopback Adapter from the wright side of the
table. Click Next and then click finish.
2.DATABASE IP SETTING

(1)Now Go to Network And Sharing


Center. And Change Adapter Setting
Select Microsoft Loopback Adapter

(2)Right Click on Microsoft Loopback


Adapter and select Propertise

(3)From the propertise select


the Internet Protocol Version
4(TCP/IPv4) Double click on it.
2.DATABASE IP SETTING

(4)Select Use the following


IP address This IP is given
from fiberhome, put this new
IP address and put subnet
mask then click ok. This is
your database IP.
3.install the MySQL server.

To install MySQL copy the Mysql folder in the Drive D.


Keep in mind that the Mysql folder should not contain any other folder in it.
Now From the Start menue Run the Command prompt as administrator.
Run these commands as follow:
C:\Document and Settings\Administrator>d:
D:\>cd mysql\bin
D:\ mysql\bin>mysqld.exe -install MySQL --defaults-file=\"d:\mysql\my.ini\"

After in the command


prompt it shows Service
successfully installed
then installation is complete
3.install the MySQL server

Now we need to start the


service of Mysql just we
installed .

To start the service..


Right clickMy Computer
then Select Manage then
select services and
applications then select
services.

From the list of services select


the Mysql and right click
on Mysql and start the
service.
4.OTNM 2000 installation
(1)Right click on Setup.V2.0R5(Build04.20.05.50BD4) and run as
administrator.
4.OTNM 2000 installation
(2)Click Next
4.OTNM 2000 installation
(3)Click Yes
4.OTNM 2000 installation

(4)Click Next
4.OTNM 2000 installation

(5)Select English
4.OTNM 2000 installation

(6)Select Server mode


4.OTNM 2000 installation
(7)Then select Mysql
4.OTNM 2000 installation
(8)Add the Customer IP address here, which is given from the
customer and earlier you put it on the microsoft loopbacl adaptar.
This is your database IP address.

Here we must sellct the IP to


100.1.1.0
4.OTNM 2000 installation
(9)Software will be installed in the same drive MySQL is installed . Do
not modify anything here. This software must be installed in the
same drive same folder MySQL is installed. Click Next
4.OTNM 2000 installation
(10)Typical is selected We dont need to modify it
now, Click Next
4.OTNM 2000 installation
(11)Click Next
4.OTNM 2000 installation
(12)Software will now install autometically wait for couple of minutes
till the finish window comes.
4.OTNM 2000 installation
(13)Run the cmd as administrator and put these commands as follow:
D:
cd otnm\md\alldb\mysql
cd otnm\md\alldb\mysql>creatalldbroot.cmd
4.OTNM 2000 installation
(14)Copy the
otnm2000.lic file which
is given by Fiberhome
to
D\OTNM\md\bin
to replace it .
4.OTNM 2000 installation
Now You need to start all the EMS services
To start the EMS services go to
D:\OTNM\ui\sbin\service
Run as administrator
start_ems_main_service You can
also run the services manually.
Now check all the services are
started or not by Right Clicking to
My Copmputer then select on
propertise then select Services and
double click on services
Select EMS services and start All
EMS services Which are not
Disabled. Do not do anything with
Disabled services.
4.OTNM 2000 installation
Now Select the OTNM2000 on Desktop and log in
using password as admin.
Thank you!

You might also like