Scribd
Upload
99 views

Welding Procedure Specification (WPS) : Posco Engineering & Construction Co., LTD

This document is a welding procedure specification (WPS) that outlines the parameters for welding a joint, including information about the base and filler metals, preheat and interpass temperatures, welding positions, electrical characteristics, and layer details. It specifies the joint design, materials, welding process, filler metal type and size, current type, voltage and amperage ranges, gas type, travel speed range, and other technique details. The WPS is intended to ensure consistent welding that meets standards and produces a sound weld.

Uploaded by

Moroko69
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
99 views

Welding Procedure Specification (WPS) : Posco Engineering & Construction Co., LTD

This document is a welding procedure specification (WPS) that outlines the parameters for welding a joint, including information about the base and filler metals, preheat and interpass temperatures, welding positions, electrical characteristics, and layer details. It specifies the joint design, materials, welding process, filler metal type and size, current type, voltage and amperage ranges, gas type, travel speed range, and other technique details. The WPS is intended to ensure consistent welding that meets standards and produces a sound weld.

Uploaded by

Moroko69
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Page 1 of 2

POSCO ENGINEERING & CONSTRUCTION CO., LTD.

WELDING PROCEDURE SPECIFICATION (WPS)


PROJECT NAME :
WPS NO. DATE REV. NO. DATE
SUPPORTING PQR NO. (S)
WELDING PROCESS TYPE

JOINT JOINT DETAIL

JOINT DESIGN

BACKING/RETAINER YES NO

BACKING MATERIAL/RETAINER

BASE METALS

P-NO. GR. NO. TO P-NO. GR. NO.

or SPEC. TYPE AND GR. TO

SPEC. TYPE AND GR.

or CHEM. ANALYSIS AND MECH. PROP. TO

CHEM. ANALYSIS AND MECH. PROP.

THICKNESS : GROVE

RANGE FILLET

PIPE DIA. RANGE

FILLER METALS PREHEAT


F-NO. A-NO. PREHEAT TEMP. MIN.
SFA NO.

AWS NO. (CLASS) INTERPASS TEMP.MAX.


SIZE OF FILLER METAL

DEPOSITED WELD METAL PREHEAT MAINTENANCE


THICKNESS RANGE

FLUX TRADE NAME POSTWELD HEAT TREATMENT

CONSUMABLE INERT TEMP. RANGE

OTHERS HOLDING TIME RANGE

GAS

POSITIONS SHIELDING GAS (ES)

POSITION OF GROVE PERCENT COMPOSITION MIX

PROGRESSION UP DOWN GAS BACKING FLOW RATE

POSITION OF FILLET TRAILING GAS

FORM No.: QP-020A(0)


Page 2 of 2

ELECTRICAL CHARACTERISTIC TECHNIQUE

CURRENT TYPE (AC or DC) STINGER OR WEAVE BEAD

POLARITY ORIFICE OR GAS CUP SIZE

AMPS RANGE INITIAL AND INTERPASS CLEANING

VOLTS RANGE

TUNGSTEN ELCTRODE SIZE AND TYPE METHOD OF BACK GOUGING

OSCILLAITON

MODE OF METAL OF METAL TRANSFER


CONTACT TUBE TO WORK DISTANCE
(ONLY GMAW)

MULTIPLE OR SINGLE PASS

OTHER TRAVEL SPEED (RANGE)

PEENING

OTHER

FILLER METAL CURRENT VOLT TRAVEL SPEED


LAYER NO. PROCESS OTHER
CLASS DIAMETER TYPE AMP RANGE RANGE RANGE

NOTES

PREPARED BY APPROVED BY & CERTIFIED BY REVIEWED BY

WELDING ENG'R QUALITY ENGINEER/3rd PARTY OWNER

SIGN

DATE

FORM No.: QP-020B(0)

You might also like